NEC5 Spring 2018 Modifications! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

TRC-SS · 02-26-2018, 06:10 PM

Its close enough! Weather is getting nicer. Lets hear those plans for this spring!!

I have the following going on in about a month

1-New wheels. Gunmetal MRR M017
2-Anvil Spoiler
3-Anvil Wickerbill
4-Black tail light bezels
5-Black Power coated Exhaust Ports
6- Not planned yet but I'm guessing i need a New Driveshaft due to a vibration.

chevyracingfan · 02-26-2018, 06:43 PM

1=apr splitter
2=zl1 rockers
3=rear spoiler
4=trans cooler
5=3 inch cowl hood(fiberglass)
6=paint calipers and rotor hats
7=if any cash left paint stripes instead of vinyl

600hp-lpe · 02-28-2018, 11:13 AM

upgraded to ZL1 calipers and rotors
ARH headers (ceramic coated)
3" stainless exhaust
Quad tipped ARH mufflers
1LE rear diffuser for exhaust
granetelli plug wires

Elite1LE · 03-01-2018, 06:31 AM

Planning to install by the end of March.

GPI SS3 cam/package
GPI rod mod and ported intake
New Era Performance ported throttle body
Powerbond 25% UDP
160deg Thermostat

Slowhawk · 03-01-2018, 04:22 PM

I don't have plans, just drive my 1979 TA turd. Spend to much time building the 5th gen's.

Kopterman · 03-01-2018, 05:23 PM

Done with my mods until my clutch gives out or I break something!

TRC-SS · 03-01-2018, 06:21 PM

Quote:

Originally Posted by Kopterman

Done with my mods until my clutch gives out or I break something!

Haha

Bottledbird68 · 03-02-2018, 08:39 AM

Finally install the cam I bought last year, nitrous kit I just bought, and try to find a deal I’m happy with on a bigger rear end lol. That and maybe a drag wheel/tire setup as well. And have some fun with it ��

Evil-Bee-NH · 03-03-2018, 12:10 AM

Diode Dynamics LED Sidemarkers
OPT7 LED Headlight Bulbs
Transmission Tune and ECM Retune.

I plan to make a lot more dragstrip visits this year maybe 1 or 2 autox events. I'll be content with breaking into the 12s on the 1/4 mile.

paul3078 · 03-05-2018, 07:41 PM

ZL-1 Rear differential kit (differential, axles driveshaft, etc), Spohn lower control arms, rear trailing arms, rear toe links, all with poly bushings, poly upper control arm bushings.Pegasus solid rear subframe mounts. Racestar recluse 17x4.5 fronts, 17x10.5 rears, tires still TBD. Hawk HPS 5.0 pads F & R, Z-28 brake duct cooling kit (may not work because of supercharger intercooler pump but haven't pulled off nose for test fit yet. WHEW! I think that's it! Oh yeah and fix dumb move on my part not putting sealer on flywheel bolts causing minor oil leak. (DONE as of yesterday)

Evil-Bee-NH · 03-06-2018, 10:53 AM

Lol, damn paul when you gonna break out of the 12s..

paul3078 · 03-06-2018, 04:55 PM

Quote:

Originally Posted by Evil-Bee-NH

Lol, damn paul when you gonna break out of the 12s..

Better be in the 10's!!!

Evil-Bee-NH · 03-06-2018, 08:24 PM

Quote:

Originally Posted by paul3078

Better be in the 10's!!!

Looking forward to seeing that I have plans to about 100% be at NED on April 7th and a ton in May for street nights and maybe test and tune. I might go to IFO april 20th as well if your interested.

BTRSS · 03-10-2018, 04:38 PM

Getting ready for the Boston World of Wheels later this month, so in addition to all the "stuff" I did over the winter I just all my all my chrome goodies back:

- Factory Strut Bar and all the mounting hardware -- This is really a piece of art for us "old" guys that love chrome!
- Door Catches -- Installed today, looks awesome!
- MGW Shift Post -- Although I'm probably not going to install it.
- Misc nuts and bolts -- Now I just have to remember where they go, LOL!
- 3GCustomz Door and trunk props painted to match the interior theme by Lupe

Bass Pro 1 month away!!

