camaro ZL1 clear bra? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

khalsa013 · 05-30-2013, 01:29 AM

hey guys i was wondering where can i buy a oem 3m clear bra? one of my friends has it on his zl1 now i want one too

Thanks!

charlietuna · 05-30-2013, 08:24 AM

Not a Original Equipment Manufacturers option I would search for installers in your area. With clear bras like most aftermarket installed accessories, is all about the installer find the best installer you can and chat with him prior to purchase. By the way, I wish I had installed this prior to delivery now it's too late as I have a few chips on the front of my Z from a few spirited runs.

Good luck hope you find a good installer.

zkdreads · 05-30-2013, 08:28 AM

ask your friend. or search your local are for installers

2012 ZL1#1658 · 05-30-2013, 09:28 AM

Also, don't try to do this yourself. I thought about it but went with having a professional install.

zkdreads · 05-30-2013, 09:46 AM

Quote:

Originally Posted by 2012 ZL1#1658

Also, don't try to do this yourself. I thought about it but went with having a professional install.

definitly agree. the guy that did my clear bra took 4 hours. so i can imagine if a professional took that long. i would take days

bluBlud · 05-30-2013, 10:35 AM

My advice - if you're picky - look at an installation you think is good then use that installer. Also think about if you want a precut kit which will leave gaps or a custom installation where there is a chance your paint will get cut when the installer is trimming the film.

The front end of a Camaro is apparently very difficult to wrap, so looking at an installation on a car with fewer surfaces wont necessarily be an indication of how it'll look on your car.

Also, don't expect perfection. I paid $500 for what turned out to be a bad installation, then paid more to have a very reputable installer put a new one on and it's good but not perfect. I do have a few bubbles and trapped dirt.

Also think about what brand of film you want. I went with xpel ultimate for the self-healing ability and better warranty than 3M.

zkdreads · 05-30-2013, 01:22 PM

use a 3m precut installer. better if its already cut and the installer is just putting it on the areas it belongs. depending on the program they have it should be print out the pre-cut anyway

JimE · 05-30-2013, 08:23 PM

Check out Ziebart if you have an installer in your area. Similar cost, but seems to be more durable. And it can be peeled back/off and reapplied to correct smaller issues.

And I agree, regardless of the brand chosen, it's all about the installer.

AMCBimmer · 06-02-2013, 10:07 AM

3m is garbage use X-Pel. I have 3m on my M5 and it sits in the garage. Only gets 1000 miles a year. I have Xpel on my ZL1 and Audi Q5. It's a better product. If you want the best clear bra search for Suntek. I took some of the Xpel off the ZL1 and put Suntek on the hood and mirrors

http://www.camaro5.com/forums/showthread.php?t=299273

khalsa013 · 06-09-2013, 11:23 PM

thanks guys, im going to ask a few friends this week and get it over with lol

05-30-2013, 08:24 AM	#2
charlietuna Drives: 2013 ZL1 Join Date: Jul 2012 Location: Chicago, IL Posts: 1,342 View My Garage	Not a Original Equipment Manufacturers option I would search for installers in your area. With clear bras like most aftermarket installed accessories, is all about the installer find the best installer you can and chat with him prior to purchase. By the way, I wish I had installed this prior to delivery now it's too late as I have a few chips on the front of my Z from a few spirited runs. Good luck hope you find a good installer. __________________ Laus Deo

05-30-2013, 08:28 AM	#3
zkdreads Drives: 2010 Camaro LS V6 Join Date: Jul 2010 Location: Tampa, Florida Posts: 2,784	ask your friend. or search your local are for installers __________________ C-LO or Sonic "Without Struggle there is no progress" I am your best nightmare!

05-30-2013, 09:28 AM	#4
2012 ZL1#1658 Drives: 2012 Camaro ZL1 #1658 Join Date: Jul 2010 Location: Pennsauken, NJ Posts: 595	Also, don't try to do this yourself. I thought about it but went with having a professional install. __________________ 2012 ZL1 (BLACK on BLACK) Roto-Fab CAI RX Catch Can 3M Paint Protection 2011 1SS/RS (BLACK on BLACK) <SOLD>

05-30-2013, 10:35 AM	#6
bluBlud Drives: 2013 2SS/RS/1LE Join Date: Mar 2013 Location: CT Posts: 483	My advice - if you're picky - look at an installation you think is good then use that installer. Also think about if you want a precut kit which will leave gaps or a custom installation where there is a chance your paint will get cut when the installer is trimming the film. The front end of a Camaro is apparently very difficult to wrap, so looking at an installation on a car with fewer surfaces wont necessarily be an indication of how it'll look on your car. Also, don't expect perfection. I paid $500 for what turned out to be a bad installation, then paid more to have a very reputable installer put a new one on and it's good but not perfect. I do have a few bubbles and trapped dirt. Also think about what brand of film you want. I went with xpel ultimate for the self-healing ability and better warranty than 3M. __________________

05-30-2013, 01:22 PM	#7
zkdreads Drives: 2010 Camaro LS V6 Join Date: Jul 2010 Location: Tampa, Florida Posts: 2,784	use a 3m precut installer. better if its already cut and the installer is just putting it on the areas it belongs. depending on the program they have it should be print out the pre-cut anyway __________________ C-LO or Sonic "Without Struggle there is no progress" I am your best nightmare!

05-30-2013, 01:29 AM	#1
khalsa013 Drives: 2ss & ZL1 Join Date: Oct 2010 Location: wisconsin-Miwaukee Posts: 675	camaro ZL1 clear bra? hey guys i was wondering where can i buy a oem 3m clear bra? one of my friends has it on his zl1 now i want one too Thanks!

05-30-2013, 08:23 PM	#8
JimE Drives: 2013 2SS/RS/1LE Join Date: Apr 2010 Location: St Louis, MO Posts: 3,087	Check out Ziebart if you have an installer in your area. Similar cost, but seems to be more durable. And it can be peeled back/off and reapplied to correct smaller issues. And I agree, regardless of the brand chosen, it's all about the installer.

06-02-2013, 10:07 AM	#9
AMCBimmer Drives: 2002 BMW M5 Join Date: Jun 2011 Location: Aldie, VA Posts: 250	3m is garbage use X-Pel. I have 3m on my M5 and it sits in the garage. Only gets 1000 miles a year. I have Xpel on my ZL1 and Audi Q5. It's a better product. If you want the best clear bra search for Suntek. I took some of the Xpel off the ZL1 and put Suntek on the hood and mirrors http://www.camaro5.com/forums/showthread.php?t=299273 __________________

06-09-2013, 11:23 PM	#10
khalsa013 Drives: 2ss & ZL1 Join Date: Oct 2010 Location: wisconsin-Miwaukee Posts: 675	thanks guys, im going to ask a few friends this week and get it over with lol