Interior Vent trim removal - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Michael_Js · 02-17-2010, 11:06 PM

Can you point me to where those bolts are?

Thanks

strauchpete · 02-17-2010, 11:35 PM

you need to remove the radio, gauges, and glove box

there are 2 one each below the controls for the air vent and 2 above it
there is one that is in the middle between the vents below, there are two that you can see the back of them behind the colored trim piece

if you can get all them out you push the vents back into the dash and you can pop the clips that hold the colored panel that is connected to the vents off and twist the colored plastic through the air vent.
Then you will have 2 separate vents left and you pull them down where the radio is at.

tomorrow I will take pics of the screws and try and get them posted.

02-17-2010, 11:06 PM	#15
Michael_Js SoCal C5 Family Member Drives: 2010 Camaro SS/RS - Black w/IOM; 6M Join Date: Jul 2009 Location: San Diego, CA, USA Posts: 5,299 View My Garage	Can you point me to where those bolts are? Thanks __________________ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~ 2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; ********; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers;

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs!	RPI Designs	Cosmetics and Lighting Modification Discussions	36	04-02-2020 05:32 PM
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs!	RPI Designs	Exterior Parts & Accessories	30	02-20-2013 03:23 PM
Can someone explain this interior trim kit / ambient lighting ?	cbrniner	Cosmetics and Lighting Modification Discussions	19	01-30-2010 10:56 AM
VIDEO: Removal of Tailight Bezels / Trim	Capstone	Camaro DIY & HOW-TO instructions & discussions	14	10-13-2009 11:43 AM

02-17-2010, 11:35 PM	#16
strauchpete Account Suspended Drives: 2010 Camaro 1LT Join Date: Dec 2009 Location: Sedalia, Missouri Posts: 338 View My Garage	you need to remove the radio, gauges, and glove box there are 2 one each below the controls for the air vent and 2 above it there is one that is in the middle between the vents below, there are two that you can see the back of them behind the colored trim piece if you can get all them out you push the vents back into the dash and you can pop the clips that hold the colored panel that is connected to the vents off and twist the colored plastic through the air vent. Then you will have 2 separate vents left and you pull them down where the radio is at. tomorrow I will take pics of the screws and try and get them posted.