Install Of AAC colorshift halos

[NyCTempting2LT]

I've been searching around and I haven't really found a thread discussing installing the colorshift halos with the stock halos.

As anyone done this and is there a thread detailing install instructions?

Is the light output affected in anyway by hiding the colorshift halo behind the stock halo?

[camaro4mybday]

nyc being the local aac dealer i can help you out with this. the color shift halo will work well behind the factory halo ring, its not the easiest things to do as far as opening the light but it is doable with the right tools

you can see for your self about how they work with the link.

[NyCTempting2LT]

Sounds good will be contacting you soon

[camaro4mybday]

When ever you are ready shoot me a pm or email

[NyCTempting2LT]

Another question maybe u can help me with....does the colorshift halos allow for the strobing effect that the regular aac halos have?? that video had no real strobing effect that i could see

[camaro4mybday]

https://www.facebook.com/video/video...=1830161364601

check out my facebook video, although it is a challanger its the multcolor lights going through its phases taken on a cell phone camera sorry for the low quality. also while you are at my page and check out the impala videos that was made to strobe for a volly fireman although single color i can make you strobe a single color

[NyCTempting2LT]

the lights for the impala had the exact effects im hoping the colorshift lights will be able to produce....

[camaro4mybday]

it wont happen with the aac color shift controller, but with some discussion and planing we can deffinitly make something wild happen for you

[NyCTempting2LT]

Pm sent!...I hope u can make it happen otherwise im gonna have to stick with the one color setup

[camaro4mybday]

replied

[Ivan @ Southwest Speed]

Please do install them BEHIND the factory Halo Rings.

They difuse the light better and keep it looking tight.

We install all ours that way.
Ivan

[camaro4mybday]

ivan how else would i install them there is only 1 way to install them, the right way, behind the factory ring

[FLRS]

In order to mount them behind the factory ring is there anything different that needs to be done or just follow the instructions that are provided by ACC?

[camaro4mybday]

Nytemptings lights came out great they ended up being a tri color setup, factory and a dualncolor ring. To get the ring behindnthevfactory ring it justvtakes a little grinding onnthe factory housing.