Tick adjustable 5th gen Camaro Master cylinder NEW - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

WHAMMO · 04-30-2019, 12:31 PM

It doesnt fit my application(Spec Mini Twin) so cant use it. It will fit 99.9% other application.

Installed and bled but never used.

My loss your gain.

WHAMMO · 07-28-2019, 03:19 PM

Price drop 375$ shipped!

Jayjellyfish212 · 08-23-2019, 08:30 PM

Dang ...How come it didn’t fit your application? I was just looking at these and wasn’t aware of any application figment issues. I just put in a McLeod RXT twin disk. I upgraded the slave cylinder to with the Tick billet sleeve support & speed bleeder. I wonder if this would be an issue on my application now.. hmm

Do you have any pictures of the adjustable master clutch cylinder you got?? If I call
Tick and see if it would work on mine with my set up I would be interested in taking it off your hands but I wanna be certain it will work on my new set up.

WHAMMO · 09-13-2019, 10:31 AM

Quote:

Originally Posted by Jayjellyfish212

Dang ...How come it didn’t fit your application? I was just looking at these and wasn’t aware of any application figment issues. I just put in a McLeod RXT twin disk. I upgraded the slave cylinder to with the Tick billet sleeve support & speed bleeder. I wonder if this would be an issue on my application now.. hmm

Do you have any pictures of the adjustable master clutch cylinder you got?? If I call
Tick and see if it would work on mine with my set up I would be interested in taking it off your hands but I wanna be certain it will work on my new set up.

Like I said, there is no fitment issue. I am probably the only guy in America in a street car running a Mini Twin. My clutch is really tiny and it's not even supposed to work with our transmission; even Spec was wrong on the slave cyl size. I had a 2.5" spacer machined for it to work.

So It will fit 99.99% with all the other clutch stock or not stock.

olblue75 · 09-16-2019, 04:13 AM

Does this go inside the car?

WHAMMO · 04-21-2020, 10:27 AM

Bump...350$ shipped

WHAMMO · 05-10-2020, 01:54 PM

Quote:

Originally Posted by olblue75

Does this go inside the car?

In the car!! behind the pedals and in the firewall.

SabsBee · 05-19-2020, 08:50 PM

still got this?

04-30-2019, 12:31 PM	#1
WHAMMO Drives: 13' 1LE Join Date: Apr 2012 Location: Canada Posts: 2,640	Tick adjustable 5th gen Camaro Master cylinder NEW It doesnt fit my application(Spec Mini Twin) so cant use it. It will fit 99.9% other application. Installed and bled but never used. My loss your gain. Attached Images __________________ 13' 1LE Old setup: TSP 231-236/Tick 660/.105 PR, UDP, SW LT 2'' & HFC, stock NPP & H pipe, VR-DRX CAI, air scoop, Goertz1 manifold, 102mm BBK, 26" Toyo DRs, Forgestars R17x10 & F18x8, rear seat delete, remote Pat G tune Autocal, 7400 limiter, Spec Mini Twin. 91oct. 11.90@122.3, 0-60ft 2.0 / 11.99@123.6, 0-60ft 2.1 DA+819 ...519RWHP SAE Solid roller SBE LS3, FED, LLSR, 91oct, 605rwhp N/A. Tuned by Pat G. Build by me. Last edited by WHAMMO; 09-13-2019 at 10:29 AM.

07-28-2019, 03:19 PM	#2
WHAMMO Drives: 13' 1LE Join Date: Apr 2012 Location: Canada Posts: 2,640	Price drop 375$ shipped! __________________ 13' 1LE Old setup: TSP 231-236/Tick 660/.105 PR, UDP, SW LT 2'' & HFC, stock NPP & H pipe, VR-DRX CAI, air scoop, Goertz1 manifold, 102mm BBK, 26" Toyo DRs, Forgestars R17x10 & F18x8, rear seat delete, remote Pat G tune Autocal, 7400 limiter, Spec Mini Twin. 91oct. 11.90@122.3, 0-60ft 2.0 / 11.99@123.6, 0-60ft 2.1 DA+819 ...519RWHP SAE Solid roller SBE LS3, FED, LLSR, 91oct, 605rwhp N/A. Tuned by Pat G. Build by me.

08-23-2019, 08:30 PM	#3
Jayjellyfish212 Drives: 2014 1LE Join Date: Aug 2015 Location: Upstate NY Posts: 2,050 View My Garage	Dang ...How come it didn’t fit your application? I was just looking at these and wasn’t aware of any application figment issues. I just put in a McLeod RXT twin disk. I upgraded the slave cylinder to with the Tick billet sleeve support & speed bleeder. I wonder if this would be an issue on my application now.. hmm Do you have any pictures of the adjustable master clutch cylinder you got?? If I call Tick and see if it would work on mine with my set up I would be interested in taking it off your hands but I wanna be certain it will work on my new set up. __________________ Car mods: never enough!

09-16-2019, 04:13 AM	#5
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,064	Does this go inside the car? __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

04-21-2020, 10:27 AM	#6
WHAMMO Drives: 13' 1LE Join Date: Apr 2012 Location: Canada Posts: 2,640	Bump...350$ shipped __________________ 13' 1LE Old setup: TSP 231-236/Tick 660/.105 PR, UDP, SW LT 2'' & HFC, stock NPP & H pipe, VR-DRX CAI, air scoop, Goertz1 manifold, 102mm BBK, 26" Toyo DRs, Forgestars R17x10 & F18x8, rear seat delete, remote Pat G tune Autocal, 7400 limiter, Spec Mini Twin. 91oct. 11.90@122.3, 0-60ft 2.0 / 11.99@123.6, 0-60ft 2.1 DA+819 ...519RWHP SAE Solid roller SBE LS3, FED, LLSR, 91oct, 605rwhp N/A. Tuned by Pat G. Build by me.

05-19-2020, 08:50 PM	#8
SabsBee Transforming Drives: Transformer Edition Camaro Join Date: Nov 2014 Location: North Carolina Posts: 36 View My Garage	still got this? __________________ Rick P Dual Masters in Special and General Ed Camaros because they have the personality you design.