03-29-2012, 11:26 AM | #1 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
Kjkjr27's IOM Build [COTW 9/16/13]
Attention:All right reserved. Any and all photos/videos found within this thread may not be copied, edited, reproduced, linked, or displayed in any form or by any means; electronic, mechanical, optical, or otherwise, without prior written permission from myself. If you wish to use any of the photos/videos found within this thread please send me a PM.
My story of getting my hands on a Camaro isn't as great as others that I have read. It first started in the early summer of '10 where I jokingly told my dad I wanted a Camaro and his response was "Yea, sure I will buy you a car model" Then towards the end of the summer my dad brought it up again that if I wanted one we would start looking into it. Fast forward to September '10 on my dad's birthday. My sister wanted to throw a surprise birthday for my dad and she wanted me to get him out of the house so she could set up. I didn't really know where to take my dad seeing how anywhere with food was out of the question since there would be a ton of food at the party. So once again jokingly I said "Let's go to the Chevy dealership". Surprisingly he agreed and we went. Two hours later we were walking out with a deposit down on an order for a very new 2011 2LT/RS IOM. I know it may seem wrong that I ended up with a new car on my dad's birthday but due to unfortunate family events I was able to pay for it outright myself, Thanks Ma love you and miss you everyday. Even though she passed before the 5th gen came out I know she would of loved these cars, she owned a couple firebirds. So fast forward to the Sunday after Thanksgiving Nov. 28th 2010 the day I picked up my beautiful IOM Camaro. It truly was love at first sight. Since then I have enjoyed her so much. So there is my Camaro story, not the best one ever but a story none the less. My goal for this build is to: 1. Increase performance (power,braking,handling) 2. Cosmetically make it one of a kind 3. Some Weight Reduction 4. Clean up the engine bay Now to get on with the mods: Current Mods Performance Engine Apex Catch Can 654 Roto Fab CAI 46 APEX Air Scoop and w/w relocator 63 LS3 Midpipe with MRT V2 51 Black Ice-olator 55 Trifecta Tune 140 Ported Throttle Body 91 145 MACE Stage 3 Ported IM 204 304 Au Magnetic Drain Plug Ceramic Coated BBK LTs with HFCs 483 17lb Braille Battery 641 Elite Engineering Clean Side Oil Separator Vitesse Motorsports Throttle Controller LFX intake manifold swap Brakes R1 Sloted/Drilled Rotors Front and Rear 377 453 Hawk HPS Pads 453 Suspension Pfadt Trailing arms 526 Pfadt Outer Trailing Arm Bushings 535 LSR Front and Rear Sway Bars 589 , 598 LSR Billet Toe Rods 635 Megan Racing Coilovers 635 HM Racing Design custom front and rear bars 634 LSR Adjustable Rear Endlinks 667 Drivetrain GM 8.6" Rear End with 3.91 gears 656 SS Axles 656 BMR Differential Bushings656 DSS Al 1-piece Driveshaft Cosmetic Interior AAC Amber footwell lights 8 9 LED Dome Light 50 Custom Painted Interior 53 103 425 Chrome door speaker rings 66 Orange powdercoated Aluminum Pedals 77 286 Illuminated Cup Holder 135 Protective Radio Face Cover Exterior Plasti-Dipped Tailight Bezels 35 36 Vinyl Rear Trunk Blackout 167 180 35% Tint on side quarter & rear windows 45 Gills 59 Custom Painted Bowties 390 432 AAC LED DRL 81 Windshield Decal 102 Matte Black 20x10 Nurburgring with 275/40-20 General G-MAX AS-03 110 DRL Harness 160 Matte Black NS-1 401 Black Acorn Gorilla Wheel Locks 453 Hex Vents 524 2 18x9.5 Corvette C6 Z06 