Official AQUA BLUE METALLIC (ABM) Camaro Thread - Page 486 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SROD · 07-10-2013, 07:41 AM

Quote:

Originally Posted by Mudbeast2

I did my engine cove a little different. I wonder how well the paint will hold up over time with the heat?

my paint holds up well on the engine cover. On the fuse panel though mine started to bubble up. i should have put some high temp primer on first. or i did not let it cure long enough. yours looks good by the way!

CruznSS · 07-10-2013, 08:23 AM

Quote:

Originally Posted by SROD

my paint holds up well on the engine cover. On the fuse panel though mine started to bubble up. i should have put some high temp primer on first. or i did not let it cure long enough. yours looks good by the way!

Just a suggestion. If you plan to take it on the track, 1/4, road course, or oval, better off to remove it to be safe. Mine is painted & graphics hydro-dipped. No issues but 1. I don't want to mess up the cover & 2. It traps unwanted heat under the cover. Both of your cars look bad ass by the way.....

Sent from my SPH-L710 using Tapatalk 2

SROD · 07-10-2013, 08:53 AM

thanks for the advice and the compliment! I did drive from tn to fl in one day and didnt notice it ruining. would removing it on ling trios be just as beneficial?

CruznSS · 07-10-2013, 09:08 AM

Wouldn't hurt if left on trips. Just traps heat. I do occasionally raise hood on stops to let heat out & do a quick check on everything. I just installed jba ignition cables....

Took about 15 minutes. Driver side is easy. Back corner passenger side is a bear to get to....

Sent from my SPH-L710 using Tapatalk 2

SROD · 07-10-2013, 09:35 AM

very nice. how much are those?

CruznSS · 07-10-2013, 09:49 AM

$85. Bought from Phastek.com. Quick little upgrade. Still had stock cables on & wanted some a bit thicker.

Sent from my SPH-L710 using Tapatalk 2

SROD · 07-10-2013, 10:08 AM

not bad. i like it! hey! this is post #6800!

LineofPerfection · 07-17-2013, 07:44 PM

My new look front end, what do you think ?

SROD · 07-17-2013, 10:21 PM

looks good! i havent seen an ABM with the hidden lens like that.

CruznSS · 07-17-2013, 11:04 PM

I agree, looks good. Lines look good flowing from headlights thru the heritage grill....

Sent from my SPH-L710 using Tapatalk 2

SummoneR · 07-18-2013, 02:36 AM

Quote:

Originally Posted by LineofPerfection

My new look front end, what do you think ?

Looks great!

Quote:

Originally Posted by SROD

looks good! i havent seen an ABM with the hidden lens like that.

You must have missed it earlier. Post 6605 of this thread.

http://www.camaro5.com/forums/showpo...postcount=6605

CruznSS · 07-18-2013, 03:02 PM

Ok. Replaced my havoc spoiler with the GM dovetail. Had a lot of fitment issues, paint splitting....with the havoc.

Not to hard to install but said a few hail mary's prior to drilling...lol

Sent from my SPH-L710 using Tapatalk 2

RJT Impala · 07-18-2013, 03:13 PM

Looks great! Drilling causes me anxiety as well!

CruznSS · 07-18-2013, 03:34 PM

Anxiety started with center punch, eased a bit with pilot holes but that 5/8 hole turned my stomach. Reminded me of the halo rings.. all good...That top bolt is a bi@ch to get too, worse than taking front bumber off.....

Sent from my SPH-L710 using Tapatalk 2

07-10-2013, 08:53 AM	#6793
SROD THE ROD MAN Drives: 2010 ABM 2SS/RS #631 Join Date: May 2010 Location: TENNESSEE Posts: 558	thanks for the advice and the compliment! I did drive from tn to fl in one day and didnt notice it ruining. would removing it on ling trios be just as beneficial? __________________

