12-19-2018, 06:35 PM | #1 |
Drives: 2014 ss 1Le Join Date: Apr 2018
Location: Florida
Posts: 7
|
Drag build
Okay I’m getting ready to tear it down. Doing a cai long tub headers with cat delete, tsp intake and 150 shot nitrous set up. Doing the zl1diff swap and upgrading suspension. Two questions not sure how fast will go. Do they make a bolt in roll cage? Also wanted to switch to dr what size can I use? Forgot doing cam oil pump timing chain and it’s being dyno tuned.
|
12-19-2018, 07:30 PM | #2 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
Best DRs are MT ET Street R 315/50x17.
|
12-19-2018, 07:52 PM | #3 |
@LS.ACE
Drives: 2014 Chevy Camaro 2SS/1LE Join Date: Jan 2017
Location: North Jersey
Posts: 296
|
You can run to 10.0 without a rollbar now as long as you still have all the factory safety equipment in tact (airbags and all of that). Just need a jacket and a helmet. NHRA finally passed the rule.
__________________
Some weird snail with a belt on it | Tial Q Bov | CCP Jam Cam | Stainless Works 1 7/8" Headers to Custom 3" Exhaust | Alky Control Dual Nozzle| ProMeth Trunk Mount Tank | Melling Oil Pump | DSX Aux Pump | id1050x Injectors | McLeod RXT w/ Monster Billet Release Bearing | ZL1 3.73 Rear Diff | BMR Delrin/Poly Diff Bushings | DSS 1-Piece Aluminum Driveshaft | ZL1 Axles | Metco Driveshaft Loop | BMR Adjustable LCA's, TA's, Toe Rods | BMR Adjustable Sway Bar w/ Fe3 End Links | Mickey Thompson 305/35-20 Street S/S Drag Radials |
|
12-21-2018, 11:07 AM | #4 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
I'm curious if the new rule means ALL factory safety equipment. I remove my passenger seat and that disables the passenger side airbags. I also pull a couple fuses to disable stablitrac and abs due to tire size difference between front and rear.
|
12-21-2018, 01:33 PM | #5 | |
@LS.ACE
Drives: 2014 Chevy Camaro 2SS/1LE Join Date: Jan 2017
Location: North Jersey
Posts: 296
|
Quote:
I also had to pull fuses to disable stablitrac and abs, but I always do that after I get tech'd in anyway.
__________________
Some weird snail with a belt on it | Tial Q Bov | CCP Jam Cam | Stainless Works 1 7/8" Headers to Custom 3" Exhaust | Alky Control Dual Nozzle| ProMeth Trunk Mount Tank | Melling Oil Pump | DSX Aux Pump | id1050x Injectors | McLeod RXT w/ Monster Billet Release Bearing | ZL1 3.73 Rear Diff | BMR Delrin/Poly Diff Bushings | DSS 1-Piece Aluminum Driveshaft | ZL1 Axles | Metco Driveshaft Loop | BMR Adjustable LCA's, TA's, Toe Rods | BMR Adjustable Sway Bar w/ Fe3 End Links | Mickey Thompson 305/35-20 Street S/S Drag Radials |
|
|
12-21-2018, 01:54 PM | #6 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
Good tip on pulling the fuses after tech. I could pull the seat after tech too.
|
12-24-2018, 09:24 AM | #7 |
@LS.ACE
Drives: 2014 Chevy Camaro 2SS/1LE Join Date: Jan 2017
Location: North Jersey
Posts: 296
|
Yea I wasn't sure if they would give me a problem so I just figured to skip all of the BS I would just do it after.
__________________
Some weird snail with a belt on it | Tial Q Bov | CCP Jam Cam | Stainless Works 1 7/8" Headers to Custom 3" Exhaust | Alky Control Dual Nozzle| ProMeth Trunk Mount Tank | Melling Oil Pump | DSX Aux Pump | id1050x Injectors | McLeod RXT w/ Monster Billet Release Bearing | ZL1 3.73 Rear Diff | BMR Delrin/Poly Diff Bushings | DSS 1-Piece Aluminum Driveshaft | ZL1 Axles | Metco Driveshaft Loop | BMR Adjustable LCA's, TA's, Toe Rods | BMR Adjustable Sway Bar w/ Fe3 End Links | Mickey Thompson 305/35-20 Street S/S Drag Radials |
|
12-25-2018, 05:50 AM | #8 | |
Drives: 2018 HOT WHEELS SS 6 SPEED COUPE Join Date: Jun 2018
Location: GROSSE TETE, LA.(SOUTH LA.)
