Spec clutch stage 3 / factory fly wheel - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

derb83 · 06-23-2018, 07:55 AM

I have a spec clutch stage 3 part # sc663-2 and a factory flywheel for sale . I decided to take a different route and go twin disk . Fly wheel has roughly 50 miles . Clutch assy was installed and tested and is still in sealed packaging and boxed from spec un opened . Will take 525.00 for the clutch and flywheel combo . Clutch retails for 630 alone with no flywheel .

Cornflakes'Camaro · 06-27-2018, 08:52 PM

I'm interested in the clutch only, but what is the difference in your clutch and this one? I notice the "-2" is off the end, but any idea what that means?

FrankieBee · 06-28-2018, 08:54 AM

Quote:

Originally Posted by Cornflakes'Camaro

I'm interested in the clutch only, but what is the difference in your clutch and this one? I notice the "-2" is off the end, but any idea what that means?

http://www.specclutches.com/specclut...=6&o=2252&id=0

Looks like the "-2" item is for an OEM Flywheel while the item without the "-2" is to be used with a Spec flywheel.

derb83 · 07-01-2018, 06:07 PM

Correct the -2 is direct fit for a oem flywheel and does not need any shims or anything

derb83 · 07-01-2018, 06:10 PM

the -2 is direct fit for a oem flywheel and does not need any shims or anything

derb83 · 07-15-2018, 02:05 PM

Bump

WEISHAAR37 · 07-16-2018, 03:13 AM

PM sent

06-23-2018, 07:55 AM	#1
derb83 Drives: 2010 camaro ss Join Date: Nov 2017 Location: north carolina Posts: 57	Spec clutch stage 3 / factory fly wheel I have a spec clutch stage 3 part # sc663-2 and a factory flywheel for sale . I decided to take a different route and go twin disk . Fly wheel has roughly 50 miles . Clutch assy was installed and tested and is still in sealed packaging and boxed from spec un opened . Will take 525.00 for the clutch and flywheel combo . Clutch retails for 630 alone with no flywheel . Attached Images

06-27-2018, 08:52 PM	#2
Cornflakes'Camaro Counting down the days... Drives: Black 2011 2SS/RS Join Date: Mar 2011 Location: Fort Walton Beach, Fl Posts: 637 View My Garage	I'm interested in the clutch only, but what is the difference in your clutch and this one? I notice the "-2" is off the end, but any idea what that means? Attached Images __________________ Tick Performance Custom Cam w/ support mods/BBK LT Headers w/ midpipes/Straight Exhaust/Airaid Cold Air Intake/ZL1 Driveshaft/ZL1 Differential/Hendrix Engineering Offset Bushings/ZL1 Axles/BMR Rear Subframe Bushings/BMR Toe Rods/Carlyle Racing 15" Conversion/Jannetty Winsheild Bottle Scoop/Forgestar 15x10 Beadlocks wrapped in Mickey Thompson Radial Pros

07-01-2018, 06:07 PM	#4
derb83 Drives: 2010 camaro ss Join Date: Nov 2017 Location: north carolina Posts: 57	Correct the -2 is direct fit for a oem flywheel and does not need any shims or anything

07-01-2018, 06:10 PM	#5
derb83 Drives: 2010 camaro ss Join Date: Nov 2017 Location: north carolina Posts: 57	the -2 is direct fit for a oem flywheel and does not need any shims or anything

07-15-2018, 02:05 PM	#6
derb83 Drives: 2010 camaro ss Join Date: Nov 2017 Location: north carolina Posts: 57	Bump

07-16-2018, 03:13 AM	#7
WEISHAAR37 Drives: 2010 Camaro 1SS Join Date: Apr 2014 Location: Jacksonville AR Posts: 93 View My Garage	PM sent