DRL Harness Not Working (Pass-Side)? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ice-Forever · 07-19-2015, 06:50 PM

Sorry guys, I know you're sick of the DRL threads, lol, but I searched and searched and couldn't find anything...

Plugged it in, changed the bulbs, turned them on...super stoked to go cruising...drum roll...peek around front...Driver-side fog works fine - looks fantastic(!), pass-side nothing...

Tried switching bulbs around in all-sorts of different configurations, to no avail. I figure it must be either the harness, or the wiring, and since they work just fine when the harness is NOT in-line, that leaves one thing, right? Does anybody have a wiring diagram for the config of the DR1/DIYDR1 so I can double-check it...or have [a] different idea(s) as to what else might/could be the problem...?

Have to wait until the AM, as it is, and I really don't like driving around with 1 fog out, so figured I'd check and see.

Carmikaze · 07-19-2015, 07:30 PM

Make sure none of the pins get bent connect the harness. I had that problem and took a while to figure it out.

Ice-Forever · 07-19-2015, 08:35 PM

Quote:

Originally Posted by Carmikaze

Make sure none of the pins get bent connect the harness. I had that problem and took a while to figure it out.

Yeah, that was one of the first things I checked...Sorry that I didn't specify

JimE · 07-20-2015, 01:03 PM

Contact gen5diy

Ice-Forever · 07-22-2015, 10:40 AM

Quote:

Originally Posted by JimE

Contact gen5diy

I did, new harness on the way as we speak...Just wanted to post while I was waiting to hear from them in case it was something dumb that I messed up, haha.

JimE · 07-22-2015, 10:48 AM

Likely just a loose connection in the harness.

I figured they would replace it.

2SSRS@Gen5diy · 07-22-2015, 01:53 PM

call us up will set you up with a new harness.

07-19-2015, 06:50 PM	#1
Ice-Forever Drives: "Bette White" '11 2SS/RS LS3 Join Date: Jul 2014 Location: Grapevine Posts: 105 View My Garage	DRL Harness Not Working (Pass-Side)? Sorry guys, I know you're sick of the DRL threads, lol, but I searched and searched and couldn't find anything... Plugged it in, changed the bulbs, turned them on...super stoked to go cruising...drum roll...peek around front...Driver-side fog works fine - looks fantastic(!), pass-side nothing... Tried switching bulbs around in all-sorts of different configurations, to no avail. I figure it must be either the harness, or the wiring, and since they work just fine when the harness is NOT in-line, that leaves one thing, right? Does anybody have a wiring diagram for the config of the DR1/DIYDR1 so I can double-check it...or have [a] different idea(s) as to what else might/could be the problem...? Have to wait until the AM, as it is, and I really don't like driving around with 1 fog out, so figured I'd check and see. __________________ - Bette White - '11 2SS/RS LS3 /w Driver-Mod, Hurst Short Throw, Rx CC+1LE CSS, Hawk HPS Pads, Apex Motorsports SkipShift Elim, Gen5DIY DRL Harness+P13W/11W/4300K Fogs/DRLs; Otherwise stock - Soon to be spoiled

07-19-2015, 07:30 PM	#2
Carmikaze HTCC Membership Director Drives: 2013 RS Camaro Join Date: Jan 2014 Location: Cypress TX Posts: 277	Make sure none of the pins get bent connect the harness. I had that problem and took a while to figure it out.

07-20-2015, 01:03 PM	#4
JimE Drives: 2013 2SS/RS/1LE Join Date: Apr 2010 Location: St Louis, MO Posts: 3,087	Contact gen5diy

07-22-2015, 10:48 AM	#6
JimE Drives: 2013 2SS/RS/1LE Join Date: Apr 2010 Location: St Louis, MO Posts: 3,087	Likely just a loose connection in the harness. I figured they would replace it.

07-22-2015, 01:53 PM	#7
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	call us up will set you up with a new harness.