07-10-2013, 09:08 AM	#6794
CruznSS Drives: 2SS/RS Camaro ABM - Silver Ralleys Join Date: Jul 2009 Location: Gloucester VA Posts: 1,776 View My Garage	Wouldn't hurt if left on trips. Just traps heat. I do occasionally raise hood on stops to let heat out & do a quick check on everything. I just installed jba ignition cables.... Took about 15 minutes. Driver side is easy. Back corner passenger side is a bear to get to.... Sent from my SPH-L710 using Tapatalk 2 __________________

07-10-2013, 09:35 AM	#6795
SROD THE ROD MAN Drives: 2010 ABM 2SS/RS #631 Join Date: May 2010 Location: TENNESSEE Posts: 558	very nice. how much are those? __________________

07-10-2013, 09:49 AM	#6796
CruznSS Drives: 2SS/RS Camaro ABM - Silver Ralleys Join Date: Jul 2009 Location: Gloucester VA Posts: 1,776 View My Garage	$85. Bought from Phastek.com. Quick little upgrade. Still had stock cables on & wanted some a bit thicker. Sent from my SPH-L710 using Tapatalk 2 __________________

07-10-2013, 10:08 AM	#6797
SROD THE ROD MAN Drives: 2010 ABM 2SS/RS #631 Join Date: May 2010 Location: TENNESSEE Posts: 558	not bad. i like it! hey! this is post #6800! __________________

07-17-2013, 07:44 PM	#6798
LineofPerfection Drives: 2010 2SS Camaro "Big Blue" Join Date: Nov 2009 Location: Versailles, Kentucky Posts: 275	My new look front end, what do you think ? Attached Images __________________ Big Blue

07-17-2013, 10:21 PM	#6799
SROD THE ROD MAN Drives: 2010 ABM 2SS/RS #631 Join Date: May 2010 Location: TENNESSEE Posts: 558	looks good! i havent seen an ABM with the hidden lens like that. __________________

07-17-2013, 11:04 PM	#6800
CruznSS Drives: 2SS/RS Camaro ABM - Silver Ralleys Join Date: Jul 2009 Location: Gloucester VA Posts: 1,776 View My Garage	I agree, looks good. Lines look good flowing from headlights thru the heritage grill.... Sent from my SPH-L710 using Tapatalk 2 __________________

07-18-2013, 03:02 PM	#6802
CruznSS Drives: 2SS/RS Camaro ABM - Silver Ralleys Join Date: Jul 2009 Location: Gloucester VA Posts: 1,776 View My Garage	Ok. Replaced my havoc spoiler with the GM dovetail. Had a lot of fitment issues, paint splitting....with the havoc. Not to hard to install but said a few hail mary's prior to drilling...lol Sent from my SPH-L710 using Tapatalk 2 __________________ Last edited by CruznSS; 08-10-2013 at 11:17 PM.

07-18-2013, 03:13 PM	#6803
RJT Impala Stovebolt BluFlame 6 Drives: '12 2LT/RS, IBM; '20 Traverse Prem Join Date: Oct 2011 Location: Wherever! Posts: 893 View My Garage	Looks great! Drilling causes me anxiety as well!

07-18-2013, 03:34 PM	#6804
CruznSS Drives: 2SS/RS Camaro ABM - Silver Ralleys Join Date: Jul 2009 Location: Gloucester VA Posts: 1,776 View My Garage	Anxiety started with center punch, eased a bit with pilot holes but that 5/8 hole turned my stomach. Reminded me of the halo rings.. all good...That top bolt is a bi@ch to get too, worse than taking front bumber off..... Sent from my SPH-L710 using Tapatalk 2 __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official IMPERIAL BLUE METALLIC (IBM) Camaro Thread	RLHMARINES	Camaro Photos \| Spyshots \| Video \| Media Gallery	2482	02-15-2021 08:21 PM
GM unveils Jay Leno Camaro, Camaro Synergy, Camaro Chroma, Camaro Dusk at SEMA	irocnroll	5th Gen Camaro SS LS LT General Discussions	101	02-27-2012 12:25 PM
ABM (aqua blue metallic) and Camaro Black Concept at St. Louis Auto Show	Liberty1	Camaro Photos \| Spyshots \| Video \| Media Gallery	37	04-17-2011 10:23 AM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 07:05 PM