Installed my ZL1 pedals - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Magilla gorilla · 09-09-2012, 08:46 PM

Nice looking.....will have to look into getting some for my camaro

LimaCharlie · 09-09-2012, 11:50 PM

Quote:

Originally Posted by MS3DALE

The accelerator pedal is a full replacement,the brake/clutch pedals are covers

Is the accelerator pedal just screwed on the arm or do you replace everything (pedal and arm)?

Steve RS/SS · 09-10-2012, 04:14 AM

the accelerator pedal is a complete assembly. It is attateched with screws. All you have to do is unscrew it from the car unplug the wires that go to the assembly and reinstall it.

Rockey33 · 09-10-2012, 05:39 AM

Looking at getting these as well. Thanks for posting!

bluebox · 09-10-2012, 06:23 AM

Quote:

Originally Posted by MS3DALE

Part number for the accelerator pedal is 22741800
Part number for the brake and clutch pedal covers for manual transmission cars is 92173105 (x2)
I don't have the part number handy for the brake pedal cover for automatic cars,I can get it tomorrow once I get to the dealership.

Punched these numbers into http://www.gmpartsdirect.com/ and they came up at $95/manual set.

Classic design from the '60's-70's. Like it! On my growing mod list...

MS3DALE · 09-10-2012, 08:44 AM

Quote:

Originally Posted by MS3DALE

I don't have the part number handy for the brake pedal cover for automatic cars,I can get it tomorrow once I get to the dealership.

Part number for the ZL1 brake pedal cover for automatic cars....92173103

MS3DALE · 09-10-2012, 08:44 AM

Quote:

Originally Posted by Steve RS/SS

I couldn't wait until morning..just went out to the garage..sure enough it is metal... I stand corrected

bumblebeecamaro · 09-10-2012, 12:30 PM

Quote:

Originally Posted by MS3DALE

Part number for the ZL1 brake pedal cover for automatic cars....92173103

sweet. I'm probably one of the few peeps on this forum that doesn't want my SS to look like a ZL1 but I do like the looks of the pedals.

Steve RS/SS · 09-10-2012, 04:17 PM

Same here..I dont my SS to look like a ZL1 either but I had to have the pedals..

MS3DALE · 09-10-2012, 04:24 PM

Quote:

Originally Posted by bumblebeecamaro

sweet. I'm probably one of the few peeps on this forum that doesn't want my SS to look like a ZL1 but I do like the looks of the pedals.

Quote:

Originally Posted by Steve RS/SS

Same here..I dont my SS to look like a ZL1 either but I had to have the pedals..

Yep me too,don't want my SS to look like a ZL1,although I did also add the ZL1 rear splash guards for a little protection.

tramtwo · 09-10-2012, 11:04 PM

These are better for barefoot driving... my reefs get caught on the floor mats while shifting so I usually just kick them off.

babytiger · 09-10-2012, 11:18 PM

Quote:

Originally Posted by bumblebeecamaro

sweet. I'm probably one of the few peeps on this forum that doesn't want my SS to look like a ZL1 but I do like the looks of the pedals.

same here....

benji1997 · 03-13-2013, 03:31 PM

I'm one of the few peeps on this forum that doesn't mind my 2013 2LT/RS looking a little ZL-1ish. I purchased the blade wing spoiler and had the back window deck (with stop light) replaced with the ZL-1 deck. Now I'm getting the pedals. Just wish the dead pedal was part of the package. May not have 580 horses but 326 is good for my area. It's the hottest looker I've driven since my 1985 red Firebird/Trans Am. And it's nice to see 160 on the speedo. My TA went up to 85!http://i1339.photobucket.com/albums/...ps72286a25.jpg

Vengeance Graphix · 03-13-2013, 03:54 PM

looks good!

09-10-2012, 04:14 AM	#17
Steve RS/SS Drives: 2010 2SS/RS Join Date: Jul 2010 Location: New Jersey Posts: 324 View My Garage	the accelerator pedal is a complete assembly. It is attateched with screws. All you have to do is unscrew it from the car unplug the wires that go to the assembly and reinstall it. __________________

09-10-2012, 04:17 PM	#23
Steve RS/SS Drives: 2010 2SS/RS Join Date: Jul 2010 Location: New Jersey Posts: 324 View My Garage	Same here..I dont my SS to look like a ZL1 either but I had to have the pedals.. __________________

03-13-2013, 03:31 PM	#27
benji1997 Drives: 2013 IOM 2LT/RS M6 Join Date: Mar 2013 Location: Dartmouth, Ma. Posts: 443	I'm one of the few peeps on this forum that doesn't mind my 2013 2LT/RS looking a little ZL-1ish. I purchased the blade wing spoiler and had the back window deck (with stop light) replaced with the ZL-1 deck. Now I'm getting the pedals. Just wish the dead pedal was part of the package. May not have 580 horses but 326 is good for my area. It's the hottest looker I've driven since my 1985 red Firebird/Trans Am. And it's nice to see 160 on the speedo. My TA went up to 85!http://i1339.photobucket.com/albums/...ps72286a25.jpg Last edited by benji1997; 03-14-2013 at 06:21 PM. Reason: Add link

03-13-2013, 03:54 PM	#28
Vengeance Graphix Drives: 2017 Corvette Grand Sport Join Date: May 2010 Location: Central NJ Posts: 10,870	looks good! __________________ Vengeance Graphix

09-09-2012, 08:46 PM	#15
Magilla gorilla Drives: 2012 45th Edition 2LT RS,2005 Tahoe Join Date: Mar 2012 Location: Henderson Nevada Posts: 1,200 View My Garage	Nice looking.....will have to look into getting some for my camaro

09-10-2012, 05:39 AM	#18
Rockey33 Drives: 2012 IOM Camaro SS Join Date: Apr 2012 Location: Pennsylvania Posts: 167 View My Garage	Looking at getting these as well. Thanks for posting!

09-10-2012, 11:04 PM	#25
tramtwo Drives: 2021 1LE Join Date: Jul 2011 Location: N'Awlinz Posts: 6,315	These are better for barefoot driving... my reefs get caught on the floor mats while shifting so I usually just kick them off.