You are browsing camaro5 
 |
|
07-18-2013, 09:14 AM
|
#1 |
|
502 RWHP N/A
|
Northstar dragway
Alright I'm needing to do some test hits at the track my Mickey thompsons come in tomorrow and my stall should be put in my car next week seeing if anyone wants to go either the 27th of July hoping my stall is done before then or August 2. The 27th is a Saturday gates open at 6pm and August 2nd is a Friday gates open at 6
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
|
|
|
07-18-2013, 11:54 AM
|
#2 |
  
|
I am sure I will be up for one of those dates.
|
|
|
|
|
07-18-2013, 12:21 PM
|
#3 |
    Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
Hmm...I might be down to pop the cherry on the ZL1. We'll see.
|
|
|
|
|
07-18-2013, 01:18 PM
|
#4 |
|
|
I think August 27 is better. It is a Saturday and maybe, just maybe a bit cooler.
|
|
|
|
|
07-18-2013, 02:32 PM
|
#5 |
|
502 RWHP N/A
|
When u get that new toy
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
|
|
|
|
07-19-2013, 11:45 AM
|
#6 |
|
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
Last week. After a few emails back and forth with Andy I decided this was a better foundation to start with for my goals.
So far me very likey!  What converter are you putting in? |
|
|
|
|
07-19-2013, 12:52 PM
|
#7 |
|
502 RWHP N/A
|
Yank 2800 ss due to the fact my car will get blown
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
|
|
|
|
07-19-2013, 12:55 PM
|
#8 |
|
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
You'll be leaving quite a bit on the table until you put the blower on the car.
|
|
|
|
|
07-19-2013, 12:58 PM
|
#9 |
|
502 RWHP N/A
|
I just dont want to have the tranny dropped multiple times and keep paying lol. Gonna either go whipple 2.9 or lsa blower
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
|
|
|
|
07-19-2013, 01:00 PM
|
#10 |
|
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
AGP twins! Andy quoted me an awesome number for them!
|
|
|
|
|
07-19-2013, 01:03 PM
|
#11 |
    
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
Sounds good, might have to check it out but I won't be racing in this heat.
That LSA blower is the way to go my buddy did his with all new parts for 4500.00 
__________________
|
|
|
|
|
07-19-2013, 01:09 PM
|
#12 |
|
502 RWHP N/A
|
Nice
__________________
factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's
|
|
|
|
 |
|
|