Posts: 76
|
Quote:
HAVE YOU RUN THE 305/35r20 M/T’S YET ?, I JUST ORDERED A SET FOR MY BONE STOCK ZL1 THAT INTEND TO RUN IN OUR STREET BRACKET.
__________________
2017 QUICK 16 TRACK CHAMPION
STATE CAPITOL RACEWAY RACE TRACK CHAPLAIN FOR 30+ YRS |
|
12-25-2018, 07:56 AM | #9 | |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
Quote:
If you are running 20s, you aren't quick enough to worry about tech issues. |
|
12-25-2018, 09:19 AM | #10 | |
@LS.ACE
Drives: 2014 Chevy Camaro 2SS/1LE Join Date: Jan 2017
Location: North Jersey
Posts: 296
|
Quote:
As far as the 305/35r20 M/T'S: Yes, I ran them. For a bone stock ZL1 especially they will be perfect. I was actually using a loaner set my friend gave me for the end of the season last year when I finally got my car back. They definitely did the trick if the track prep was on point, but definitely wasn't enough for what I was putting down last season either. For this upcoming season I have a 17x10" weld s71 that I am going to be pairing w/ some ET Street R's on them. Definitely going to need a lot more bite especially with these "minor" winter upgrades I am doing.
__________________
Some weird snail with a belt on it | Tial Q Bov | CCP Jam Cam | Stainless Works 1 7/8" Headers to Custom 3" Exhaust | Alky Control Dual Nozzle| ProMeth Trunk Mount Tank | Melling Oil Pump | DSX Aux Pump | id1050x Injectors | McLeod RXT w/ Monster Billet Release Bearing | ZL1 3.73 Rear Diff | BMR Delrin/Poly Diff Bushings | DSS 1-Piece Aluminum Driveshaft | ZL1 Axles | Metco Driveshaft Loop | BMR Adjustable LCA's, TA's, Toe Rods | BMR Adjustable Sway Bar w/ Fe3 End Links | Mickey Thompson 305/35-20 Street S/S Drag Radials |
|
|
12-25-2018, 06:46 PM | #11 |
Drives: 2018 HOT WHEELS SS 6 SPEED COUPE Join Date: Jun 2018
Location: GROSSE TETE, LA.(SOUTH LA.)
Posts: 76
|
I THINK YOU MAY HAVE MISUNDERSTOOD MY STATEMENT, I AM NOT WORRIED ABOUT TECH ISSUES. PULLING SEATS OUT FOR RACING WAS THE QUESTION ABOUT TECH.
__________________
2017 QUICK 16 TRACK CHAMPION
STATE CAPITOL RACEWAY RACE TRACK CHAPLAIN FOR 30+ YRS |
12-25-2018, 07:22 PM | #12 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
If you have a bone stock ZL1 and are running 20s, you don't have worry about tech inspections regardless of what seats are in the car or even going fast for that matter.
|
12-25-2018, 08:20 PM | #13 |
Drives: 2018 HOT WHEELS SS 6 SPEED COUPE Join Date: Jun 2018
Location: GROSSE TETE, LA.(SOUTH LA.)
Posts: 76
|
THAT IS WHAT I SAID, I AM NOT WORRIED ABOUT TECH NOR AM I PULLING SEATS OUT EITHER, YOU GUYS WERE TALKING ABOUT TECHING IN WITH SEATS REMOVED. MY STATEMENT WAS RELATIVE TO HOW THE DIFFERENT CARS, OLD AND NEW ARE TECH INSPECTED AT MY HOME TRACK.
__________________
2017 QUICK 16 TRACK CHAMPION
STATE CAPITOL RACEWAY RACE TRACK CHAPLAIN FOR 30+ YRS |
12-25-2018, 08:24 PM | #14 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
|
|
|
Thread Tools | |
|
|