02-26-2018, 06:10 PM	#1
TRC-SS 700RWHP-650TQ Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010 Location: Shrewsbury Massachusetts Posts: 5,269 View My Garage	NEC5 Spring 2018 Modifications! Its close enough! Weather is getting nicer. Lets hear those plans for this spring!! I have the following going on in about a month 1-New wheels. Gunmetal MRR M017 2-Anvil Spoiler 3-Anvil Wickerbill 4-Black tail light bezels 5-Black Power coated Exhaust Ports 6- Not planned yet but I'm guessing i need a New Driveshaft due to a vibration. __________________ View Build HERE>>>>>MY 2011 2SS/RS JOURNAL

03-03-2018, 12:10 AM	#9
Evil-Bee-NH 603 Camaros Drives: 2017 NGM I4 1LT Coupe Join Date: May 2012 Location: Manchester, NH Posts: 6,779 View My Garage	Diode Dynamics LED Sidemarkers OPT7 LED Headlight Bulbs Transmission Tune and ECM Retune. I plan to make a lot more dragstrip visits this year maybe 1 or 2 autox events. I'll be content with breaking into the 12s on the 1/4 mile. __________________ MY 2017 I4 CAMARO BUILD JOURNAL \| YOUTUBE \| INSTAGRAM \| 316RWHP - 385 RWTQ HPTUNERS DYNO TUNE \| 12.693s @ 105MPH 1/4 Mile

03-06-2018, 10:53 AM	#11
Evil-Bee-NH 603 Camaros Drives: 2017 NGM I4 1LT Coupe Join Date: May 2012 Location: Manchester, NH Posts: 6,779 View My Garage	Lol, damn paul when you gonna break out of the 12s.. __________________ MY 2017 I4 CAMARO BUILD JOURNAL \| YOUTUBE \| INSTAGRAM \| 316RWHP - 385 RWTQ HPTUNERS DYNO TUNE \| 12.693s @ 105MPH 1/4 Mile

02-26-2018, 06:43 PM	#2
chevyracingfan Drives: 2018 camaro ls 1le Join Date: Nov 2014 Location: Derry,NH Posts: 206 View My Garage	1=apr splitter 2=zl1 rockers 3=rear spoiler 4=trans cooler 5=3 inch cowl hood(fiberglass) 6=paint calipers and rotor hats 7=if any cash left paint stripes instead of vinyl

02-28-2018, 11:13 AM	#3
600hp-lpe Drives: 2010 Join Date: Jul 2009 Location: NH Posts: 4,788	upgraded to ZL1 calipers and rotors ARH headers (ceramic coated) 3" stainless exhaust Quad tipped ARH mufflers 1LE rear diffuser for exhaust granetelli plug wires

03-01-2018, 06:31 AM	#4
Elite1LE Drives: 2015 1LE SS/RS Join Date: Jan 2015 Location: Simsbury, CT Posts: 33	Planning to install by the end of March. GPI SS3 cam/package GPI rod mod and ported intake New Era Performance ported throttle body Powerbond 25% UDP 160deg Thermostat

03-01-2018, 04:22 PM	#5
Slowhawk Drives: 1999 Trans Am Join Date: Jul 2009 Location: Bridgewater,Ma Posts: 2,017	I don't have plans, just drive my 1979 TA turd. Spend to much time building the 5th gen's.

03-01-2018, 05:23 PM	#6
Kopterman Drives: 2014 Bright Yellow 2SS/RS Join Date: Apr 2014 Location: NH Posts: 794 View My Garage	Done with my mods until my clutch gives out or I break something!

03-02-2018, 08:39 AM	#8
Bottledbird68 Drives: 2011 2ss convertible, 68 firebird Join Date: Aug 2016 Location: Athol ma Posts: 142	Finally install the cam I bought last year, nitrous kit I just bought, and try to find a deal I’m happy with on a bigger rear end lol. That and maybe a drag wheel/tire setup as well. And have some fun with it ��

03-05-2018, 07:41 PM	#10
paul3078 Drives: 2024 Nitro Yellow 1SS 1LE Join Date: Jun 2016 Location: Tallmadge Ohio Posts: 209 View My Garage	ZL-1 Rear differential kit (differential, axles driveshaft, etc), Spohn lower control arms, rear trailing arms, rear toe links, all with poly bushings, poly upper control arm bushings.Pegasus solid rear subframe mounts. Racestar recluse 17x4.5 fronts, 17x10.5 rears, tires still TBD. Hawk HPS 5.0 pads F & R, Z-28 brake duct cooling kit (may not work because of supercharger intercooler pump but haven't pulled off nose for test fit yet. WHEW! I think that's it! Oh yeah and fix dumb move on my part not putting sealer on flywheel bolts causing minor oil leak. (DONE as of yesterday)

03-10-2018, 04:38 PM	#14
BTRSS Drives: 2011 Camaro SS Supercharged Join Date: Sep 2012 Location: Massachusettes Posts: 656 View My Garage	Getting ready for the Boston World of Wheels later this month, so in addition to all the "stuff" I did over the winter I just all my all my chrome goodies back: - Factory Strut Bar and all the mounting hardware -- This is really a piece of art for us "old" guys that love chrome! - Door Catches -- Installed today, looks awesome! - MGW Shift Post -- Although I'm probably not going to install it. - Misc nuts and bolts -- Now I just have to remember where they go, LOL! - 3GCustomz Door and trunk props painted to match the interior theme by Lupe Bass Pro 1 month away!!