HUD installation HELP!!!!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

6Banga1LT · 07-20-2020, 07:19 PM

Hello, I am attempting the HUD installation on my 2014 1LT. I purchased the harness from Gen5diy and I’ve followed the directions listed on this forum to a T but I noticed that no where in the instructions does it describe where I need to plug in this blue harness connector. It says I need to run the cables behind the dash and connect where the 4 gauge cluster is but I have nothing in that area that looks anywhere near like what this plug should connect to. Any advise would be greatly appreciated.

davesnever · 07-21-2020, 01:36 PM

I have not done this myself but it looks like it may be an extra harness to connect to the 4 pack gauges that are mounted on the console at shifter. Maybe this description helps.

https://www.gen5diy.com/products/13-...ro-hud-harness

davesnever · 07-21-2020, 01:50 PM

Yeah here it is sold separately

https://www.gen5diy.com/products/cop...-gauge-harness

Passenger side kick panel location

gtstorey · 07-21-2020, 01:54 PM

Isn't that likely the gray wire in his picture above?

davesnever · 07-21-2020, 02:06 PM

Quote:

Originally Posted by gtstorey

Isn't that likely the gray wire in his picture above?

This big harness just mounts inline on the kick panel and feeds the 4-pack gauges on the console if you are installing those as well. But nothing to do with the HUD on dash.

gtstorey · 07-21-2020, 02:23 PM

Quote:

Originally Posted by davesnever

This big harness just mounts inline on the kick panel and feeds the 4-pack gauges on the console if you are installing those as well. But nothing to do with the HUD on dash.

Your right, miss read his question, and I really don't remember how I installed mine.

6Banga1LT · 07-21-2020, 11:07 PM

Thanks for your help guys. I was able to find the connector on the passenger side footwell as suggested. You guys both ended up being right. The blue 30 pin adapter is installed in-line with the factory connector. The harness adds 2 black connectors for the hud and the hud controller and 1 grey connector for powering the 4 gauge cluster.

07-20-2020, 07:19 PM	#1
6Banga1LT Drives: 2014 Chevy Camaro 1LT Join Date: Mar 2020 Location: Normal IL Posts: 3	HUD installation HELP!!!!! Hello, I am attempting the HUD installation on my 2014 1LT. I purchased the harness from Gen5diy and I’ve followed the directions listed on this forum to a T but I noticed that no where in the instructions does it describe where I need to plug in this blue harness connector. It says I need to run the cables behind the dash and connect where the 4 gauge cluster is but I have nothing in that area that looks anywhere near like what this plug should connect to. Any advise would be greatly appreciated. Attached Images

07-21-2020, 01:36 PM	#2
davesnever Drives: 2010 Camaro 2SS Join Date: Sep 2015 Location: Richmond Hill ,Ontario, Canada Posts: 780 View My Garage	I have not done this myself but it looks like it may be an extra harness to connect to the 4 pack gauges that are mounted on the console at shifter. Maybe this description helps. https://www.gen5diy.com/products/13-...ro-hud-harness

07-21-2020, 01:54 PM	#4
gtstorey Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017 Location: Huntsville, AL Posts: 2,155	Isn't that likely the gray wire in his picture above?

07-21-2020, 11:07 PM	#7
6Banga1LT Drives: 2014 Chevy Camaro 1LT Join Date: Mar 2020 Location: Normal IL Posts: 3	Thanks for your help guys. I was able to find the connector on the passenger side footwell as suggested. You guys both ended up being right. The blue 30 pin adapter is installed in-line with the factory connector. The harness adds 2 black connectors for the hud and the hud controller and 1 grey connector for powering the 4 gauge cluster.