01-07-2013, 04:58 PM | #1 |
Drives: 2LS Inferno Orange "PHOENIX" Join Date: May 2012
Location: WV
Posts: 681
|
Side turning signal tinting
I'm trying to tint my turning signals on the side of my car problem is I have a sheet of tint so I'm tryin to cut it to fit but having abit of trouble tried making my own template but that didn't work anyone have any advice
__________________
PHOENIX 323HP "LEGENDS NEVER DIE" |
01-07-2013, 04:59 PM | #2 |
Drives: 2SS RS Join Date: Mar 2010
Location: MD
Posts: 1,272
|
Toss your tint and buy overlays from bigworm?
Maybe take a sheet of paper and draw our the outline, transfer that to the tint and then cut?
__________________
Livernois 2C cam and tune, LS3 conversion, Roto-Fab intake, Kooks headers, DSS driveshaft and axles, BMR suspension parts, VMax ported throttle body, Whipple blower. (623hp).
|
01-07-2013, 05:54 PM | #3 | |
|
Quote:
|
|
01-07-2013, 08:01 PM | #4 |
Drives: 2LS Inferno Orange "PHOENIX" Join Date: May 2012
Location: WV
Posts: 681
|
Those look nice but I got this tint for free so I rather keep tryin to make it work its just tryin to cut its that's hard
__________________
PHOENIX 323HP "LEGENDS NEVER DIE" |
01-12-2013, 03:03 PM | #5 |
Drives: 2LS Inferno Orange "PHOENIX" Join Date: May 2012
Location: WV
Posts: 681
|
I saved money and tinted them with my dad got the tint for free and took about 30 minutes to do
__________________
PHOENIX 323HP "LEGENDS NEVER DIE" |
01-12-2013, 03:04 PM | #6 |
Drives: 2LS Inferno Orange "PHOENIX" Join Date: May 2012
Location: WV
Posts: 681
|
Another pic
__________________
PHOENIX 323HP "LEGENDS NEVER DIE" |
01-12-2013, 03:18 PM | #7 |
Get Some
Drives: 2014 ZL1 6Speed Join Date: Mar 2012
Location: The Wood's Edge, NM
Posts: 712
|
Have you tried removing the lights first? It takes a few seconds with a flat screwdriver.
__________________
|
01-12-2013, 03:18 PM | #8 |
Drives: 2011 5.7L Tundra Double-Cab X-SP Join Date: Mar 2012
Location: Birmingham, AL
Posts: 2,031
|
Looks good now paint those silver rings black and you're all set. Want an idea on what it will look like?
Grab one of them and pull on it, they snap right off in seconds. They will only fit back on one way so no worries there. Just line up the valve stem and the hole on the trim ring. Every since I pulled mine off I've hated them lol. Maybe it's just because I know they're made of plastic now |
01-12-2013, 03:49 PM | #9 |
Drives: 2LS Inferno Orange "PHOENIX" Join Date: May 2012
Location: WV
Posts: 681
|
I might try that thx
__________________
PHOENIX 323HP "LEGENDS NEVER DIE" |
01-12-2013, 03:55 PM | #10 |
Bigworm will fix you up
|
|
01-12-2013, 04:29 PM | #11 |
Drives: 2LS Inferno Orange "PHOENIX" Join Date: May 2012
Location: WV
Posts: 681
|
i rather like wht i did better then theres plus i did it for free
__________________
PHOENIX 323HP "LEGENDS NEVER DIE" |
|
|
|
|