11-07-2013, 08:19 AM | #15 |
Drives: 2013 IOM 2SS 1LE Join Date: Aug 2013
Location: Damascus Or
Posts: 403
|
As stated, higher pressure gives more air volume. The 2 stage will also run quieter and cooler as they run at a slower RPM. The added CFM flow ability is needed when using a bead blaster, die grinder, sander or other high volume air hog tool. I would steer clear of a oil less style compressor unless you plan on a very light duty use. They are noisy, run hot and do not last as long as the oil sump style.
__________________
|
11-07-2013, 04:44 PM | #16 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,720
|
Thx all, I ordered an IR 60gal single stage, 3hp I believe.
With the use it'll see I did not have the budget for a two stage. Thx again for all the input!
__________________
|
|
|
|
|