05-17-2018, 09:07 PM | #1 |
Drives: 2015 Camaro Z28 Join Date: Dec 2015
Location: michigan
Posts: 49
|
Brake pad sensors
Anyone have trouble with the sensors staying in the pad I changed front pads and cant get the new sensor to stay in on the drivers side thus giving me a "brakes worn" message on the DIC. Any sugestions?
|
05-18-2018, 08:28 AM | #2 |
Drives: 15 Z28, 01 Corvette, 96 Corvette Join Date: Dec 2016
Location: Colorado
Posts: 863
|
try the old sensor if its still good. I had one that was pretty loose in there. I go through them fast enough it wasn't a big deal. If you watch them really really close you can just cut the tip off and twist the wires together to bypass them. Ive done that during a track event to get an extra session out of the pads.
__________________
2018 Sierra RCSB | 2015 Z28 Camaro | 1989 B2200 with a 327 | 1996 LT4 Z51 Corvette | 1973 427 Nova
|
|
|
Thread Tools | |
|
|