2011 2ss/RS build thread. Agp turbos - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Hcd3ss · 01-06-2014, 07:47 PM

My first mod was a sequential rear turn signal harness. After that a k&n air filter (which is about to come off) and from here on I'll try to list and photograph other upgrades. I felt like today was a good time to start this thread as I have just recieved 5 boxes from agp, which I could only assume is my turbo kit. I'll post pics soon.
In the meantime, I would like the ambient light that is on my door panels to go all the way across the dash, my drls to be fog lights ( and match the hids) and I need advice the first suspension parts to change, I eventually want to do most of the recommended suspension stuff, but for now would like to do at least something. And advice would be great.

Sent from my iPhone using Tapatalk

blake-b · 01-06-2014, 07:49 PM

Which size turbos did you go with?

For the dash ABL, there is a DIY thread on that
For the DRL to be fog lights, there is also a DIY for that (I think you need a wiring harness too)
For suspension:
Trailing arms
subframe bushings
Toe rods

That will get you started.

SGDM · 01-06-2014, 09:04 PM

Congrats, yer gonna love it. Trailing arms with spherical bearings fer sure.

Hcd3ss · 01-29-2014, 06:56 PM

Blake-b, I went with the base turbo kit.. I believe it's twin 51mm turbos.. And SGDM thanks for the advice. I'm gonna check into all those suspension parts. I'm loading her up on the trailer in the morning and I'm planning on being in Bradenton Friday sometime to drop the car off with matt@FSP. He will be doing the install and tuning. I couldn't believe the price he gave me. I have not actually met Matt or any of his guys, but based on our conversations I think I couldn't have made a better choice.

01-06-2014, 07:47 PM	#1
Hcd3ss Drives: 2011 camaro 2ss/RS Join Date: Nov 2013 Location: Waycross, Ga Posts: 80	2011 2ss/RS build thread. Agp turbos My first mod was a sequential rear turn signal harness. After that a k&n air filter (which is about to come off) and from here on I'll try to list and photograph other upgrades. I felt like today was a good time to start this thread as I have just recieved 5 boxes from agp, which I could only assume is my turbo kit. I'll post pics soon. In the meantime, I would like the ambient light that is on my door panels to go all the way across the dash, my drls to be fog lights ( and match the hids) and I need advice the first suspension parts to change, I eventually want to do most of the recommended suspension stuff, but for now would like to do at least something. And advice would be great. Sent from my iPhone using Tapatalk

01-06-2014, 09:04 PM	#3
SGDM Drives: 2016 2SS Join Date: Nov 2011 Location: North Texas Posts: 1,422	Congrats, yer gonna love it. Trailing arms with spherical bearings fer sure. __________________ Who Dares...Wins

01-06-2014, 07:49 PM	#2
blake-b Drives: 2009 ZR1 Join Date: May 2010 Location: KCMO Posts: 3,205	Which size turbos did you go with? For the dash ABL, there is a DIY thread on that For the DRL to be fog lights, there is also a DIY for that (I think you need a wiring harness too) For suspension: Trailing arms subframe bushings Toe rods That will get you started.

01-29-2014, 06:56 PM	#4
Hcd3ss Drives: 2011 camaro 2ss/RS Join Date: Nov 2013 Location: Waycross, Ga Posts: 80	Blake-b, I went with the base turbo kit.. I believe it's twin 51mm turbos.. And SGDM thanks for the advice. I'm gonna check into all those suspension parts. I'm loading her up on the trailer in the morning and I'm planning on being in Bradenton Friday sometime to drop the car off with matt@FSP. He will be doing the install and tuning. I couldn't believe the price he gave me. I have not actually met Matt or any of his guys, but based on our conversations I think I couldn't have made a better choice.