Chevrolet Camaro LED Conversion Kit! Upgrade your lighting! Plug & Play Install

[Diode Dynamics]

Full Interior LED Kit - Camaro

At Diode Dynamics, we carry a full line of LED bulbs, to replace your Camaro's map lights, license plate lights, vanity lights, trunk light, turn signals, fog lights, and more!

We carry the brightest, highest-quality bulbs at the lowest prices. Your order will ship same day, and we're here if you need us for support and service. And we do not raise the prices to astronomical levels- We're breaking that market trend, and offering you great, low prices, every day. These LED bulbs are designed by us here in St. Louis, and every bulb carries with it a three-year limited warranty.

Our LED Conversion Kits include all of the LED bulbs you need to replace the incandescent bulbs in your vehicle, for interior and license locations. It has been tested in your specific vehicle, for perfect fitment, and no guesswork! No modification is required for installation, you simply replace the bulbs!


We are pleased to offer these LEDs in a truly customized way. You can create the kit that you prefer. Simply change the quantity to "0" for any bulbs that you do not wish to purchase.


By using the ordering options on this page, you can create your own mix-and-match kit by making the proper selections on each stage, or choose one whole kit that you prefer. The product pictures are professionally taken, at the same camera settings, in order to provide an accurate idea of what the bulbs will look like, in terms of brightness compared to the factory bulbs.

Brightness. We offer three levels of brightness, or "stages." All stages will provide a sharp, modern LED look, and all include the same number of bulbs. Please be sure to read all of the following information:

• Stage 1: Near factory brightness.
• Stage 2: Slightly brighter than factory.
• Stage 3: Much brighter than factory.
• Stage 4 Flexlight: (Trunk only) This is a flexible LED strip with connector, for plug-and-play installation. It replaces your factory trunk light, and can be positioned anywhere you would like, with included velcro and adhesive.

All brightness levels are for general reference only, and apply only to the use of white LEDs. Please see the note below regarding the use of colored LEDs.


Please note that the stage 3 trunk light is often an LED board, which must be installed directly on top of the trunk light housing to achieve maximum brightness. All other lights will fit inside of the light housing with no modification. Some stage 3 interior lights use direct-replacement adapters with an LED board for maximum brightness.


Color. White is our most popular color. It is a 6000K cool LED white. We also offer yellow, green, blue, and red, at no additional charge. When making your color selections, please bear in mind that white projects the most usable light, so white will appear brighter than the same stage of a colored bulb, usually by one stage difference. For example, a red stage 3 light will have a similar usable light output as a stage 2 white light.


All products by Diode Dynamics are backed by a 30-day satisfaction guarantee and a three-year limited warranty.

Need Info? Need to Order? Click Below!

2010-2015 Chevrolet Camaro LED Kit








Need Info? Need to Order? Click Below!

2010-2015 Chevrolet Camaro LED Kit

Questions? Send a PM or email contact@diodedynamics.com or call: (314) 205-3033

*PM us for the free-shipping code* (U.S. forum members only)

Thanks for looking!
Nick C.
Diode Dynamics

[Deke736]

Nick- it's nice to see you on Camaro5! I met you at Gateway last Friday night. I realize I never sent you pics of my car like you had asked, but I think I may have misplaced your card. If you still want to check out my Camaro, click on my signature for my build thread.

Good luck on the lighting sales!

[Diode Dynamics]

Originally Posted by Deke736

Nick- it's nice to see you on Camaro5! I met you at Gateway last Friday night. I realize I never sent you pics of my car like you had asked, but I think I may have misplaced your card. If you still want to check out my Camaro, click on my signature for my build thread.

Good luck on the lighting sales!

Sounds great! I will be sure to check out your build thread! It was nice meeting you, that was an awesome event!

Thanks,
Nick C.

[butters]

The picture above of the map light shows 3 stages, but on the site you can only pick 2. Is the stage 2 white a single bulb or pod? Thanks!

[Diode Dynamics]

The map light LEDs come as a Pair.

For stage 3 map, we need to recheck fitment, because we had a customer say it did not fit properly although we did install it, as shown in pictures. We took it down until we can verify fitment. Thanks!

Nick C

[SinisSick]

Is that a warm white or white in the stage 2 and 3 pics?

[Diode Dynamics]

Originally Posted by SinisSick

Is that a warm white or white in the stage 2 and 3 pics?

That is the "white" color

"Warm White" is going to be similar to the OEM yellow-ish incandescent bulb color.

Nick C.

[zkdreads]

any info on the cupholder light that will be around the circles. the one like you have on the genesis?

[Diode Dynamics]

We have illuminated acrylic for the Camaro, the logo in the center lights up blue...(we will have red soon! red )

I'll have a thread up here soon with pictures and more information

-Nick C.

[DaFisch]

Hopped on these right away! Hope they look great

[Diode Dynamics]

Originally Posted by DaFisch

Hopped on these right away! Hope they look great

There's no hoping involved with our products lol, it's going to look great!


Thanks for your order!
Nick C.

[SinisSick]

how in the world do u install the map lights without scratching the trim?

[Diode Dynamics]

Approach it delicately, a small screwdriver with tape around it generally keeps it from scratching. Or you can invest in some No-Marring interior tools?

Nick C.

[DaFisch]

Installed the trunk, lisence plate, and dome light ones today.. 10/10 great product. Literally spiced up the whole car.