idatalink maestro dash kit - Installed - Page 7 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Camaro2ss6speed · 02-24-2021, 09:50 PM

It all arrives tomorrow ! I can’t wait to install this plane I’m running back up camera and front camera wish me luck guys!

DMan918 · 03-27-2021, 09:45 AM

Hi All,

Couple quick questions.

1. Do I lose the USB port located in my armrest
2. I see there’s the two USB ports in front of the cam1. Can I get a splitter to make them both work? Seems like only one will be plugged in otherwise?

Thank you for your time!

Ponchonutty · 04-01-2021, 01:56 AM

Quote:

Originally Posted by DMan918

Hi All,

Couple quick questions.

1. Do I lose the USB port located in my armrest
2. I see there’s the two USB ports in front of the cam1. Can I get a splitter to make them both work? Seems like only one will be plugged in otherwise?

Thank you for your time!

You can only use one unless your radio has multiple inputs

TheBrightSide · 03-22-2024, 02:44 AM

Did you ever have any issue with the lock/unlock button on the head unit not working? I have a Kenwood DMX709S head unit, and the touch screen controls for the heated seats and rear windshield defroster also don't work as well. The key fob lock and unlock buttons (separate) still work.

Also note that the door unlock/lock button on the center of the head unit, seems to only work when the door is opened and it briefly gives power. After the dome light goes off (if set to door open/close), the lock/unlock center console button no longer has power; that is, unless you either turn the key in the ignition, hit the locks on the key fob, or open the door.

I tried checking all the fuses and relays, which are good and mainly in the engine bay fuse box. I even checked the 2nd fuse box that's in the driver side of the dash, on the side of the fan vent; nothing. I didn't bother going to the 3rd fuse "box" located in the trunk, under the carpet and mats, since I think there's nothing related there, not to mention it requires the trunk panels to be removed....

iMaestro dash kit buttons not working

03-27-2021, 09:45 AM	#86
DMan918 Drives: 2012 Camaro SS Convertible 6MT Join Date: Jun 2020 Location: Algonquin, IL Posts: 258	Hi All, Couple quick questions. 1. Do I lose the USB port located in my armrest 2. I see there’s the two USB ports in front of the cam1. Can I get a splitter to make them both work? Seems like only one will be plugged in otherwise? Thank you for your time! Last edited by DMan918; 03-27-2021 at 10:20 AM.

03-22-2024, 02:44 AM	#88
TheBrightSide Drives: 2010 Chevy Camaro 2SS coupe (MT) Join Date: Jan 2024 Location: Sacramento, CA - USA Posts: 44	iMaestro dash kit buttons not working Did you ever have any issue with the lock/unlock button on the head unit not working? I have a Kenwood DMX709S head unit, and the touch screen controls for the heated seats and rear windshield defroster also don't work as well. The key fob lock and unlock buttons (separate) still work. Also note that the door unlock/lock button on the center of the head unit, seems to only work when the door is opened and it briefly gives power. After the dome light goes off (if set to door open/close), the lock/unlock center console button no longer has power; that is, unless you either turn the key in the ignition, hit the locks on the key fob, or open the door. I tried checking all the fuses and relays, which are good and mainly in the engine bay fuse box. I even checked the 2nd fuse box that's in the driver side of the dash, on the side of the fan vent; nothing. I didn't bother going to the 3rd fuse "box" located in the trunk, under the carpet and mats, since I think there's nothing related there, not to mention it requires the trunk panels to be removed.... iMaestro dash kit buttons not working

02-24-2021, 09:50 PM	#85
Camaro2ss6speed Drives: Chevrolet Camaro 2ss Join Date: Feb 2020 Location: SoCal Posts: 116	It all arrives tomorrow ! I can’t wait to install this plane I’m running back up camera and front camera wish me luck guys!