Tremec TR6060 1LE ISSUES! - Page 16 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Inferno1LE · 02-10-2014, 01:14 PM

Well we learned that we could get automatics and everything will work, but then I won't know what to do with my left foot.

SVThis · 02-10-2014, 06:15 PM

Quote:

Originally Posted by markgws6

I find it amusing and funny that in so many years of R&D and engineering research, they cannot make of find a high performance tranny that shifts smoothly, even for 400+HP cars. I drove a Viper maybe 5 years ago and I remembered it shifted smooth at low speed but I did not get to drive it fast. I had a 68 GTO 350HP with a Muncie M21 in it and it shifted almost exactly the same as my 2013 (and that car had probably 300K miles on the tranny or more.) Did we never learn anything in all of those years??

I agree. It seems as if manufacturers have forgotten how to make a smooth shifting transmission. The newer cars are getting worse rather than better.

Inferno1LE · 02-14-2014, 09:03 PM

Anyone heard of or tried this "Anti-Venom" mod? Essentially, you are shimming out the shift detent bolt to make the detent spring softer, which translates to smoother shifting. It originated from a mod for the T56, but seems to show promise for the TR6060 as well. It's very popular with the Vettes and Challengers. Here it is on the Vette forum:

http://m.corvetteforum.com/c6-z06-di...ml?styleid=140

patternpilot · 02-14-2014, 10:17 PM

I read about the detent mod but could not find the bolt on the tremec. I even had the car on a lift and could not find it.

Inferno1LE · 02-14-2014, 10:26 PM

It's there. Way up top on the passenger side in front of the shifter. It threads in horizontally.

scottmorton · 12-03-2016, 05:03 PM

So I broke down and convinced the local dealer to disassemble and inspect my transmission. My specific complaints were excessive noise when the clutch was engaged at idle, second gear grind. They replaced a crap load of bearings for which I was privy to seeing the input shaft bearing outer race which had scratches all the way around the bearing surface. Upon return, I am happy to say that the transmission shifts much better and the ridiculous slapping noise I forgot to mention to them is no longer present. If you still have a warranty I suggest you [convince them / let them] do the work. The transmissions are obviously not assembled to spec by the manufacturer.

I will admit, there is still a notchy feeling to it to some degree especially cold, but a marked improvement none the less and certainly a very noticeable reduction in noise.

CrystalRedTintcoat · 12-03-2016, 07:32 PM

I put in a Monster Clutch after my pedal wouldn't rise any longer post track day at Sonoma Raceway. Imagine prying the clutch pedal from the floor with your foot so you could shift in the hills of San Francisco! That was not fun.

I also put in Monster's metal throw out bearing sleeve.

This setup seems to take even more of a beating and it makes the same noise as factory. It's a bit of a steep learning curve to get used to it but then pretty darn smooth. People who drive my car have a hard time at first.

LT1-S Twin Disc GEN5 Package - Rated at 700 RWHP/RWTQ
- Type of Package: Premium Package ( Incl. Slave ) [P]
- Flywheel Option: 28lb. Billet Steel Flywheel [28LBSLSx]

"Our easiest clutch to drive that will hold a stout 700 rwhp, and be abused without mercy! This clutch is a fantastic unit that comes complete with all hardware and a billet steel flywheel. The LT1-S has been tested to in excess of 7,500 rpm’s without release issues and can be driven by a 100 lbs person easily. Great for the guys with n/a setups or power adders looking to daily drive their cars or take them to the track, this setup will do it all. *Absolutely no chatter is to be expected of this unit, it will drive factory smooth!"

Sent from my iPad using Tapatalk Pro

02-14-2014, 10:17 PM	#214
patternpilot Drives: 2012 2SS/RS Join Date: Aug 2011 Location: Tri-Cities WA. Posts: 928 View My Garage	I read about the detent mod but could not find the bolt on the tremec. I even had the car on a lift and could not find it. __________________ There's more to life than gas mileage LS3, Whipple, Custom Comp Cam, springs, pushrods, timing set, CAI intake, Apex cold air scoop, Doug Thorley TRI-Y headers, Billet Custom Products baffled Valve covers, Mighty Mouse Catch can, ADM FPCM, ZL1 fuel pump, MSD boost-a-pump, Hex Vent hood vents, ProSport gauges(fuel pressure, AFR, Boost), Corsa, 100 cell Cats. Jannetty remote tuned, Pfadt trailing arms, all parts user installed. No Dyno yet. Manual trans. 3.45 gears.

