02-06-2022, 01:29 PM | #1 |
Drives: 2013 ZL1 Join Date: May 2019
Location: Texas
Posts: 111
|
What Coilovers
I am ready to go coilovers and was wondering what everyone would recommend. I have tried to read these forums for Bilstein B6, Ridetech, and Peddars and hear good and bad on all of them. What is everyone running and what magnetic ride delete kit would you recommend or any other necessary parts?
Last edited by diddies; 02-06-2022 at 03:24 PM. |
02-06-2022, 03:18 PM | #2 |
Drives: 2014 ZL1 Join Date: Jun 2009
Location: Tucson, AZ
Posts: 314
|
Peddars XA Extreme on my car with SDE magride delete kit.
They're a little noisy in turns at slow speeds but still way better than magrides overall
__________________
2014 ZL1 M6: Roto Fab Intake, LS3 TB, Long Tube Headers, NPP, Mild 2 Wild, JMS BAP, SMG aux pump, ID 1050X Injectors, DSX Flex Fuel Sensor, 10.5" DSX Lower Pulley, Killer Chiller, Tuned by Ted at JRE, Pedders XA Extreme coilovers, Mickey Thompson Street S/S on Weld S71s
|
02-06-2022, 03:25 PM | #3 |
Drives: 2013 ZL1 Join Date: May 2019
Location: Texas
Posts: 111
|
|
02-06-2022, 03:28 PM | #4 | |
Drives: 2013 ZL1 Join Date: May 2019
Location: Texas
Posts: 111
|
Quote:
Are these the ones you are talking about? Is it just plug and play? |
|
02-06-2022, 04:04 PM | #5 |
Drives: 2014 ZL1 Join Date: Jun 2009
Location: Tucson, AZ
Posts: 314
|
Every so often and out of nowhere I get a "Service Suspension system" warning but my tuner removed the limiter so it's not a factor.
__________________
2014 ZL1 M6: Roto Fab Intake, LS3 TB, Long Tube Headers, NPP, Mild 2 Wild, JMS BAP, SMG aux pump, ID 1050X Injectors, DSX Flex Fuel Sensor, 10.5" DSX Lower Pulley, Killer Chiller, Tuned by Ted at JRE, Pedders XA Extreme coilovers, Mickey Thompson Street S/S on Weld S71s
|
02-06-2022, 04:04 PM | #6 | |
Drives: 2014 ZL1 Join Date: Jun 2009
Location: Tucson, AZ
Posts: 314
|
Quote:
__________________
2014 ZL1 M6: Roto Fab Intake, LS3 TB, Long Tube Headers, NPP, Mild 2 Wild, JMS BAP, SMG aux pump, ID 1050X Injectors, DSX Flex Fuel Sensor, 10.5" DSX Lower Pulley, Killer Chiller, Tuned by Ted at JRE, Pedders XA Extreme coilovers, Mickey Thompson Street S/S on Weld S71s
|
|
|
|
|
|