2013 JDP 850 package Camaro ZL1 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Camaro 911 · 11-14-2019, 02:51 PM

2013 Supercharged JDP 850 package Camaro ZL1
The car is borderline perfect!!
(Only 2 small scratches on driver door and slight scratch on left wheel – both can be buffed)
Clean CarFax, no accidents, no damage.
Low miles 41,xxx on the odometer!
Loaded, Heads up display, Heated seats, Navigation, etc.
Currently low boost @14psi, 702whp on 93 pump Gas!, Car has flex fuel setup which includes 1050 cc injectors and Fore 400/400 Dual fuel pump setup enabling over 900 whp on E85. Has over $25k worth of supporting mods! Car purchased price was over $60K and with mods close to $90K!!
Asking $44k.
Serious buyers text me at 908-500-6803 to discuss details.
Mod List:
Engine / performance Carbon Fiber dipped, Cover 30% Tint CF hood wrap CF bowties CF taillight bezels Tinted side markers Tinted tails 3M paint protection Rock guards Spec springs ZL1 valve stem caps
• Roto-Fab Intake System with Oiled Filter
• Roto-Fab Big Gulp Adjustable Air Duct
• Roto-Fab W/W Reservoir Kit
• Windshield Washer reservoir relocation kit
• Katech Ported Throttle Body
• Fore 400/400 Dual fuel pump setup
• ATI Harmonic Balancer and Lingenfelter 18% OD Pulley with JDP-Spec HD Belt
• GripTech 2.50" Upper Pulley w/Hub
• Lingenfelter Supercharger Solid Isolator Coupling
• Metco Motorsports 100mm dual bearing supercharger idler pulley
• American Racing Headers 1 7/8" x 3" Long Tube Headers Short System with Cats
• Injector Dynamics ID1050x Direct Replacement Injectors
• D3 Performance heat exchanger w/Prospeed Tank
• Taylor Spark Plug Wires w/NGK TR7IX Iridium Spark Plugs
• Elite Engineering PCV Catch Can
• Lingenfelter 160° Thermostat
• Billet Stage III Positive Displacement 3-bolt camshaft JDP Motorsports 3-bolt cam conversion kit
• VMAX 87mm CNC ported throttle body
• ATI damper with 10% overdriven pulley and balancer
• KOOKS 1-7/8" long tube headers (catless)
• Goodyear 8-Rib gatorback Belt
• Yank 2800 Multi Disk TQ Converter
• Elite Engineering E2 catch can w/Black AN fittings & Black nylon braided line kit
• Katech C5-R timing chain
• Brian Tooley Racing LSx .660" lift platinum valve spring kit with titanium retainers
• Comp Cams LSx trunion Upgrade
• trend 1-Piece pushrods GM gaskets and seals
• balancer bolt Melling LS series
• front cover gasket/seal, water pump gaskets
• Maxima Racing High Performance Engine Oil
• Professional Installation by JDP Motorsports

11-14-2019, 02:51 PM	#1
Camaro 911 Camaro 911 Drives: 2018 Audi TTRS r40 WHP Join Date: Feb 2019 Location: NJ Posts: 12	2013 JDP 850 package Camaro ZL1 2013 Supercharged JDP 850 package Camaro ZL1 The car is borderline perfect!! (Only 2 small scratches on driver door and slight scratch on left wheel – both can be buffed) Clean CarFax, no accidents, no damage. Low miles 41,xxx on the odometer! Loaded, Heads up display, Heated seats, Navigation, etc. Currently low boost @14psi, 702whp on 93 pump Gas!, Car has flex fuel setup which includes 1050 cc injectors and Fore 400/400 Dual fuel pump setup enabling over 900 whp on E85. Has over $25k worth of supporting mods! Car purchased price was over $60K and with mods close to $90K!! Asking $44k. Serious buyers text me at 908-500-6803 to discuss details. Mod List: Engine / performance Carbon Fiber dipped, Cover 30% Tint CF hood wrap CF bowties CF taillight bezels Tinted side markers Tinted tails 3M paint protection Rock guards Spec springs ZL1 valve stem caps • Roto-Fab Intake System with Oiled Filter • Roto-Fab Big Gulp Adjustable Air Duct • Roto-Fab W/W Reservoir Kit • Windshield Washer reservoir relocation kit • Katech Ported Throttle Body • Fore 400/400 Dual fuel pump setup • ATI Harmonic Balancer and Lingenfelter 18% OD Pulley with JDP-Spec HD Belt • GripTech 2.50" Upper Pulley w/Hub • Lingenfelter Supercharger Solid Isolator Coupling • Metco Motorsports 100mm dual bearing supercharger idler pulley • American Racing Headers 1 7/8" x 3" Long Tube Headers Short System with Cats • Injector Dynamics ID1050x Direct Replacement Injectors • D3 Performance heat exchanger w/Prospeed Tank • Taylor Spark Plug Wires w/NGK TR7IX Iridium Spark Plugs • Elite Engineering PCV Catch Can • Lingenfelter 160° Thermostat • Billet Stage III Positive Displacement 3-bolt camshaft JDP Motorsports 3-bolt cam conversion kit • VMAX 87mm CNC ported throttle body • ATI damper with 10% overdriven pulley and balancer • KOOKS 1-7/8" long tube headers (catless) • Goodyear 8-Rib gatorback Belt • Yank 2800 Multi Disk TQ Converter • Elite Engineering E2 catch can w/Black AN fittings & Black nylon braided line kit • Katech C5-R timing chain • Brian Tooley Racing LSx .660" lift platinum valve spring kit with titanium retainers • Comp Cams LSx trunion Upgrade • trend 1-Piece pushrods GM gaskets and seals • balancer bolt Melling LS series • front cover gasket/seal, water pump gaskets • Maxima Racing High Performance Engine Oil • Professional Installation by JDP Motorsports Attached Images