08-29-2015, 08:43 PM | #1 |
Fog lights won't come on with harness installed
I posted this once and didn't get any responses. I put new bulbs in my DRL'S and fogs to match my Halo's. And when I put my harness in my fog lights won't come on at all unless I remove the harness. Any suggestions??? And yes I pushed the button in the middle of the light switch.
|
|
08-29-2015, 08:52 PM | #2 |
Drives: 2013 Summit White ZL1 Join Date: Jun 2014
Location: Peotone, IL
Posts: 106
|
Sounds like bad harness. Get the one from GEN5DIY
__________________
2013 Summit White ZL1
|
08-30-2015, 08:46 AM | #3 |
ZL1 Pilot
|
The harness you have is for an SS RS package. Not ZL1. That's why.
I went thru the same issue. That's exactly how it behaves when the incorrect harness is used
__________________
GP Tuning 2.5 Cam, RPS Carbon Twin Clutch, Ported Blower, Kook's Headers, Cold Air Inductions CAI, ID850's, 9.17 Lower, 2.5 Upper, JMS BAP, Pedders Front Radius Arm Inserts, Whiteline Subframe Inserts, Tuned by me with HP Tuners Idle Clip Link...........https://www.youtube.com/watch?v=gTL8S9eHwbs |
08-30-2015, 01:16 PM | #4 |
Thanks for the input.
|
|
|
|
|
|