WTB 2010-2013 SS Roller for Project

[BigguyT]

I'm looking for a 2010-2013, (14-15-16 if the price is good), Roller ..can be theft recovery or minimal damage that can be repaired for a good price.

Thanks, and look forward to any replies with some for sale.

Terry

[lickwadater]

Terry- I have a Victory Red 2010 Camaro SS theft recovery roller available for sale. Here is the basic description of the car:

2010 Chevrolet Camaro SS LS3/6 speed theft recovery roller chassis for sale. Engine/trans, seats, rear discs & calipers & modules stolen. Slight damage to bodywork in rear trunk area, windshield cracked. Exterior is Victory Red with black stripes, interior is solid black. Column key was drilled out during theft.

Original owner lowered car and installed aftermarket upgrades to suspension. (Peddlers Springs, Adjustable Shocks, Trailing arms). Black rims with good rubber. Car to be sold without engine, trans, F&R seats, rear discs & calipers, and missing ECM and On-Star modules. Also missing is the gas pedal and rear view mirror and back up camera. Car comes with pictured complete exhaust system, however, catalytic converters are part of the exhaust headers and were stolen with the engine.

Price: $8,750 Obo

Replacement F & R power seats in black leather in perfect condition w/ full power driver’s seat available for sale separately from the car for an additional $2,500/all.

Photos- I have about 50 photos of the car that I can send you, after compressing the files down from the 121 MBs they presently are.

[Turbo99]

I have a 2010 fully intact but willing to remove the engine and sell with engine. Look for my for sale post. 15k for the car minus engine, car only has 18k miles on it in excellent condition.

[BigguyT]

Originally Posted by Turbo99

I have a 2010 fully intact but willing to remove the engine and sell with engine. Look for my for sale post. 15k for the car minus engine, car only has 18k miles on it in excellent condition.

Would be a perfect roller to buy if you lived in Canada... i would take it. Unfortunately that 15k turns into 19,820 converted,,then taxes on top at border and my vehicle registering place. and i haven't even added on shipping to here.. So ya can see where i'm going ,,its a wicked car..would love to have it. Just not fees ably practical on my end.

Appreciate the reply tho

T.

[Trepy]

http://www.camaro5.com/forums/showthread.php?t=463627
Give me the go and I will meet you at the bridge.

[BigguyT]

Originally Posted by Trepy

http://www.camaro5.com/forums/showthread.php?t=463627
Give me the go and I will meet you at the bridge.

I"m not wanting a complete car Trepy, Just a roller..i have my own drivetrain to go in.

[Trepy]

Originally Posted by BigguyT

I"m not wanting a complete car Trepy, Just a roller..i have my own drivetrain to go in.

Got ya. Well offer stands if you end up wanting to yank this one out and recoup some of your investment.

[ZL1C7]

I have a silver ZL1 Roller 10k

PM if interested

[Mitchellmario]

Also looking for one for a project also if some one knows where to find one