12-14-2010, 09:47 AM | #43 |
Drives: 2011 Camaro 2-SS Join Date: Nov 2010
Location: Central Fl
Posts: 19
|
The only problem with that suggestion 2010 ss rs, is that you don't get to tell the dealership what to put in when the work is being done under the factory warranty.
I'll be picking my car up today in about an hour or so. I did talk to the mechanic, and he said before he replaced my transmission, he was able to get it to grind when shifting quickly from 1st to 2nd, at about 2500 rpm. He said now that he put a new tranny in, he can shift at any rpm and it does not grind any longer. I'll comment back here after i get to try it myself. |
12-14-2010, 09:56 AM | #44 |
Drives: 2011 2SS/RS SGM Join Date: May 2010
Location: uniontown,PA
Posts: 787
|
same exact thing has been happening to me from day 1.
its going to be hard to get a local dealer to treat me good because i got my car from scotty in WI there are 4 chevy dealers in my area looks like ill be calling them all today.
__________________
---2011 synergy green 2SS/RS---
09/27/2010 - (3800) 10/01/2010 - (4200) 10/09/2010 - (4800) Vehicle on final destination route 10/19/2010 - (5000) delivered to dealer 11/19/2010 - (6000) delivered to customer |
12-14-2010, 09:59 AM | #45 |
Drives: 2011 Camaro 2-SS Join Date: Nov 2010
Location: Central Fl
Posts: 19
|
Exactly the problem I had 6bloodychuncks. Read my post above from '12-03-2010, 12:49 PM'. I have also been working with GM on this one and I reported that dealer as well. If you're getting resistance from that dealership then I would recommend contacting GM for sure. It's probably not a bad idea for anyone having this problem to report it to GM. They need to be made more aware of this problem.
|
12-15-2010, 07:24 AM | #46 |
Drives: 2011 SIM 2SS/RS M6 Join Date: Sep 2010
Location: Sterling, VA
Posts: 75
|
denster, any word on how the fix went for you?
__________________
10/01/2010 - 1102 Order Entered via Web
10/26/2010 - 2000 Order Accepted by GM 10/26/2010 - 2500 Order Preferenced 10/26/2010 - 3000 Order accepted by production control. 10/27/2010 - 3100 Order available to sequence. 10/27/2010 - 3300 Order Scheduled for Production 10/28/2010 - 3400 Order Broadcast 11/12/2010 - 3800 Order produced 11/12/2010 - 4000 Vehicle available to ship 11/12/2010 - 4150 Invoiced 11/12/2010 - 4B00 Your car is bayed and is waiting for transportation by Truck, Rail or transfer to vendor 11/15/2010 - 4200 Shipped |
12-15-2010, 07:43 AM | #47 |
Drives: 2011 Camaro 2-SS Join Date: Nov 2010
Location: Central Fl
Posts: 19
|
Well the problem seems to have gone away, however there are a few strange observations I made. First off, the new transmission seems a little less smooth going through the gears as opposed to the one that was in the car when it was brand new. The second strange observance is that the clutch pedal is so much easier to press down than it used to be. I have a call in to the mechanic that worked on it to ask his opinion why this could be. I'm wondering if they changed the pressure plate or maybe even forgot a return spring on the pedal or something. Not sure, but it doesn't seem to be a problem, just an observance.
I haven't really got on it yet at high rpm, because I was giving it a chance to break in a bit, but the grinding I used to get shifting at 2500 or 3500 appears to have gone away. So the question is, was it the transmission that was bad, or something in the setup. What if everyone's problems are caused becuase the clutch slave cylinder isn't disengaging the clutch completly? You know, this would cause the same effect. Maybe just messing with it and re-installing it was the key? |
12-15-2010, 06:14 PM | #48 |
Drives: 2011 SIM 2SS/RS M6 Join Date: Sep 2010
Location: Sterling, VA
Posts: 75
|
just took my car out. was able to get it to grind anywhere from 3k-4k, didn't go over that. The clutch was definitely all the way in....urgh. Can't get to the dealership until this weekend or next week at best, I will post updates as I go through the process.
