08-02-2014, 03:56 PM | #1 |
Driver window doesn't work but indexing does
I took the door panels off to do a speaker replacement and when I put everything back together I found the driver side window doesn't work when I press the switch, but the automatic drop and raise when I open and close the door does.
The passenger side works fine from both switches. I played around a bot with the harness and I got it to work once but I'm not sure how. I put it back together and it doesn't work again :( I thought to try the indexing reset but if that's not it I will not be able to complete the learning. Does anyone have any ideas? I'm thinking of just ordering a replacement switch and see if that's the problem, but I'd rather not if this is something else... Thanks, Andrew |
|
08-02-2014, 04:33 PM | #2 |
Buick 455 Fan
Drives: 1970 Buick, 2012 1SS LS3 Join Date: Jun 2010
Location: Boston MA
Posts: 5,957
|
Issue would seem to be the switch or the wiring to the switch
Open it up again, see if a wire has been damaged
__________________
|
10-30-2015, 08:08 AM | #3 |
USMC Retired
Drives: 2011 2SS/RS Camaro Join Date: Nov 2011
Location: Virginia
Posts: 63
|
Did you ever figure out what the problem was?
|
|
|
|
|