Corpus Christi Meets and Greets - Page 70 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

usnatclee · 04-14-2013, 04:15 PM

Yeah $200 for all four. They quoted me $600 because they would have to fix the curb rash. Granted this was without seeing them in person only in pictures so would probably be a bit cheaper.

Jerry7297 · 04-14-2013, 04:30 PM

Quote:

Originally Posted by Lady 88

Ray did it he took 1st in his class. Thanks to Pedders

Attachment 497385

Man that is awesome Ray, I want to ride with you on the next AutoX. Well done sir

mp51998 · 04-14-2013, 04:46 PM

Quote:

Originally Posted by usnatclee

Yeah $200 for all four. They quoted me $600 because they would have to fix the curb rash. Granted this was without seeing them in person only in pictures so would probably be a bit cheaper.

Is that the place off of Ayers? They charged Christine 100 bucks to fix one wheel after I removed the tire and didn't even balance it. They take them to my guy. He does all the curb rash repairs and PC in the Corpus area. If you go to him we can cut out the middle man. Just an FYI. Actually I think I have you his number before.

usnatclee · 04-14-2013, 05:02 PM

Yeah. Probably. I don't want them I'm just trying to sell them since we don't have Steph's Camaro anymore.

mp51998 · 04-14-2013, 06:05 PM

Well,,,,, if you get to the point you going to throw them away I'll take them off your hands.

Tara Martin · 04-14-2013, 06:49 PM

Quote:

Originally Posted by usnatclee

Yeah. Probably. I don't want them I'm just trying to sell them since we don't have Steph's Camaro anymore.

I'm interested in at least one wheel from everyone's spares. Doesn't matter about curb rash, either. I need a spare 20" rim that will work on the front or rear to use as a spare when I'm travelling. A front wheel will work on the rear, but a rear won't work on the front, right?

Please let me know if after trades and sales if a 20" front rim is left over that I can buy. If a whole set is available, I'll buy em, too.

Thanks,

Tara

Nutro · 04-14-2013, 07:05 PM

Quote:

Originally Posted by Tara Martin

Dang, I guess I missed everyone except for Robbie since I got there about 10:00pm. I parked next to his ZL1 and watched the Mustang circus. We got visited once by the CCPD, but not sure what happened. They went over by Walgreens and I couldn't see what they were there for.

There was quite a large group of folks out there until midnight or so.

See you-all later,

Tara

Oh, BTW, my RotoFab came without instructions, so I'm relying on photos from their site for reference. Is Witchdoctor92 the only one here with a RotoFab? I'd love to be able to look under the hood before I take mine apart. It's a used, but in very good shape, cold air unit and I want to insure that all the parts are there. Mike S. said I'll have to cut somewhere to use the included scoop, so I'll probably need some reference info there.

Thanks!

Yeah I COMPLETELY forgot to tell you I tossed the instructions for it. I assure you though, all the parts are there to install her.

Let me see if I can find the link on where to cut for the scoop.

Daniel

Nutro · 04-14-2013, 07:06 PM

Quote:

Originally Posted by Tara Martin

Dang, I guess I missed everyone except for Robbie since I got there about 10:00pm. I parked next to his ZL1 and watched the Mustang circus. We got visited once by the CCPD, but not sure what happened. They went over by Walgreens and I couldn't see what they were there for.

There was quite a large group of folks out there until midnight or so.

See you-all later,

Tara

Oh, BTW, my RotoFab came without instructions, so I'm relying on photos from their site for reference. Is Witchdoctor92 the only one here with a RotoFab? I'd love to be able to look under the hood before I take mine apart. It's a used, but in very good shape, cold air unit and I want to insure that all the parts are there. Mike S. said I'll have to cut somewhere to use the included scoop, so I'll probably need some reference info there.

Thanks!

BAM

http://www.camaro5.com/forums/showthread.php?t=185233

Jerry7297 · 04-14-2013, 07:33 PM

Quote:

Originally Posted by Nutro

BAM

http://www.camaro5.com/forums/showthread.php?t=185233

I have the ADM scoop on my car. The install isnt that bad if it is confusing I may be able to help.

Tara Martin · 04-14-2013, 07:48 PM

Quote:

Originally Posted by Nutro

BAM

http://www.camaro5.com/forums/showthread.php?t=185233

Thanks, Dan!

