07-19-2015, 06:50 PM | #1 |
Drives: "Bette White" '11 2SS/RS LS3 Join Date: Jul 2014
Location: Grapevine
Posts: 105
|
DRL Harness Not Working (Pass-Side)?
Sorry guys, I know you're sick of the DRL threads, lol, but I searched and searched and couldn't find anything...
Plugged it in, changed the bulbs, turned them on...super stoked to go cruising...drum roll...peek around front...Driver-side fog works fine - looks fantastic(!), pass-side nothing... Tried switching bulbs around in all-sorts of different configurations, to no avail. I figure it must be either the harness, or the wiring, and since they work just fine when the harness is NOT in-line, that leaves one thing, right? Does anybody have a wiring diagram for the config of the DR1/DIYDR1 so I can double-check it...or have [a] different idea(s) as to what else might/could be the problem...? Have to wait until the AM, as it is, and I really don't like driving around with 1 fog out, so figured I'd check and see.
__________________
- Bette White - '11 2SS/RS LS3 /w Driver-Mod, Hurst Short Throw, Rx CC+1LE CSS, Hawk HPS Pads, Apex Motorsports SkipShift Elim, Gen5DIY DRL Harness+P13W/11W/4300K Fogs/DRLs; Otherwise stock - Soon to be spoiled
|
07-19-2015, 07:30 PM | #2 |
HTCC Membership Director
Drives: 2013 RS Camaro Join Date: Jan 2014
Location: Cypress TX
Posts: 277
|
Make sure none of the pins get bent connect the harness. I had that problem and took a while to figure it out.
|
07-19-2015, 08:35 PM | #3 |
Drives: "Bette White" '11 2SS/RS LS3 Join Date: Jul 2014
Location: Grapevine
Posts: 105
|
Yeah, that was one of the first things I checked...Sorry that I didn't specify
__________________
- Bette White - '11 2SS/RS LS3 /w Driver-Mod, Hurst Short Throw, Rx CC+1LE CSS, Hawk HPS Pads, Apex Motorsports SkipShift Elim, Gen5DIY DRL Harness+P13W/11W/4300K Fogs/DRLs; Otherwise stock - Soon to be spoiled
|
07-20-2015, 01:03 PM | #4 |
Drives: 2013 2SS/RS/1LE Join Date: Apr 2010
Location: St Louis, MO
Posts: 3,087
|
Contact gen5diy
|
07-22-2015, 10:40 AM | #5 |
Drives: "Bette White" '11 2SS/RS LS3 Join Date: Jul 2014
Location: Grapevine
Posts: 105
|
I did, new harness on the way as we speak...Just wanted to post while I was waiting to hear from them in case it was something dumb that I messed up, haha.
__________________
- Bette White - '11 2SS/RS LS3 /w Driver-Mod, Hurst Short Throw, Rx CC+1LE CSS, Hawk HPS Pads, Apex Motorsports SkipShift Elim, Gen5DIY DRL Harness+P13W/11W/4300K Fogs/DRLs; Otherwise stock - Soon to be spoiled
|
07-22-2015, 10:48 AM | #6 |
Drives: 2013 2SS/RS/1LE Join Date: Apr 2010
Location: St Louis, MO
Posts: 3,087
|
Likely just a loose connection in the harness.
I figured they would replace it. |
07-22-2015, 01:53 PM | #7 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
call us up will set you up with a new harness.
|
|
|
|
|