Exhaust for V6 3.6L 2014 RS Camaro - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BlkBumblebee10 · 03-25-2015, 10:56 AM

What type of exhaust should I get? Something that sounds good.

arkentect · 03-25-2015, 10:58 AM

http://www.camaro5.com/forums/showthread.php?t=33104

Start here

judkins75 · 03-25-2015, 11:02 AM

The mrtv2 brought my 2014 1lt/rs alive. Sounds mean and loud likes its suppose to.

jcamaro · 03-25-2015, 11:06 AM

Depends on your budget. If you have $1,000+, get a MRT v1 or v2 with a resonated x-pipe installed. If you want to keep it low budget, get a set of Flowmaster Super 44s for less than $300 installed. Here is what my 2014 1LS sounds like:

hzisfrom1994 · 03-25-2015, 11:41 AM

Quote:

Originally Posted by jcamaro

Depends on your budget. If you have $1,000+, get a MRT v1 or v2 with a resonated x-pipe installed. If you want to keep it low budget, get a set of Flowmaster Super 44s for less than $300 installed. Here is what my 2014 1LS sounds like:

Bro WTF, the MRT doesnt cost &1000+. The V1 is 450 and the V2 is like 600 only, and the res x pipe is only 100, and is up to the person whether they want the res x pipe or not, depending whether they feel the car is too loud or not.

hzisfrom1994 · 03-25-2015, 11:42 AM

First what is your budget OP?

nickster127 · 03-25-2015, 11:50 AM

yeah they are all right, it depends on your budget...
MRTV are very popular and sound great.
I got my exhaust from the dealer when they built my camaro, and dont mind it, especially with an open NPP mod.

Crowmag · 03-25-2015, 02:44 PM

I'm looking also. I'm leaning very heavily toward the MRT V2.0 axle back. I was going to go for a full blown cat back and possibly high flow cats but the money for the HP gain isn't impressive enough for me to justify the cost.

Rabidsquirrel22 · 03-25-2015, 03:31 PM

I just got my MRT v2 installed a couple days ago. I'm very happy with it! Sounds amazing above 3k RPMs. It does drone though around the 2k RPM mark, such as during highway driving, so if that would bother you, you might want to consider the resonated x pipe as well. I'm going with the x pipe personally.

mikescamaro12 · 03-25-2015, 05:05 PM

Quote:

Originally Posted by jcamaro

Depends on your budget. If you have $1,000+, get a MRT v1 or v2 with a resonated x-pipe installed. If you want to keep it low budget, get a set of Flowmaster Super 44s for less than $300 installed. Here is what my 2014 1LS sounds like:

evening sir , can i ask where did you get the flowmaster system , all i can see on my looks up is for the mustang ,,by the way nice sounding camaro ,,

hzisfrom1994 · 03-25-2015, 09:24 PM

Quote:

Originally Posted by Rabidsquirrel22

I just got my MRT v2 installed a couple days ago. I'm very happy with it! Sounds amazing above 3k RPMs. It does drone though around the 2k RPM mark, such as during highway driving, so if that would bother you, you might want to consider the resonated x pipe as well. I'm going with the x pipe personally.

I have the MRT V1, have drone too but I dont want to quieten the sound car, so I am going to get solo j pipes to kill the drone.

BlkBumblebee10 · 03-26-2015, 09:26 AM

Quote:

Originally Posted by jcamaro

Depends on your budget. If you have $1,000+, get a MRT v1 or v2 with a resonated x-pipe installed. If you want to keep it low budget, get a set of Flowmaster Super 44s for less than $300 installed. Here is what my 2014 1LS sounds like:

Here is what Economy Muffler a business in my area that specializes I should get http://www.autoanything.com/exhausts...0A4018727.aspx

What would this sound like? I love the way yours sounds or would it be close to the same sound?
Thanks

enzia35 · 03-26-2015, 10:27 AM

Honestly can't go wrong with Magnaflow. Loved it on my old Camaro.

jcamaro · 03-26-2015, 05:54 PM

Quote:

Originally Posted by mikescamaro12

evening sir , can i ask where did you get the flowmaster system , all i can see on my looks up is for the mustang ,,by the way nice sounding camaro ,,

I went to a local muffler shop that had them in stock. They are just axle back mufflers that are pretty much universal. Single in, single out, 1 muffler for each side. If you're seeing a "setup" or "kit" then that's most likely pre-bent pipes to connect to your exhaust tips. Best bet is to find a muffler shop and see if they have Flowmaster or Magnaflow in stock. If not, order the mufflers from Jegs or some other site and take them to the muffler shop to install. Unless you have the equipment and experience to bend the pipes and weld them on.

