Where can I buy 3.91 gears? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

OHIOSS · 07-30-2013, 11:09 PM

I want to change my rear end gears to a 3.91 in my 2010 SS with M6 manual. I have had a hard time finding a place to buy these gears. Anyone have a source I can check out? Is there anything about these gears being installed that I need to know?

Any idea of cost to have them installed?

Russ

62nalide · 07-30-2013, 11:15 PM

I'm not 100% sure but doesn't GM sell them? I'd like to know also.

axis · 07-31-2013, 12:46 AM

Jannetty lists them on his site. I'd imagine a local Chevy dealer near you would have them as well. I know Rhino either has them in stock or can get them since he's based out of a dealership.

CHMSC · 07-31-2013, 12:59 AM

Apex and JDP as well as other vendors sell them. So do the stealerships.

axis · 07-31-2013, 01:30 AM

Apex is $40 cheaper than Ted and has free shipping. I looked at JDP but couldn't find them. Their site is hard to find stuff in though.

dixonk · 07-31-2013, 01:55 AM

If you are looking at swapping the gears and using your carrier I have been quoted anywhere between 600 and 1200 dollars. 600 is providing it doesn't need any shims or anything. Plus the cost of fluid and gaskets. Most of the vendors have the gears.

Apex Motorsports · 07-31-2013, 04:30 AM

Quote:

Originally Posted by CHMSC

Apex...

Quote:

Originally Posted by axis

Apex is $40 cheaper than Ted and has free shipping. I looked at JDP but couldn't find them. Their site is hard to find stuff in though.

Give us a shout! We are bringing a few sets to Camaro5Fest if you are going.

67motorcat · 07-31-2013, 09:35 AM

Around $250 or less directly from GM.

Around $200 or less to install if you take the Pumpkin out of the car....
The shops around here anyway.

Our local guy has installed 5 sets for our Club members in the last year.Not a single one needed any shims or anything.....

About 1-1/2 hours to install..... 2 hours with beers.....Fits like a glove.

OHIOSS · 07-31-2013, 03:04 PM

Quote:

Originally Posted by Apex Chase

Give us a shout! We are bringing a few sets to Camaro5Fest if you are going.

I will be at Camarofest tomorrow. I will for sure look you up!

b20 · 07-31-2013, 09:23 PM

WHAT PART OF OHIO ARE U IN I HAVE DONE A FEW AT MY SHOP

34coupe · 08-01-2013, 07:46 AM

b20........looking forward to installing mine here soon!!

Bell040 · 08-01-2013, 10:00 AM

Is it easier/cheaper/better to buy the 3.91 gears ($200) and have a shop install them ($???)?

... or buy a full 1LE pumpkin ($1400, gmpartsdirect), swap it (???), and sell the old 3.45 pumpkin ($400-500)?

After seeing a guy at the track have his brand new gears come apart in the burn out pit

, the full pumpkin from GM is tempting.

JDP Sales · 08-01-2013, 04:38 PM

I'm pretty sure we have them at the best price currently. Part # 22813040 for reference.

Feel free to call, PM or email me anytime with questions. We have 3 sets in stock and ready to go!

Best regards,

Tyler
888-308-6007

Nightmare2012 · 08-01-2013, 06:06 PM

http://paceperformance.com/i-1030675...-gear-kit.html

by far the cheapest ive seen

07-30-2013, 11:09 PM	#1
OHIOSS Russ Drives: Yukon Denali, Charger, CamaroSS Join Date: Jun 2009 Location: Ohio Posts: 2,811	Where can I buy 3.91 gears? I want to change my rear end gears to a 3.91 in my 2010 SS with M6 manual. I have had a hard time finding a place to buy these gears. Anyone have a source I can check out? Is there anything about these gears being installed that I need to know? Any idea of cost to have them installed? Russ

07-30-2013, 11:15 PM	#2
62nalide Drives: 2013 SS Join Date: May 2013 Location: DFW Posts: 4,102	I'm not 100% sure but doesn't GM sell them? I'd like to know also. __________________ https://frankensteined.net/ Martin@Frankensteined.net

07-31-2013, 12:46 AM	#3
axis Search Ninja Drives: 2010 Black 2SS/RS A6 Join Date: Oct 2009 Location: Central Ark Posts: 7,183	Jannetty lists them on his site. I'd imagine a local Chevy dealer near you would have them as well. I know Rhino either has them in stock or can get them since he's based out of a dealership. __________________ 2010 Black 2SS/RS A6 Halltech CF 102 fed GPI modded intake manifold Bo (knows) White ported TB Kooks LT's/ Dynomax VT Pfadted (springs/sways) Dyno tuned by Rhino and GPI I once parallel parked a train.

