03-14-2016, 03:50 PM | #15 |
Drives: 2013 camaro ss Join Date: Dec 2014
Location: La Habra California
Posts: 68
|
No way! Damn, I'm going to check mine. Thanks for the heads up
Sent from my SM-N910V using Tapatalk |
03-14-2016, 09:43 PM | #16 |
Drives: 2010 Camaro Join Date: Feb 2016
Location: Virginia
Posts: 56
|
I've talked to Ahmed and he said the latest VTC fixed the engine misfire issue.
|
03-15-2016, 05:44 AM | #17 |
|
Recalibrate the VTC like you did when it was fist installed that will fix many of the issues.
|
03-25-2016, 09:42 AM | #18 |
Drives: 2013 camaro ss Join Date: Dec 2014
Location: La Habra California
Posts: 68
|
I had that nasty engine code popped again, error stabilitrak, engine powered down. Anyone have any suggestions. I've tried recalibration the VTC. I uninstalled the vtc, waiting to hear.
Sent from my SM-N910V using Tapatalk |
04-07-2016, 07:05 PM | #19 |
my ZL1 did that several time over the years but dealer could'nt duplicate. on the 5th time I called onstar and they logged it. Went to dealer and got new ecu. 2012 had issues with the delphi computers. that could be the issue. I also have the vitesse with no issues so a faulty computer could be your problem. Good luck!!
|
|
02-02-2020, 03:59 PM | #20 |
Drives: Black on Black 2SS, ground eff Join Date: Jul 2009
Location: L.A
Posts: 39
|
Quick question, my buddy just gave me his throttle controller he has a v6 I have a v8 do i need to calibrate it?
|
02-09-2020, 07:49 AM | #21 |
Drives: 2012 2LT/RS Join Date: Oct 2011
Location: Northeast
Posts: 1,443
|
Pretty sure they are the same part for both engines, at least that's what his site shows. You should def recalibrate it, it's part of the procedure for install anyway.
No matter how many times I calibrated/reinstalled eventually I'd get the reduced power message and then limp mode. I'll probably be sending it back to Ahmed with hopes a new one won't do this and will report back here. |
|
|
|
|