Tara

Tara Martin · 04-14-2013, 07:49 PM

Quote:

Originally Posted by Jerry7297

I have the ADM scoop on my car. The install isnt that bad if it is confusing I may be able to help.

Jerry,

Thanks; I may take you up on the offer of help!

Tara

nrr8865 · 04-15-2013, 12:27 AM

My runs at the Texas Camaro Revolution are downloaded on Neomi's YouTube page. Enjoy, especially the 47.1. Too bad it wasn't enough.

usnatclee · 04-15-2013, 11:45 AM

Looks like some great runs! Way to represent Corpus Christi!

Hennesseyrgv · 04-15-2013, 09:48 PM

Guys I was talking to Ray this weekend at Texas Camaro Revolution , here's the dates for the next High Speed course in Bayview Texas, near Los fresnos (May 4) and (June 15)....
Let me know if you all decide to come down here, maybe I can set up a hang out before or after the race with CAMARO5LINE.

04-14-2013, 04:15 PM	#967
usnatclee Drives: '12 2SS/RS, '13 Vette, '13 Wrangler Join Date: May 2012 Location: wherever the Navy sends me Posts: 740	Yeah $200 for all four. They quoted me $600 because they would have to fix the curb rash. Granted this was without seeing them in person only in pictures so would probably be a bit cheaper. __________________ 2012 Camaro Ashen Grey Metallic 2SS/RS "Timberwolf". Custom exhaust, RX oil catch can and oil breather, CAI inc intake, SLP 160* thermostat, TSP 2" LT headers w/ off road pipes, custom cam, tuned. 467rwhp 450rwtq. 2013 Corvette Torch Red LS3. 378rwhp/375rwtq SAE corrected, tuned. ROCK CHALK JAYHAWK GO KU!

04-14-2013, 05:02 PM	#970
usnatclee Drives: '12 2SS/RS, '13 Vette, '13 Wrangler Join Date: May 2012 Location: wherever the Navy sends me Posts: 740	Yeah. Probably. I don't want them I'm just trying to sell them since we don't have Steph's Camaro anymore. __________________ 2012 Camaro Ashen Grey Metallic 2SS/RS "Timberwolf". Custom exhaust, RX oil catch can and oil breather, CAI inc intake, SLP 160* thermostat, TSP 2" LT headers w/ off road pipes, custom cam, tuned. 467rwhp 450rwtq. 2013 Corvette Torch Red LS3. 378rwhp/375rwtq SAE corrected, tuned. ROCK CHALK JAYHAWK GO KU!

04-15-2013, 11:45 AM	#979
usnatclee Drives: '12 2SS/RS, '13 Vette, '13 Wrangler Join Date: May 2012 Location: wherever the Navy sends me Posts: 740	Looks like some great runs! Way to represent Corpus Christi! __________________ 2012 Camaro Ashen Grey Metallic 2SS/RS "Timberwolf". Custom exhaust, RX oil catch can and oil breather, CAI inc intake, SLP 160* thermostat, TSP 2" LT headers w/ off road pipes, custom cam, tuned. 467rwhp 450rwtq. 2013 Corvette Torch Red LS3. 378rwhp/375rwtq SAE corrected, tuned. ROCK CHALK JAYHAWK GO KU!

04-15-2013, 09:48 PM	#980
Hennesseyrgv CAMARO5LINE FOUNDER Drives: Hennessey HPE650 Join Date: Oct 2010 Location: LOS FRESNOS TX Posts: 955 View My Garage	Guys I was talking to Ray this weekend at Texas Camaro Revolution , here's the dates for the next High Speed course in Bayview Texas, near Los fresnos (May 4) and (June 15).... Let me know if you all decide to come down here, maybe I can set up a hang out before or after the race with CAMARO5LINE. __________________ X-CAMARO5LINE PRESIDENT CAMARO5LINE FOUNDER

04-14-2013, 06:05 PM	#971
mp51998 Drives: Black 2011 2SS/RS Join Date: May 2011 Location: S. Texas Posts: 1,817	Well,,,,, if you get to the point you going to throw them away I'll take them off your hands.

04-15-2013, 12:27 AM	#978
nrr8865 Drives: '10 RJT-2LT/RS & '10 Buick LaCrosse Join Date: Jul 2009 Location: Corpus Christi, TX Posts: 290	My runs at the Texas Camaro Revolution are downloaded on Neomi's YouTube page. Enjoy, especially the 47.1. Too bad it wasn't enough.