07-31-2013, 12:59 AM	#4
CHMSC ROAD COURSE JUNKIE Drives: 2012 SS/RS LS3 Join Date: Oct 2012 Location: Somewhere Posts: 4,868 View My Garage	Apex and JDP as well as other vendors sell them. So do the stealerships. __________________

07-31-2013, 01:30 AM	#5
axis Search Ninja Drives: 2010 Black 2SS/RS A6 Join Date: Oct 2009 Location: Central Ark Posts: 7,183	Apex is $40 cheaper than Ted and has free shipping. I looked at JDP but couldn't find them. Their site is hard to find stuff in though. __________________ 2010 Black 2SS/RS A6 Halltech CF 102 fed GPI modded intake manifold Bo (knows) White ported TB Kooks LT's/ Dynomax VT Pfadted (springs/sways) Dyno tuned by Rhino and GPI I once parallel parked a train.

07-31-2013, 01:55 AM	#6
dixonk Drives: 2011 Audi Q7 Join Date: Mar 2013 Location: Elk Grove, CA Posts: 1,084	If you are looking at swapping the gears and using your carrier I have been quoted anywhere between 600 and 1200 dollars. 600 is providing it doesn't need any shims or anything. Plus the cost of fluid and gaskets. Most of the vendors have the gears.

07-31-2013, 09:35 AM	#8
67motorcat Blown Cool Breeze Drives: 2011 Black on Black 2SS M6 Join Date: Jul 2010 Location: Pinehurst NC Posts: 1,027 View My Garage	Around $250 or less directly from GM. Around $200 or less to install if you take the Pumpkin out of the car.... The shops around here anyway. Our local guy has installed 5 sets for our Club members in the last year.Not a single one needed any shims or anything..... About 1-1/2 hours to install..... 2 hours with beers.....Fits like a glove. __________________ 2011 Black on Black 2SS M6 Had a 2010 IBM 2SS M6 Enjoy life.Think of all the women on the Titanic who passed up dessert.

07-31-2013, 09:23 PM	#10
b20 Drives: 2013 1LE RS 1SS Join Date: Apr 2009 Location: barberton ohio Posts: 320	WHAT PART OF OHIO ARE U IN I HAVE DONE A FEW AT MY SHOP

08-01-2013, 07:46 AM	#11
34coupe Drives: 2010 RS/SS 1934 Ford Coupe Join Date: Jan 2013 Location: Akron,Ohio Posts: 57	b20........looking forward to installing mine here soon!! __________________

08-01-2013, 10:00 AM	#12
Bell040 Drives: 2SS/RS - Black - GFX Join Date: Nov 2008 Location: B'ham, Alabama Posts: 2,458 View My Garage	Is it easier/cheaper/better to buy the 3.91 gears ($200) and have a shop install them ($???)? ... or buy a full 1LE pumpkin ($1400, gmpartsdirect), swap it (???), and sell the old 3.45 pumpkin ($400-500)? After seeing a guy at the track have his brand new gears come apart in the burn out pit , the full pumpkin from GM is tempting. __________________ Ordered: 10-13-08 Built: 3-30-09 (#1691) Recieved: 6-12-09 Blacked out, Cammed (Lunati Voodoo 233/245, .578/.598 @114°, +4°), ARH LTs, VR OTR CAI, Cutouts, and lots of other fun mods.

08-01-2013, 04:38 PM	#13
JDP Sales Drives: Chevys at the limit Join Date: Nov 2010 Location: SLC, UT Posts: 9,621	I'm pretty sure we have them at the best price currently. Part # 22813040 for reference. Feel free to call, PM or email me anytime with questions. We have 3 sets in stock and ready to go! Best regards, Tyler 888-308-6007

08-01-2013, 06:06 PM	#14
Nightmare2012 come find out;) Drives: stockish 2012 camaro ss Join Date: Oct 2012 Location: speed county Posts: 2,166 View My Garage	http://paceperformance.com/i-1030675...-gear-kit.html by far the cheapest ive seen Last edited by Nightmare2012; 08-01-2013 at 10:44 PM.