Street/Drag wheel size - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

DarmorGamz · 11-09-2020, 03:55 AM

Name: 6666C8EF-2879-4DD7-A0B3-E6BC80F50716.jpg
Views: 409
Size: 119.7 KB

Hey everyone, I’m new to the forums here.
I guess I’ll just put what I have on the car so far.
Air intake
Bbk longtubes + high flow cats
4.11 gears
Bmr rear suspension to prevent wheel hop
Tuned for 94 @432whp
20” rims on pirelli’s

I’d like to get a nice set of Mickeys or Hoosiers that I can drive around on the street and not have to change off at the strip.
I’ve seen a few forums saying the 18” c6 z06 +40 offset will clear the brakes.
Any suggestions or information on what everyone else runs. I know running 4.11s I’d like to get a lot more on my 60’ as I’m only hitting about 2seconds flat on it. I’m passing the 1/4 at 12.8 @116MPH.
Also just a side question about linelocks. I was just going to buy the hurst package, any negative experiences with it.

DarmorGamz · 11-09-2020, 07:29 AM

I've clearly posted this in the wrong subsection, can someone guide me on deleting this thread! Thank you kindly.

1JEWLDSSRS · 11-09-2020, 01:52 PM

I think if you look in the lower right hand corner of your post you will see an "edit" button, click on it and scroll down and you should see a "delete" button", click it then look below it and you will see a box that says "delete this thread", click it and save. At least I think that is how I did it before. Good luck

11-09-2020, 03:55 AM	#1
DarmorGamz Drives: Chevrolet Camaro SS Join Date: Oct 2020 Location: Ontario Posts: 3	Street/Drag wheel size Hey everyone, I’m new to the forums here. I guess I’ll just put what I have on the car so far. Air intake Bbk longtubes + high flow cats 4.11 gears Bmr rear suspension to prevent wheel hop Tuned for 94 @432whp 20” rims on pirelli’s I’d like to get a nice set of Mickeys or Hoosiers that I can drive around on the street and not have to change off at the strip. I’ve seen a few forums saying the 18” c6 z06 +40 offset will clear the brakes. Any suggestions or information on what everyone else runs. I know running 4.11s I’d like to get a lot more on my 60’ as I’m only hitting about 2seconds flat on it. I’m passing the 1/4 at 12.8 @116MPH. Also just a side question about linelocks. I was just going to buy the hurst package, any negative experiences with it.

11-09-2020, 01:52 PM	#3
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,394	I think if you look in the lower right hand corner of your post you will see an "edit" button, click on it and scroll down and you should see a "delete" button", click it then look below it and you will see a box that says "delete this thread", click it and save. At least I think that is how I did it before. Good luck __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

11-09-2020, 07:29 AM	#2
DarmorGamz Drives: Chevrolet Camaro SS Join Date: Oct 2020 Location: Ontario Posts: 3	I've clearly posted this in the wrong subsection, can someone guide me on deleting this thread! Thank you kindly.