05-13-2012, 03:27 PM | #1 |
Dawn & Troy's 11 CamaroSS
|
Driver Seat Question
I just bought a 2011 SS for my wife and I dont understand why the Passanger seat will tilt foward using the handle on the back and the driver seat will not. i have to tilt it with the power adj only.
Any Ideas? Thanks Troy Last edited by 2011OrangeSS; 05-13-2012 at 03:55 PM. |
05-13-2012, 05:25 PM | #2 |
Drives: 2010 RJT Camaro SS/RS LS3 Join Date: Apr 2012
Location: Raleigh-Durham, NC
Posts: 150
|
Take it to the dealership for warranty repair. Mine had the same problem, and they had to replace a part on it. I bought mine used, though, not sure if yours is new. It'll be covered under warranty.
|
05-13-2012, 05:36 PM | #3 |
ace5.org
|
Yeah, if your seat won't move when you pull it with the handle on the back take it to a dealership....it should work.
__________________
Stock...For Now.
|
05-14-2012, 10:16 AM | #4 |
Drives: GM Vehicles Join Date: Jun 2010
Location: Michigan
Posts: 9,328
|
Hello Troy,
Does the driver's seat have a handle to adjust the tilt of the seat or electrical only? If you are having any trouble with the seats and you think that it should perform this function, then the best thing to do is to take it to your local dealership and check to see if this is something that may be covered under warranty. Hope this helped! Brandon Chevrolet Customer Service |
05-14-2012, 10:17 AM | #5 |
Drives: 2011 Camaro 2SS/RS (Black) L99 Join Date: Aug 2010
Location: Pilot Point, Texas
Posts: 2,185
|
yours is broke..
|
05-16-2012, 10:04 PM | #6 |
Drives: Black 2011 Camaro LS Join Date: Feb 2011
Location: Texas
Posts: 1,694
|
Same thing happened to my passenger seat. They had to realign the internal lever and it was fine after that.
__________________
White Fender Hashes from Big Worm Graphix with Custom White Bowties
GM Factory Remote Start and Factory Key Fob SS Fascia, Factory RS HIDs, Plasma P13W fog lights Non-RS to RS and fog light harness by Gen5DIY LED Interior, Trunk, and Licence Plate lights in white ZL1 Spoiler with Gen5DIY harness Factory NPP cat back Blacked out tail light bezels Factory 20 inch wheels wrapped in Nitto Motivos Lowered 1.25inch on Eibach Pro springs |
05-17-2012, 05:37 AM | #7 |
Account Suspended
Drives: 2010 2SS/RS JFB Join Date: Mar 2012
Location: DFW
Posts: 807
|
There was a thread that mentioned a TSB and inadequate lubrication of the release mechanism. Could be what's wrong with yours. Dealer should fix you right up.
|
05-18-2012, 08:18 PM | #8 |
Dawn & Troy's 11 CamaroSS
|
Thanks Guys, I will take it by next week. the Drivers side is all elec. and the handle on the back of the seat will not lift up to tilt forward like the passanger side does.
|
|
|
|
|