__________________
10/01/2010 - 1102 Order Entered via Web
10/26/2010 - 2000 Order Accepted by GM 10/26/2010 - 2500 Order Preferenced 10/26/2010 - 3000 Order accepted by production control. 10/27/2010 - 3100 Order available to sequence. 10/27/2010 - 3300 Order Scheduled for Production 10/28/2010 - 3400 Order Broadcast 11/12/2010 - 3800 Order produced 11/12/2010 - 4000 Vehicle available to ship 11/12/2010 - 4150 Invoiced 11/12/2010 - 4B00 Your car is bayed and is waiting for transportation by Truck, Rail or transfer to vendor 11/15/2010 - 4200 Shipped |
12-22-2010, 01:13 PM | #49 | |
Drives: was a 2010 2SS/RS Join Date: Oct 2010
Location: north carolina
Posts: 169
|
Quote:
|
|
12-23-2010, 04:50 PM | #50 |
Drag Racer
Drives: 2010 2SS/Rs Join Date: Dec 2010
Location: Dallas
Posts: 167
|
nope^^^only if its ****ed already ,,,loook for your clutch to get stuck very soon..and drop the fluid SALVE CYNLINDER ACTUATOR about to go out on yours...trust
|
01-06-2011, 12:48 PM | #51 | |
Drives: Corvette Join Date: Jan 2011
Location: Maryland
Posts: 135
|
Quote:
|
|
01-09-2011, 07:33 AM | #52 |
togtaker
|
I have the 1st-2nd shift problem. I took to the dealer, they said shift slower. I called customer service, they told me to shift slower. I called Tremec they said that was GM blowing smoke. I sent a letter. They ordered my parts this week. They have a redesigned synchro, also replacing the blocker ring. Not easy to get them to do it, but you have to start with your dealer and keep moving up the chain until you get high enough for them to fix the problem.
|
01-09-2011, 10:18 AM | #53 | |
Drives: Corvette Join Date: Jan 2011
Location: Maryland
Posts: 135
|
Quote:
|
|
01-12-2011, 09:19 AM | #54 | |
Drives: was a 2010 2SS/RS Join Date: Oct 2010
Location: north carolina
Posts: 169
|
Quote:
|
|
01-12-2011, 06:37 PM | #55 |
Drives: Fire Engine Join Date: Oct 2008
Location: WPB, Florida
Posts: 1,415
|
Mine has been doing it alot when at the dragstrip. Almost everytime I run. I will probably try to co tact the dealer and get this snowball rolling. I hope they take care of me or this car will be of no use to me.
__________________
12.618 @ 110.75 Bone Stock 1/4 mile
8.165 @ 86.52 Bone Stock 1/8 mile 11.189 @ 124.44 on a 1.73 60' TVS2300 3.4 pulley, JRE tuned, Kooks LT headers and HF cats, MBRP catback exhaust, CAI intake, ADM scoop. Stock wheels/tires. Sold |
01-14-2011, 12:02 PM | #56 |
Drives: 2010 Join Date: Aug 2010
Location: america
Posts: 120
|
upate on my trans : the local dealership i took car in oct after dissmantleing entire trans told me it was shifter and not the trans, they refused to re assemble trans unless i paid for it, i called gm 1000x and argued with them, they told me im on my own and the dealer flagged car in computer so no warranty anymore. they had car for 8 weeks or so, charged me 600 for storage, gave me all the pieces in a box and it cost me 175 for a tow and then 500 to ship car across the state to have trans put back together. the found 2 bad gears and syncros ground over. i bought car used w/ 3100 miles from a dealer that way.... nobody wanted to cover anything after i spent 5500 just for rockland to put everything back together and new clutch ect... all and all im almost 7500 out of pocket and wont get car till next week, i think its bs for gm to screw over customers like this, im submitting all the recipts to my lawyer and we will see.....the kicker is it was in the dealer for other warranty issues that they didnt even bother doing, i simply told them about the grinding, they removed trans on there own, never gave permission to and also....what is the first thing you do to pull trans out of this car???? 1st thing is the shifter, so if you saw an aftermarket shifter that you woulnt warranty ( if it was the prob which it wasnt) doesnt that warrent a phone call explaining that it may not be covered befor you dissassemble the whole thing??????????? this is how i got car back plus a shit ton of dings/dents and scratches. all the gears and everything thrown in a bin and everything else tossed inside the car..... someone please tell me how to post a pic and ill show ya
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Does the v6 have enough power? | cstproductions | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 305 | 08-29-2012 09:27 PM |
Camaro Product Manager - interview | Moose | 5th Gen Camaro SS LS LT General Discussions | 11 | 04-04-2012 06:10 PM |
GM memo to dealers | Moose | 5th Gen Camaro SS LS LT General Discussions | 41 | 02-04-2010 07:33 PM |
Official Camaro Convertible CONCEPT Press Release | Tran | Camaro Convertible Forum | 12 | 11-18-2009 07:05 PM |
Pedders Suspension Benchmark Track Testing and New Jersey Track Day | Info@PeddersUSA.com | USA - NY / NJ / PA | 35 | 10-26-2009 05:20 PM |