High flow cats that will work with long tube headers and corsa cat back - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Easton091 · 07-09-2013, 09:55 AM

Did a little searching online and only found cats that will work with shorty headers or oem manifolds. Anyone have this setup?

blazzin1 · 07-09-2013, 10:07 AM

If you have Kooks Headers (as stated in your signature), then you need to get your HF Cats from Kooks. There are several different collector flange styles depending on the manufacturer. Kooks will have CATS with the same flange style as your headers. They have the "Green" Cats too, that supposedly don't require a tune. The other end of the cats doesn't really matter too much. 95% of all cat-backs for the Camaro are all the standard 2-1/2" exhaust clamp connection (just like stock). So more than likely, the CATS will be a 3" in and 2-1/2" out.

Apex Motorsports · 07-09-2013, 01:26 PM

Quote:

Originally Posted by Easton091

Did a little searching online and only found cats that will work with shorty headers or oem manifolds. Anyone have this setup?

Quote:

Originally Posted by blazzin1

If you have Kooks Headers (as stated in your signature), then you need to get your HF Cats from Kooks. There are several different collector flange styles depending on the manufacturer. Kooks will have CATS with the same flange style as your headers. They have the "Green" Cats too, that supposedly don't require a tune. The other end of the cats doesn't really matter too much. 95% of all cat-backs for the Camaro are all the standard 2-1/2" exhaust clamp connection (just like stock). So more than likely, the CATS will be a 3" in and 2-1/2" out.

This. You need to get the proper cats for your headers.

Easton091 · 07-09-2013, 01:27 PM

Thanks for the responses. Any vendors have any good deals going on for these??

Apex Motorsports · 07-09-2013, 01:28 PM

Quote:

Originally Posted by Easton091

Thanks for the responses. Any vendors have any good deals going on for these??

Give us a shout.

blazzin1 · 07-09-2013, 01:56 PM

Quote:

Originally Posted by Easton091

Thanks for the responses. Any vendors have any good deals going on for these??

Quote:

Originally Posted by Apex Chase

Give us a shout.

If Chase has what you're looking for.....there's no need to shop anywhere else.....PERIOD!!!

Apex Motorsports · 07-09-2013, 07:11 PM

Quote:

Originally Posted by blazzin1

If Chase has what you're looking for.....there's no need to shop anywhere else.....PERIOD!!!

Thanks!

JDP Sales · 07-10-2013, 01:15 PM

Quote:

Originally Posted by Easton091

Thanks for the responses. Any vendors have any good deals going on for these??

We always have good deals on KOOKS

Best regards,

Tyler
888-308-6007

07-09-2013, 09:55 AM	#1
Easton091 Drives: 2011 Camaro SS Join Date: May 2012 Location: Sterling Heights, MI Posts: 425 View My Garage	High flow cats that will work with long tube headers and corsa cat back Did a little searching online and only found cats that will work with shorty headers or oem manifolds. Anyone have this setup? __________________ 2011 SS. K&N intake, Kooks stepped long tube headers with cat-less midpipes, Corsa exhaust, and tuned....

07-09-2013, 01:27 PM	#4
Easton091 Drives: 2011 Camaro SS Join Date: May 2012 Location: Sterling Heights, MI Posts: 425 View My Garage	Thanks for the responses. Any vendors have any good deals going on for these?? __________________ 2011 SS. K&N intake, Kooks stepped long tube headers with cat-less midpipes, Corsa exhaust, and tuned....

07-09-2013, 10:07 AM	#2
blazzin1 Drives: 2010 2SS/RS R6P Join Date: Nov 2008 Location: St. Cloud, FL Posts: 4,845 View My Garage	If you have Kooks Headers (as stated in your signature), then you need to get your HF Cats from Kooks. There are several different collector flange styles depending on the manufacturer. Kooks will have CATS with the same flange style as your headers. They have the "Green" Cats too, that supposedly don't require a tune. The other end of the cats doesn't really matter too much. 95% of all cat-backs for the Camaro are all the standard 2-1/2" exhaust clamp connection (just like stock). So more than likely, the CATS will be a 3" in and 2-1/2" out.