Quote:

Originally Posted by BlkBumblebee10

Here is what Economy Muffler a business in my area that specializes I should get http://www.autoanything.com/exhausts...0A4018727.aspx

What would this sound like? I love the way yours sounds or would it be close to the same sound?
Thanks

That's more than you need to get. If you want the sound I have on a budget, all you need to get are the mufflers and have them installed. See my above reply to Mikescamaro12.

The mufflers have different configurations of where the inlet and outlet are to make connecting to the exhaust pipes easier. They function the same.

03-25-2015, 10:56 AM	#1
BlkBumblebee10 Drives: 2014 Black RS Camaro V6 Join Date: Mar 2015 Location: Rockledge, FL Posts: 24	Exhaust for V6 3.6L 2014 RS Camaro What type of exhaust should I get? Something that sounds good.

03-25-2015, 11:06 AM	#4
jcamaro Obsessed Much? Drives: 2015 Silver 1SS/RS M6 Join Date: Aug 2009 Location: Las Vegas Posts: 934	Depends on your budget. If you have $1,000+, get a MRT v1 or v2 with a resonated x-pipe installed. If you want to keep it low budget, get a set of Flowmaster Super 44s for less than $300 installed. Here is what my 2014 1LS sounds like: __________________ 2015 1SS RS M6

03-25-2015, 11:50 AM	#7
nickster127 Black 2014 Camaro 1LT RS Drives: 2014 1LT Black,NPP, RS, Tints Join Date: May 2014 Location: New Jersey Posts: 261 View My Garage	yeah they are all right, it depends on your budget... MRTV are very popular and sound great. I got my exhaust from the dealer when they built my camaro, and dont mind it, especially with an open NPP mod. __________________ 2014 Camaro 1LT, RS, NPP. (NJ )

03-26-2015, 10:27 AM	#13
enzia35 Drives: '16 Garnet Red 1SS Join Date: Mar 2014 Location: College Station, TX Posts: 3,450	Honestly can't go wrong with Magnaflow. Loved it on my old Camaro. __________________ '16 Camaro 1SS '18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata

03-25-2015, 10:58 AM	#2
arkentect Drives: 2010 Camaro SGM 1LT M6 Join Date: Jan 2015 Location: Rochester, NY Posts: 1,630	http://www.camaro5.com/forums/showthread.php?t=33104 Start here

03-25-2015, 11:02 AM	#3
judkins75 Silver Shark Drives: 2014 2SS GM Npp 6 speed manual Join Date: Nov 2014 Location: Wyoming Posts: 131 View My Garage	The mrtv2 brought my 2014 1lt/rs alive. Sounds mean and loud likes its suppose to.

03-25-2015, 11:42 AM	#6
hzisfrom1994 ZYJ Drives: 2017 1SS Camaro/6 speed Join Date: Sep 2014 Location: Miami, FL Posts: 1,346	First what is your budget OP?

03-25-2015, 02:44 PM	#8
Crowmag Drives: 2015 2SS/RS L99 Join Date: Dec 2014 Location: AZ Posts: 113 View My Garage	I'm looking also. I'm leaning very heavily toward the MRT V2.0 axle back. I was going to go for a full blown cat back and possibly high flow cats but the money for the HP gain isn't impressive enough for me to justify the cost.

03-25-2015, 03:31 PM	#9
Rabidsquirrel22 Drives: 2016 2SS Join Date: Dec 2014 Location: Clarkston, Michigan Posts: 104	I just got my MRT v2 installed a couple days ago. I'm very happy with it! Sounds amazing above 3k RPMs. It does drone though around the 2k RPM mark, such as during highway driving, so if that would bother you, you might want to consider the resonated x pipe as well. I'm going with the x pipe personally.