Rotor Pad SHIMS & Caliper Bolts - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

shu92870 · 05-10-2020, 09:25 PM

SO im putting all the parts back on the car i took off.
New F/R Bearings
New Rotors
New Pads
New Caliper Bolts
New Wheel Sensors
New SS Brake Lines

I just noticed the Caliper bolts are different. I definitely have the wrong ones for the rear. They are WAY TOO SHORT. Damnit.
But the fronts are close. New ones have a washer on them and maybe a full two threads shorter?

Still good to use?

Rear pads came with shims.

Use the shims?

Use the brembo grease or the Permatex Silicone?

05-10-2020, 09:25 PM	#1
shu92870 Drives: 2014 Camaro SS 1LE Join Date: Oct 2019 Location: Bakersfield CA Posts: 196	Rotor Pad SHIMS & Caliper Bolts SO im putting all the parts back on the car i took off. New F/R Bearings New Rotors New Pads New Caliper Bolts New Wheel Sensors New SS Brake Lines I just noticed the Caliper bolts are different. I definitely have the wrong ones for the rear. They are WAY TOO SHORT. Damnit. But the fronts are close. New ones have a washer on them and maybe a full two threads shorter? Still good to use? Rear pads came with shims. Use the shims? Use the brembo grease or the Permatex Silicone? Attached Images Last edited by shu92870; 05-10-2020 at 09:34 PM. Reason: pics