Front Splitter

nicktechla · 06-19-2018, 03:01 PM

Is it replaceable? or part of the whole bumper cover? If its separate, does anyone know the part #? Does it come pre-painted?

303MattB · 06-19-2018, 07:24 PM

Not a whole lot of good info I can give, but ya it is fairly cheep and can be replaced without much specialized skills. At least that was what I could figure out when I was considering a 1LE. Now, I have a 1LE and I do not scrape it as much as I had feared. While you do have to watch it, it is not too bad IMO.

Homey Da Clown · 06-19-2018, 07:52 PM

Yes. It’s replaceable. Just under $200. This may be part# 84176917 may not be. Comes in a big box. Comes painted.

nicktechla · 06-19-2018, 08:26 PM

Quote:

Originally Posted by Homey Da Clown

Yes. It’s replaceable. Just under $200. This may be part# 84176917 may not be. Comes in a big box. Comes painted.

perfect, thanks! I was googling splitter, not spoiler. haha.

devnull · 06-19-2018, 09:19 PM

So what's left on that sucker to do Nick?

nicktechla · 06-19-2018, 09:20 PM

Quote:

Originally Posted by devnull

So what's left on that sucker to do Nick?

just picked it up earlier.. it's almost ready to party

splitter is fine. theres just a tiny scrape on the bottom. you can't see it. I'm just being anal.

devnull · 06-19-2018, 09:22 PM

Quote:

Originally Posted by nicktechla

just picked it up earlier.. it's almost ready to party

splitter is fine. theres just a tiny scrape on the bottom. you can't see it. I'm just being anal.

As we all would be brother. WOW NICE! I'm glad you're getting it back!!!

nicktechla · 07-13-2018, 01:04 AM

So who has replaced the front spoiler? how much of a pain is it to get off?

VAZL1 · 07-13-2018, 05:02 PM

Quote:

Originally Posted by nicktechla

So who has replaced the front spoiler? how much of a pain is it to get off?

If your just replacing the stock splitter you can replace it in a couple of hours. No need to remove the bumper just the panels underneath will give you access to the clips that hold the splitter in place.

Splitter removed

Splitter clips (white clip lower left)

nicktechla · 07-13-2018, 05:03 PM

Quote:

Originally Posted by VAZL1

If your just replacing the stock splitter you can replace it in a couple of hours. No need to remove the bumper just the panels underneath will give you access to the clips that hold the splitter in place.

Splitter removed

Splitter clips (white clip lower left)

thanks

nicktechla · 11-22-2018, 01:53 PM

I finally had some free time before Thanksgiving dinner and put on the spoiler today. Easy Peasy! I did some new air dams too while I was under there.

VAZL1 · 11-24-2018, 11:29 AM

Loken good!

Ron_Robinson1 · 11-24-2018, 03:06 PM

Nicktechla,Where did you order it from?

nicktechla · 11-24-2018, 07:51 PM

Quote:

Originally Posted by Ron_Robinson1

Nicktechla,Where did you order it from?

I got mine from yourgmpartssolution.com. I just looked for whatever vendor had the cheapest shipping, since some wanted 2x the cost of the part for shipping :o it comes in a massive box

06-19-2018, 03:01 PM	#1
nicktechla Drives: 2012 Porsche 911 Turbo S Join Date: Jan 2017 Location: Los Angeles, CA Posts: 1,776	Front Splitter Is it replaceable? or part of the whole bumper cover? If its separate, does anyone know the part #? Does it come pre-painted? __________________ IG: 2fast2nick -- Current -- 2012 Porsche Turbo S - PDK - Basalt Black Metallic -- Past -- 2017 Camaro ZL1 Coupe - Red Hot - A10, PDR - HRE P101 2015 Mustang GT PP - Whipple Supercharger

06-19-2018, 09:19 PM	#5
devnull Scientific negotiator Drives: 2019 Grand Sport Join Date: Mar 2017 Location: Forsyth, GA Posts: 873	So what's left on that sucker to do Nick? __________________ 2019 Grand Sport M7 2018 ZL1 *1LE* 6MT 2017 SS *1LE* 6MT . Matthew 25:40 *ΜΟΛΩΝ ΛΑβΕ*

07-13-2018, 01:04 AM	#8
nicktechla Drives: 2012 Porsche 911 Turbo S Join Date: Jan 2017 Location: Los Angeles, CA Posts: 1,776	So who has replaced the front spoiler? how much of a pain is it to get off? __________________ IG: 2fast2nick -- Current -- 2012 Porsche Turbo S - PDK - Basalt Black Metallic -- Past -- 2017 Camaro ZL1 Coupe - Red Hot - A10, PDR - HRE P101 2015 Mustang GT PP - Whipple Supercharger

11-22-2018, 01:53 PM	#11
nicktechla Drives: 2012 Porsche 911 Turbo S Join Date: Jan 2017 Location: Los Angeles, CA Posts: 1,776	I finally had some free time before Thanksgiving dinner and put on the spoiler today. Easy Peasy! I did some new air dams too while I was under there. Attached Images __________________ IG: 2fast2nick -- Current -- 2012 Porsche Turbo S - PDK - Basalt Black Metallic -- Past -- 2017 Camaro ZL1 Coupe - Red Hot - A10, PDR - HRE P101 2015 Mustang GT PP - Whipple Supercharger

11-24-2018, 11:29 AM	#12
VAZL1 Drives: 17 ZL1 Join Date: Mar 2017 Location: VA Posts: 1,075	Loken good! __________________ 2017 ZL1 Coupe M6, Red Hot Mods; AFE Pro 5R CAI, Kong Ported Blower and Snout, NW 103 TB, Griptech 2.31 Upper, Kooks 2",JMS Voltage Booster, Flex Fuel, Mighty Mouse CC,Jannetty Racing Tune, 680 rwhp

06-19-2018, 07:24 PM	#2
303MattB Drives: ZL1 1LE Join Date: Jun 2018 Location: Denver Posts: 18	Not a whole lot of good info I can give, but ya it is fairly cheep and can be replaced without much specialized skills. At least that was what I could figure out when I was considering a 1LE. Now, I have a 1LE and I do not scrape it as much as I had feared. While you do have to watch it, it is not too bad IMO.

06-19-2018, 07:52 PM	#3
Homey Da Clown Drives: 2017 ZL1 A10 Vert Join Date: Jan 2018 Location: Texas Posts: 56	Yes. It’s replaceable. Just under $200. This may be part# 84176917 may not be. Comes in a big box. Comes painted.

11-24-2018, 03:06 PM	#13
Ron_Robinson1 Drives: A Static line to a pack tray & ZL1 Join Date: Feb 2011 Location: Centeral NY Posts: 2,276	Nicktechla,Where did you order it from? __________________ 2017 ZL1 A10: 8.84 @ 156 PB 2017 ZL1 A10: Previously FBO 756/761 (9.6 @ 143 1/4) SOLD-2013 ZL1 M6:BTR,LTs,IDs,ATI,RotoFab10.84@129 SOLD-2011 SS M6: Blower, Cam, Alky, LTs.

User Name		Remember Me?
Password