04-20-2013, 04:05 PM | #1 |
Camaro 5 Muscle
|
Project Revive Matte Stripes = Success !!
Ok guys. So the other day, I was looking at my matte flat lack stripes from the factory and finally realized that I could not take any longer how terrible they looked. Just to give you guys some background knowledge, My car is 3 years old. When it was around 1/2 a year old, I waxed my car for the first time using Mothers Caranuba Wax. Not knowing that waxing matte stripes would damage them, I went ahead and waxed them. Then over the following marks, I could see that they had swirls in them and wax reside. Realizing that, I did not wax them ever again to this day.
So now, 2 years later, I started to notice the wax build up a lot more and wanted a fix to it. I searched up the forums here on Camaro5 and came across the technique used by Adams Polishes. So I contacted Nick at Adams to get more info on this technique. The method used was to apple Brilliant Glaze on the stripes and then wipe the excess off. Then after that, apply Super VRT and then wipe the excess off. Lets just say that I am now hooked on Adams! These were the first products I ordered and man was I amazed. Just after I applied the Brilliant Glaze, my stripes were back to life. It didnt even need the Super VRT but I did it anyway so I can get the protection. I started on the back stripes which were small and as soon as I was done applying the Brilliant Glaze on the driver side stripe, I looked at the applicator and was amazed of all the dirt that the Brilliant Glaze lifted off my stripes (keep in mind I had just finished cleaning the car). I am truly amazed, and just finished ordering a whole set of goodies from Adams!! Here are some pictures of before anything was applied to show you how messed up my stripes were. Now here are pictures of the driver side stripes completed (Brilliant Glaze followed by Super VRT). Didnt take pictures of the Brilliant Glaze by itself because I didnt want to keep on taking the car in and out of the garage. And now, here are pictures of both sides completed. I want to thank Nick at Adams for helping me out with this project. I am completely amazed with how well these products worked on the stripes and brought them back to life. I am looking for a long future with Adams
__________________
TSW Donington 22" Matte Black / Corsa Cat-Back Exhaust / Kooks Signature Stepped Headers 1 3/4" - 1 7/8" / High Flow Cats / Custom Tune / CAI Cold Air Intake / BMR 1" Lowering Springs / VMax Ported Throttle Body / Heritage Grill / Havoc Rear Diffuser
|
04-20-2013, 05:06 PM | #2 |
Drives: 1968 Coupe, 2010 2SS, 2011 2SS/RS Join Date: Oct 2011
Location: WIsconsin
Posts: 1,252
|
Awesome job.
__________________
|
04-20-2013, 05:18 PM | #3 |
Drives: The shiny ones. Join Date: Mar 2010
Location: In the detail shop!
Posts: 5,979
|
Glad I could help Mike, HUGE turnaround on those stripes!
They were definitely due for some TLC. Thanks for posting the pics! |
04-20-2013, 07:12 PM | #4 |
Drives: Camaro Join Date: Mar 2013
Location: USA
Posts: 542
|
Look good!
|
04-20-2013, 07:41 PM | #5 |
I like teeth.
Drives: #198 Join Date: Oct 2009
Location: Ft. Lauderdale, Florida
Posts: 4,817
|
__________________
.
Please check out my youtube detailing channel: http://www.youtube.com/user/roshan517 "When you want to succeed as bad as you want to breathe, then you will be successful." |
04-20-2013, 08:09 PM | #6 |
Drives: '13 Roush S3 '16 Ram Sport 4X4 Join Date: Apr 2009
Location: Massachusetts
Posts: 3,100
|
Awesome! They look great now.
Thanks for the write-up. |
04-20-2013, 09:40 PM | #7 |
Camaro 5 Muscle
|
Thanks guys. I was even amazed when I only applied the Brilliant Glaze. They were all cleaned up. I didnt even need the VRT but that is the main product that will protect them. Well made product! I cant wait to use the Brilliant Glaze on my paint
__________________
TSW Donington 22" Matte Black / Corsa Cat-Back Exhaust / Kooks Signature Stepped Headers 1 3/4" - 1 7/8" / High Flow Cats / Custom Tune / CAI Cold Air Intake / BMR 1" Lowering Springs / VMax Ported Throttle Body / Heritage Grill / Havoc Rear Diffuser
|
04-20-2013, 09:43 PM | #8 |
Drives: Model S, Vette, Volt & Equinox Join Date: Feb 2013
Location: Ohio
Posts: 334
|
Now I want to get stripes so I can have them look that good!
|
04-20-2013, 09:44 PM | #9 |
LongTimeLurker
Drives: 2011 SIM 2SS/RS Convertible L99 Join Date: Dec 2012
Location: Napanee, Ontario
Posts: 434
|
Another product added to spring shopping list! My wife and my bank account are BOTH going to hate me!
Thanks Mikester
__________________
2011 2SS/RS |
04-20-2013, 09:44 PM | #10 |
Drives: 2011 2SS/RS/CGM/6M/Black stripes Join Date: Jun 2010
Location: Napa
Posts: 141
|
Looks good. Turtle wax ICE also works great on the stripes and takes about 2 minutes. Wipe on wipe off.
|
04-20-2013, 09:52 PM | #11 |
Camaro 5 Muscle
|
No problem And trust me, the Brilliant Glaze and the Super VRT will go a LONG way! I did the stripes and I barely lost anything in the bottle. Plus, the Brilliant Glaze can be used on the paint as well and I heard that it works amazingly. And the Super VRT can be used for trim around the car as well as tires!
__________________
TSW Donington 22" Matte Black / Corsa Cat-Back Exhaust / Kooks Signature Stepped Headers 1 3/4" - 1 7/8" / High Flow Cats / Custom Tune / CAI Cold Air Intake / BMR 1" Lowering Springs / VMax Ported Throttle Body / Heritage Grill / Havoc Rear Diffuser
|
04-20-2013, 09:53 PM | #12 |
Drives: 2010 Camaro 2SS - Black on Black Join Date: Aug 2010
Location: Jackson, TN
Posts: 731
|
That's a great 50/50 shot. Good job!
|
04-21-2013, 09:11 AM | #13 |
Camaro 5 Muscle
|
Thanks. It came out really great! Did more than what I expected!
__________________
TSW Donington 22" Matte Black / Corsa Cat-Back Exhaust / Kooks Signature Stepped Headers 1 3/4" - 1 7/8" / High Flow Cats / Custom Tune / CAI Cold Air Intake / BMR 1" Lowering Springs / VMax Ported Throttle Body / Heritage Grill / Havoc Rear Diffuser
|
04-21-2013, 09:41 AM | #14 |
Drives: 2012 Join Date: May 2012
Location: New Lenox, IL
Posts: 316
|
And the Adams army grows
|
|
|
|
|