with MT ET Street Radial 2 265/40/18 2 Cadillac Spares with MT Sportsman S/R 26x6x18LT Heritage Grill 651 Front Fascia Grill Blackout 654 IOM Painted 3D Fender Vents Engine Bay IOM Painted Fuze Box Cover 17 IOM Painted Throttle Body 145 IOM Painted Roto-fab CAI Box 46 IOM Painted Plenum Cover 290 304 IOM Painted Valve Covers 262 304 Custom Powdercoated Intake Manifold 273 304 Future Mods Prothane Subframe Inserts Trans Cooler *All future mods I currently have just aren't installed at the moment, or I have ordered* Some Car Details: Dyno Numbers: 249.3 rwhp??? 1/4 Mile Time: 10/12/13: 13.564 @ 102.51 (D.A 1186 Corrected: 13.396@103.8) Slip Mods: MRT v2, Roto fab CAI w/ air scoop, Rx Black Ice-olator, Ported TB, Trifecta Tune, Nurburgrings, General Gmax, Mace Stage 3 Ported IM, Rx Plenum Spacer, BBK Lts w/ HFC, Pfadt Trailing Arms and Outer Bushings, LSR Front and Rear Sway Bars, LSR Toe Rods, Megan Racing Coilovers, MT DRs with skinnies, Loss of ~250lbs Stock Today: Last edited by kjkjr27; 06-30-2016 at 01:58 PM. |
03-29-2012, 11:29 AM | #2 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
I am gonna use this post to try and do an as accurate weight changes as I can with each mod that has been added or what has been removed. Some things may be pointless to weigh but this is more for me to get an idea of what is going on lol.
Red= weight loss Green=Weight Gain Starting Weight: 3749 _________Estimated Weight: ~3469 --> 3600 with full tank Weight Loss: 280.4lbs Exhaust: Stock:48lbs MRT v2:19lbs --> 29lbs Wheels: Stock:124.6lbs Nurburgrings 20x10: 98lbs --> 26.6lbs Pirellis: Stock: 136lbs General G-Max 275/40/20: 120lbs --> 16lbs Lug Nuts: Stock: 3.14lbs Al Lug Nuts: 0.94lbs --> 2.2lbs Engine Cover: --> 2.5lbs Washer Bottle: 2lbs (empty) Apex Scoop and W/W Relocator (empty) 4lbs -->2lbs Spare Tire and Kit: --> 47.1lbs Apex Catch Can --> 2.98lbs Valve Covers (removing felt and oil extension tube) --> 1.19lbs Misc. Engine Stuff: --> 1.54lbs Stock Pedals: 0.15lbs Powdercoated Billet Pedals: 0.65lbs --> 0.5lbs Stock Rotors (front and rear) : 76.83lbs R1 slotted/drilled Rotors (front and rear): 73.76lbs --> 3.14lbs Remove Front Dash Speaker--> 0.68lbs Stock Headers and Cats:39lbs Ceramic Coated BBK Lts w/ HFC: 28.38 -->11.62lbs Stock Trailing arm and outer bushings: 6.06lbs Pfadt Trailing Arms and outer bushings: 5.12lbs --> 0.94lbs Stock Sway Bars: 11.74lbs LSR Sway Bars: 15.58lbs --> 3.84lbs Remove Rear Seat: --> -41.93lbs Stock bars: 41.28lbs HMR Custom Bars: 19.01lbs --> -22.2lbs Stock Toe Rods: 4.16lbs LSR Toe Rods: 2.5lbs --> 1.66lbs Stock Struts/Springs: 61.74lbs Megan Racing Coilovers: 43.04lbs --> 18.72lbs Stock Battery: 45.15lbs Braille 17lb Battery: 16.85lbs --> 28.3lbs Stock Grill with Bowtie and RS badge: 2.75lbs Heritage Grill: 2.13lbs --> 0.63lbs SS Rear Upgrade --> ??? Stock Drivehsaft: 23.15lbs DSS 1-piece Al Driveshaft: 24.94lbs -->1.79lbs Stock LLT Intake Manifold: LFX Intake Manifold: --> 11lbs Last edited by kjkjr27; 06-30-2016 at 02:04 PM. |
03-29-2012, 12:03 PM | #3 |
Smoked by a GIRL
|
Looks good!! Cant wait to see her with her mods
__________________
2014 2SS/RS Summit White w/ IOM interior "Powder 2.0"
|
03-29-2012, 12:11 PM | #4 |
|
Love that IOM
__________________
Jannetty Racing JRE Street Package
|
03-29-2012, 01:48 PM | #5 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
Thanks, I'll get more mods up as soon as the weather starts to be nice, according to the weather it is suppose to rain for the next couple days and I don't really have anywhere where I can work to get away from it.
