tuning software

[Tampa Tuning]

Ill be calibrating several LLTs next week. If they have been calibrated already, they is what needs to be done to use HP Tuners:

this is what we know so far:
a. Stock pcm reads & writes without issue
b. Trifecta tuned pcm's will NOT read out. They tuner lock their pcm's
c. To fix a trifecta tuned pcm you'll need to either use their handheld flasher to flash back to stock, this SHOULD work, though I don't believe its been tested yet or flash it to a 2011 VIN/os via MDS or similar and then flash it back to the correct VIN in order to fully overwrite the OS.
d. IPF tuned pcm's will NOT read out. They tuner lock their pcm's
e. To fix a IPF tuned pcm you'll need flash it to a 2011 VIN/os via MDS or similar and then flash it back to the correct VIN in order to fully overwrite the OS.

Phil

[RubyCamaro]

My pile of parts awaiting install along with getting the tune is getting higher & higher. If room in the garage! LOL

I am glad progress is being made.


SOON!

[pgustavson]

Originally Posted by MagnumForceGB

Think the Camaro became self-aware and killed Matt.

Originally Posted by KMPrenger

Dang, I knew Matt was good, but I didn't know he was so good, that he could program these cars to become self-aware. Now that is good!

Originally Posted by Nutbutt

Tron, the ECU absorbed him ! It now tunes itself.

Originally Posted by menendez1293

I guess you could say the stock tune is the MCP and Tron went in to overwrite

Data plans people, data plans...

[hunterv6]

Lol switch it to wifi. Problem solved.

Sent from my SAMSUNG-SM-N900A using Tapatalk 4

[RubyCamaro]

Status?????

[redleader]

Can someone send me a 2010 V6 1LT ECU Flash download file please ?

[RS111341]

Originally Posted by redleader

Can someone send me a 2010 V6 1LT ECU Flash download file please ?

not yet...I'm pretty sure we are still in the testing phase

[redleader]

Originally Posted by RS111341

not yet...I'm pretty sure we are still in the testing phase

Any one will do.
I believe anyone with an OBDII adaptor can do it?

[RS111341]

Originally Posted by redleader

Any one will do.
I believe anyone with an OBDII adaptor can do it?

Its not a tune, its a method to tune. Eventually someone will make an email file that we will be able to upload to our cars but for now its going to take someone that knows his HPT stuff and a dyno

[redleader]

Originally Posted by RS111341

Its not a tune, its a method to tune. Eventually someone will make an email file that we will be able to upload to our cars but for now its going to take someone that knows his HPT stuff and a dyno

Thanks, Yes, I understand ... I just want a file to R'n'D with :-)

[GretchenGotGrowl]

Originally Posted by redleader

Thanks, Yes, I understand ... I just want a file to R'n'D with :-)

If you already have the HPT suite, you can contact Bill @ HPTuning and see if he needs anymore beta testers. If not, then you'll have to wait until release and upgrade to the newest version. From there just pull your stock calibration, make a copy and go at it.

[RS111341]

You can buy the tuning suite. HP Tuners.com will have what you're looking for. I'd rather have somebody that knows what they are doing tune mine, I'd hate to brick my ECM so I haven't looked all that's needed to tune it but I think you need the software, hardware and credits to make it work

[RubyCamaro]

Come on guys! I need to get into the shop & get this stuff done. Status? Any updates?

[RubyCamaro]

No progress this week????????