12-01-2012, 02:20 PM | #71 |
I want to add some mid-range in the back seat area with some 6.5" or shallow mount 8" mid-range speakers as shown in the photo below. Can I just tap into the existing 6x9's wires to run the new speakers? If so which wires are the woofers and not the tweeters? Also I cannot find the stock speaker specs anywhere, what ohm mid-range would be required to do this?
I want to use these! Punch Pro 6-3/4" midrange speaker with 4-ohm voice coil
__________________
2022 Black ZL1
RotoFab CAI, AWE Touring Edition Cat Back Exhaust. 665 Crank hp. est. and 660 Crank ft. lbs. est. Never been Dynoed |
|
01-16-2013, 07:01 PM | #72 | |
Drives: '12 Camaro LS V6 6MT, '09 CX9 GT Join Date: Mar 2011
Location: GTA
Posts: 269
|
Quote:
Can anyone share the pinouts of the 10 pin connector for the rear view mirror on a Camaro 2012 LS? I really need this also. |
|
03-21-2015, 05:24 PM | #73 |
Drives: IOM/IOM 2LT Join Date: Feb 2010
Location: Toronto
Posts: 44
|
DAMN THE IMAGES ARE MISSING
Anyone have the rear speaker wire colors wih Boston package to reference? I need to know which wire is pos or neg for the highs and sub signals. I'm bi-wiring some replacement 6x9s and cut out the old plugs from the dead speakers.
Ps. My car is half way apart right now to take out the old ones, this was way too many panels to remove, so any quick response would much appreciated!!! |
04-23-2015, 02:02 PM | #74 |
"Black Ace"
Drives: Supercharged 2010 SS, 2016 Golf R Join Date: Aug 2008
Location: Ft. Lauderdale, FL
Posts: 1,352
|
Anyone have a diagram of the connections on the head units (2010) and other connections behind the dash? My mechanic apparently forgot to hook the compass wiring back up after fixing my AC evaporator and every time I start the car I get a "Service Compass" msg on the DIC and the compass just reads "--" all the time.
I've searched this forum and Googled like crazy but continue to come up empty. Ughh!
__________________
2010 2SS/RS M6 "Black Ace" - Delivered 6/4/2009
Mods: Forged 416 LS3, Maggie TVS 2300 SC (~11 psi), custom cam (232/247, .630/.630, 118 LSA), 90-lb. injectors, ZL1 fuel pump & ADM controller, Alky Control meth kit, Monster LT1-SC twin-disk clutch, ZL1 drivetrain conversion w/ DSS 1000-HP axles & 1-pc. driveshaft, CAI Inc. intake w/ ADM scoop, XS Power full exhaust (1 7/8" LT headers with 3" off-road pipes), VMAX CNC-ported TB, LSR adjustable sway bars, LPE rear end-links, BMR 1" drop, BMR polyurethane bushings; UMI trailing arms & toe rods. Built & tuned by Kraftworks. 755 rwhp/708 rwtq |
04-23-2015, 02:50 PM | #75 |
|
Tell the mechanic to fix
__________________
2015 Corvette Z06.. Lime Rock Park 1:01; Watkins Glen 2:14; Thompson Speedway 1:21
|
07-31-2015, 08:47 AM | #76 |
Why would you make such a helpful post and then remove all the pics?!
__________________
|
|
11-24-2015, 09:13 PM | #77 |
VILENT
|
@stone SS. On one of the previous pages, everything was condensed to a zip file you can download. I was thinking the same thing when I found this thread. Like WTF?
|
10-01-2020, 01:12 PM | #78 |
LEXi is Sassy and Classy
Drives: 2012 Camaro 2LT RS Boston Acoustic Join Date: Mar 2014
Location: Toronto, Ontario
Posts: 510
|
Images no longer available.
|
03-17-2021, 11:22 PM | #79 |
Drives: 2015 2SSRS with headers, st4cam, ++ Join Date: Mar 2019
Location: PA
Posts: 2
|
since the photos seem not to work anymore, does anyone know of somewhere they are updated? Ordered a front end conversion for my 2015 2ssrs and the fogs are giving me one hell of an issue
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Garmin nuvi > mounting & wiring for the Camaro | 67 GTO | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 25 | 11-05-2011 12:52 PM |
Anyone have picts/info on the factory infotainment system wiring harness & plugs? | Matt'sSS | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 3 | 10-01-2009 12:48 AM |