|
03-29-2012, 07:27 PM | #6 |
Drives: 2014 Z51 Corvette Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,822
|
Congrats on getting a beautiful car.
|
03-29-2012, 07:56 PM | #7 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
Thanks all. So apparently I messed something up when I hooked up the footwell lights because they are not bright at all I can barely see them in the dark. I may just end up hooking them up to the grey wire to go on with the dome light instead of the purple one I connected them to although it is going to be a pain in the ass to take apart that kick panel cover again. I wonder though if the connection with the t-tap isn't great which may be causeing them to be very dim.
Last edited by kjkjr27; 10-06-2012 at 07:25 PM. |
04-03-2012, 02:57 PM | #8 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
So finally the weather was cooperating so I was able to try and fix my footwell lighting. From advice from other members I was able to find a different wire to connect my footwell lights to and right now in the day they seem to be brighter, I will have to see how bright later tonight. I connected them to the yellow wire that goes to the 4 gauge pack instead of the purple wire in the passenger side kick panel, the only down side is the lights have to be on for the footwell lights to be on but I guess in the end thats alright since I won't be able to see the footwell lights during the day anyways.
Where I originally have the lights connected to which made them dim. Where I connected them to How the lights look now that they are attached to the 4 gauge pack wire. Later tonight I will go out and take pictures of the lights when it is dark, I tired to take pictures of them when they were hooked up to the passenger kick panel wire but they were so dim they didn't show up when I took a picture. Here is a great DIY Thread for the footwell lights: http://www.camaro5.com/forums/showthread.php?t=54183 Last edited by kjkjr27; 12-10-2012 at 11:25 AM. |
04-04-2012, 12:05 PM | #9 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
Took a picture of my footwell lights at night, they came out much better than before, but still seem a little dim to me but its alright idc they work
|
04-04-2012, 01:23 PM | #10 |
HT5 COTW 9/3/2012
|
Looking good.
|
04-05-2012, 09:34 PM | #11 |
Smoked by a GIRL
|
Looks good
__________________
2014 2SS/RS Summit White w/ IOM interior "Powder 2.0"
|
04-09-2012, 03:02 PM | #12 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
Now today I decided to paint my fuze box cover IOM and I am almost done I am just torn between two decisions. I need some help deciding so please tell me which is better...with the lettering or without (the letters arent permanelty attached so please dont tell me they are not straight i know). Ending up going without the letters.
Last edited by kjkjr27; 10-06-2012 at 07:28 PM. |
04-09-2012, 03:11 PM | #13 |
Drives: 2010 Camaro 2SS/RS LS3 IOM Join Date: Feb 2012
Location: NY
Posts: 153
|
did you paint that yourself, if so can you tell me where you got the paint from? looks really good
|
04-09-2012, 03:14 PM | #14 |
COTW 9/16/13
Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012
Location: Syracuse
Posts: 10,089
|
Thanks yea I did, I bought the orange paint from http://www.automotivetouchup.com/choosecolor/year.aspx
and I got clear coat from Lowe's. The black paint is just flat black enamel paint that I use to do car models with. |
|
|
Tags |
12secbuild |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[COTW 3/21/11]: "MAC" | GB EB | Member Car Journals | 172 | 03-27-2014 06:50 PM |
SlowSS's Build Thread | SlowSS | Member Car Journals | 47 | 03-01-2014 11:20 AM |
HOW MUCH $$$ HAS CAMARO5 COST YOU? | GB EB | 5th Gen Camaro SS LS LT General Discussions | 117 | 02-18-2013 11:10 AM |
[COTW 11/29/10]: My 2011 IOM 2SS/RS's journey | lock | Member Car Journals | 66 | 06-08-2012 09:34 PM |
Blake's unique IOM | LED Crazy | Member Car Journals | 9 | 06-02-2011 12:49 AM |