Add HUD to your 2010

[baba booey]

Originally Posted by slick rick

Here's a PDF version of the PowerPoint file.

The PDF did not give the instuctuns on how to disable and enable the SIR can some one post this info please.

[2SSRS@Gen5diy]

All you need to do is disconnect the battery and go smoke a cigarette so the capacitors discharge.

[camaro4mybday]

ofer i know you are killing your self trying to get this done, the only other thing id do besides pulling the dash is removing the duct if it can be accessed but the other ways i really dont want to chance blowing 500 bucks on the hud

[2SSRS@Gen5diy]

Originally Posted by camaro4mybday

ofer i know you are killing your self trying to get this done, the only other thing id do besides pulling the dash is removing the duct if it can be accessed but the other ways i really dont want to chance blowing 500 bucks on the hud

+1 with you don't cut the HUD.

[dragom]

I would rather wait on Ofer and see what he comes up with cutting the HUD in half if something falls off or gets broken there is no refund you are out. Maybe the dash will have to be pulled but at least I can wait to find out before I order the HUD I am kind of scared to pull the dash in a way and if there is an easier way I would rather take it.

[DWALEX]

With patience all goes well, eat turkey

[xx_ED_xx]

If you end up having to pull the dash it is not a hard as you think, just helps to have an extra set of hands.

[DWALEX]

let's think as we have a 2011 camaro, and we have to replace the hud for another one, what we need to do??,,,take off the dash, isn't it.

[2SSRS@Gen5diy]

To all that fallow this thread have a good Thanksgiving and come back to see how we do the install, We will have it in by Sunday.

[daphatgrant]

Best of luck and have an excellent turkey day!

[DWALEX]

good Thanksgiving to everyone,,,and good luck Ofer,,,we're waiting for....

[lionssfan]

Originally Posted by DWALEX

good Thanksgiving to everyone,,,and good luck Ofer,,,we're waiting for....

Ofer, something to consider. Sometimes on dash pulls we pull the whole column. Service information has you take the steering column apart. Rather then removing the steering wheel, air bag, control arm switches off the column. When pulling the column that way you pull the whole thing as a unit. Pull the bolt at the rag joint at the base of the column and have some main elect connectors. This also gives you more room to work and your not taking the column apart. just make sure the steering wheel is centered when you pull the column. and lock the steering wheel in place or tape it in place. so the SIR ribbon does not get out of postion. in other words if the steering wheel is rotated to many times one way or the other the sir ribbon will break or be out of position. you want to put the column back on as it came off. don't rotate the steering wheel after taking it off. keep the same orientation as it came off. I know your looking for the shortest route to get this hud in. Hopfully you won't have go this far. Good luck and happy turkey day

[trm0002]

Originally Posted by Darth Martel

I was going to do a powerpoint presentation on how to remove the dash per GM's standards. I was waiting to see what Ofer came up with as far as installing the HUD before I did that though. If enough people are wanting then I can put it together. Just let me know.

Count me the hell in on getting that powerpoint but not because of HUD- I screwed up my dash (you know, high heels upsidedown on the passenger seat...) I simply need to replace the dash but at first look, it's going to BLOW without detailed help. The PPT would be a God-send.

Never mind- found the ppt and the pdf version a few pages back...

[camaro4mybday]

Im going to have a great thanksgiving due to patrickt my hud has shipped and hopefully will be here friday!!!!!!