12-03-2016, 07:32 PM	#217
CrystalRedTintcoat Drives: 2013 2SS 1LE NPP GBE Join Date: Sep 2012 Location: Bay Area, online, & in my 1LE Posts: 2,667 View My Garage	Tremec TR6060 1LE ISSUES! I put in a Monster Clutch after my pedal wouldn't rise any longer post track day at Sonoma Raceway. Imagine prying the clutch pedal from the floor with your foot so you could shift in the hills of San Francisco! That was not fun. I also put in Monster's metal throw out bearing sleeve. This setup seems to take even more of a beating and it makes the same noise as factory. It's a bit of a steep learning curve to get used to it but then pretty darn smooth. People who drive my car have a hard time at first. LT1-S Twin Disc GEN5 Package - Rated at 700 RWHP/RWTQ - Type of Package: Premium Package ( Incl. Slave ) [P] - Flywheel Option: 28lb. Billet Steel Flywheel [28LBSLSx] "Our easiest clutch to drive that will hold a stout 700 rwhp, and be abused without mercy! This clutch is a fantastic unit that comes complete with all hardware and a billet steel flywheel. The LT1-S has been tested to in excess of 7,500 rpm’s without release issues and can be driven by a 100 lbs person easily. Great for the guys with n/a setups or power adders looking to daily drive their cars or take them to the track, this setup will do it all. Absolutely no chatter is to be expected of this unit, it will drive factory smooth!" Sent from my iPad using Tapatalk Pro __________________ 2013 1LE NPP GBE Mods Track Days Last edited by CrystalRedTintcoat; 12-03-2016 at 07:47 PM.*

02-10-2014, 01:14 PM	#211
Inferno1LE Drives: 2013 Inferno Orange 1SS 1LE Join Date: Feb 2013 Location: NJ Posts: 149 View My Garage	Well we learned that we could get automatics and everything will work, but then I won't know what to do with my left foot.

02-14-2014, 09:03 PM	#213
Inferno1LE Drives: 2013 Inferno Orange 1SS 1LE Join Date: Feb 2013 Location: NJ Posts: 149 View My Garage	Anyone heard of or tried this "Anti-Venom" mod? Essentially, you are shimming out the shift detent bolt to make the detent spring softer, which translates to smoother shifting. It originated from a mod for the T56, but seems to show promise for the TR6060 as well. It's very popular with the Vettes and Challengers. Here it is on the Vette forum: http://m.corvetteforum.com/c6-z06-di...ml?styleid=140

02-14-2014, 10:26 PM	#215
Inferno1LE Drives: 2013 Inferno Orange 1SS 1LE Join Date: Feb 2013 Location: NJ Posts: 149 View My Garage	It's there. Way up top on the passenger side in front of the shifter. It threads in horizontally.

12-03-2016, 05:03 PM	#216
scottmorton Drives: 2013 2SS 1LE Join Date: Nov 2012 Location: United States Posts: 14	So I broke down and convinced the local dealer to disassemble and inspect my transmission. My specific complaints were excessive noise when the clutch was engaged at idle, second gear grind. They replaced a crap load of bearings for which I was privy to seeing the input shaft bearing outer race which had scratches all the way around the bearing surface. Upon return, I am happy to say that the transmission shifts much better and the ridiculous slapping noise I forgot to mention to them is no longer present. If you still have a warranty I suggest you [convince them / let them] do the work. The transmissions are obviously not assembled to spec by the manufacturer. I will admit, there is still a notchy feeling to it to some degree especially cold, but a marked improvement none the less and certainly a very noticeable reduction in noise.