04-21-2017, 10:12 AM | #1 |
Drives: 2012 SS Camaro RS A6 Join Date: Apr 2017
Location: Spring Hill, Florida
Posts: 41
|
Directions not included, Radar.
Couple questions, I'm not going to ask how to wire my radar to the mirror because I already know it's here and I've already searched.
So the question I need help with please is- Can someone point me to the thread that explains how to wire a mirror-tap for a Escort in a 2012 SS? I see alot of people already asked and got the answer " pin such and such", how do you know what pin is what? Does the harness read like a book, if so how do you know which is the top and bottom? Also I still would need to know how to remove the overhead console without breaking anything. Hopefully there is a write-up I've missed somewhere. Thank you in advance.. |
04-21-2017, 03:09 PM | #2 |
Drives: 2013 2SS RS Hurst NPP Join Date: May 2012
Location: Perrysburg, OH
Posts: 233
|
Here is the original post that I referenced when i did my install: http://www.camaro5.com/forums/showthread.php?t=53330
That should get you what you need...good luck!
__________________
No Worries
CAI Intake w/washer relocation and race scoop Ported Throttle Body (Polished) Kooks LT stepped headers 1-3/4 to 1-7/8 High Flow Cats Livernois Motorsports Stage 2c Cam Package https://www.youtube.com/watch?v=AKXyCyBh9BU Hill Start Assist Delete |
04-21-2017, 03:36 PM | #3 |
Drives: 2012 SS Camaro RS A6 Join Date: Apr 2017
Location: Spring Hill, Florida
Posts: 41
|
Thank you thank you !!! That's what I was looking for. So helpful.
|
05-01-2017, 09:49 AM | #4 |
Drives: 2012 SS Camaro RS A6 Join Date: Apr 2017
Location: Spring Hill, Florida
Posts: 41
|
Figures, my mirror is different, has the backup camera, and the wires are completely different. I can't even get voltmeter probes into them for a reading. Arg.
|
|
|
|
|