GPI VVT 3 Cam Finally Installed - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Pro Stock John · 07-27-2018, 02:23 PM

Any track updates?

jergarr · 07-28-2018, 09:48 AM

Quote:

Originally Posted by Pro Stock John

Any track updates?

Sorry, I haven't been on the forum too much lately. I've been able to get out to the track twice and ran a 11.9. I can't recall the 60 ft, i think it was in the 1.8x range. Once I chase down this exhaust rattle i got going on im gonna go to the track soon and try to improve my times.

Lsx_Matt · 07-29-2018, 01:00 PM

Are you on a radial? And I thought you normally see higher numbers than that with those mods? I’ve seen other post of people saying 7.30 1/8 so low 11s 1/4 range cam only with the ss3 but I don’t know how much I believe it yet. Been wanting to go with this cam myself. I currently run high 7s with just bolt ons on stock cam.

jc615 · 07-29-2018, 04:38 PM

Quote:

Originally Posted by Lsx_Matt

Are you on a radial? And I thought you normally see higher numbers than that with those mods? I’ve seen other post of people saying 7.30 1/8 so low 11s 1/4 range cam only with the ss3 but I don’t know how much I believe it yet. Been wanting to go with this cam myself. I currently run high 7s with just bolt ons on stock cam.

Depends on a lot of factors. Experience being the biggest. A 1.8 60’ is not going to get you great times. My last time out was first time in 2 years. Dropped .3 seconds from first to second pass just getting used to things again

jergarr · 07-29-2018, 08:18 PM

Quote:

Originally Posted by Lsx_Matt

Are you on a radial? And I thought you normally see higher numbers than that with those mods? I’ve seen other post of people saying 7.30 1/8 so low 11s 1/4 range cam only with the ss3 but I don’t know how much I believe it yet. Been wanting to go with this cam myself. I currently run high 7s with just bolt ons on stock cam.

Low 11s are definitely doable. I just need more seat time. Both times ive gone to the track ive only been able to get a few runs in each. One time it was because they had bracket racing going on and the other a car wrecked pretty bad.

Redgt03 · 07-30-2018, 01:53 PM

Nice!

butters · 07-30-2018, 02:14 PM

Car sounds great. Who did the install and tune?

edit: nevermind, saw the sheet. How did you like working with Sound Performance.?

jergarr · 07-30-2018, 09:07 PM

Quote:

Originally Posted by butters

Car sounds great. Who did the install and tune?

edit: nevermind, saw the sheet. How did you like working with Sound Performance.?

Anthony Manna @ Manna Motorsports did the install and sound performance only did the tuning. They were both great to work with. Never had any issues and they were both quick to reply to any questions I had.

Pro Stock John · 07-31-2018, 12:13 PM

You made good numbers, you should go 11.3's or better with a good 60. I went 1.47 on Hoosier slicks, so if you get those, traction won't be an issue.

07-27-2018, 02:23 PM	#29
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	Any track updates? __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

07-30-2018, 01:53 PM	#34
Redgt03 Drives: 2011 Camaro SS Join Date: Sep 2017 Location: Peoria Posts: 254	Nice! Last edited by Redgt03; 07-30-2018 at 02:36 PM.

07-31-2018, 12:13 PM	#37
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	You made good numbers, you should go 11.3's or better with a good 60. I went 1.47 on Hoosier slicks, so if you get those, traction won't be an issue. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

07-29-2018, 01:00 PM	#31
Lsx_Matt Drives: 2012 Camaro 2ss Join Date: Aug 2017 Location: Florida Posts: 47	Are you on a radial? And I thought you normally see higher numbers than that with those mods? I’ve seen other post of people saying 7.30 1/8 so low 11s 1/4 range cam only with the ss3 but I don’t know how much I believe it yet. Been wanting to go with this cam myself. I currently run high 7s with just bolt ons on stock cam.

07-30-2018, 02:14 PM	#35
butters Drives: 2010 2SS/RS L99 Join Date: Jul 2011 Location: Chicago, IL Posts: 1,139 View My Garage	Car sounds great. Who did the install and tune? edit: nevermind, saw the sheet. How did you like working with Sound Performance.?