Any photos of convertable trunk release cable routing? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

rray · 02-02-2014, 11:09 AM

I bought a convertable trunk release cable to connect in case the release solinoid fails. I have a sub box mountes so there is no opening the trunk in case of solenoid failure unless you can stomp the sub box out of the way and reach the child trap latch.

So what I am looking for a a photo or diagram of routing of this cable on the convertable, as the cable came with plastic routing clips and I want the path to be the same.

Thanks in advance,
Robert

rray · 02-07-2014, 08:16 PM

I did not find any photos, but was able to figure it out, and it was so easy I made a DIY in case you want to run this cable.

DIY: Run A Manual Trunk Latch Cable Around Your Sub Enclosure

02-02-2014, 11:09 AM	#1
rray Drives: 2013 GAZ 2SS/RS Join Date: Feb 2012 Location: Fremont, CA Posts: 418	Any photos of convertable trunk release cable routing? I bought a convertable trunk release cable to connect in case the release solinoid fails. I have a sub box mountes so there is no opening the trunk in case of solenoid failure unless you can stomp the sub box out of the way and reach the child trap latch. So what I am looking for a a photo or diagram of routing of this cable on the convertable, as the cable came with plastic routing clips and I want the path to be the same. Thanks in advance, Robert __________________ If you see it, get it, for tomorrow it may be gone!

02-07-2014, 08:16 PM	#2
rray Drives: 2013 GAZ 2SS/RS Join Date: Feb 2012 Location: Fremont, CA Posts: 418	I did not find any photos, but was able to figure it out, and it was so easy I made a DIY in case you want to run this cable. DIY: Run A Manual Trunk Latch Cable Around Your Sub Enclosure __________________ If you see it, get it, for tomorrow it may be gone!