08-10-2020, 02:55 PM | #1 |
|
Different look for idatalink Cam1 kit
Figured I’d try fixing the color with the idatalink with some old silver vinyl I had laying around. It seems to match the other plastic trim better and I figure I’d do the Same with the console insert. I never liked the color mismatch idatalink face had in my 1ls.
I will be getting new vinyl that contours 1000 times better than this old stuff. Just wanted a visual first. I think I’ll cover up the front 4 accessory slots. Again, a lot of wrinkles and tears in this old vinyl. Comments? Last edited by SIM GhostrdrZ; 08-10-2020 at 04:05 PM. |
08-10-2020, 05:11 PM | #2 |
Drives: 2012 Camaro SS Convertible 6MT Join Date: Jun 2020
Location: Algonquin, IL
Posts: 258
|
Still think you should sell me the setup.
|
08-10-2020, 07:06 PM | #3 |
|
I guess I can counter your low ball offer game and for $600 I might think about pulling it all out. Only took 15 minutes max to install it since it’s all plug n” play. But I do like this setup so much better than the original stereo.
|
08-10-2020, 08:10 PM | #4 |
Drives: 2012 Camaro SS Convertible 6MT Join Date: Jun 2020
Location: Algonquin, IL
Posts: 258
|
Lol I offered you your full asking price. Enjoy!!!
|
08-10-2020, 09:01 PM | #5 |
|
That’s not exactly how it happened. It’s not that big of deal though, you low balled my already great price and I said I’ll just keep it and so I did. After many PM’s after I said I decided to keep it then you finally offered my asking price. I don’t mind negotiations but I had a great price listed and didn’t feel like taking less for it. It’d be different if I was selling it to feed my family but I’m not there, yet. So I will enjoy.
|
08-10-2020, 09:34 PM | #6 |
Drives: 2012 Camaro SS Convertible 6MT Join Date: Jun 2020
Location: Algonquin, IL
Posts: 258
|
I made an offer $50 under asking. You said no. Then offered $15 less than asking. Still no. Then full price. Still no. It’s fine. I can buy full price without blinking twice. I asked bc I wasn’t sure I wanted the idata kit. Like you said, no big deal. I’m glad you realized you wanted to keep and I’ll move on to the next deal. Hopefully you get the coloring the way you wanted. All the best.
|
08-11-2020, 12:39 AM | #7 |
I did something similar. I got my wrap guy to make the sides gloss black to match the top, but they couldn't do the lower portion. I am going to try myself to do it.
__________________
GHOST · 2SSRS
Order Date: March 28, 2009 // DoB: June 19, 2009 // Arrival Date: July 2, 2009 Current Modifications:
|
|
08-11-2020, 05:04 AM | #8 | |
|
Quote:
This is why I started the thread, to get ideas since maestro refused to get the color correct on the idatalink. It has pushed many potential customers away from their otherwise great product. I figured vinyl would change color and cover those 4 front accessory ports. |
|
08-13-2020, 01:40 PM | #9 |
|
Just got idatalink and center console installed. I went paint instead of vinyl. I left the gauges and traction control buttons factory color to kind of tie into the idatalink button bar color. There are probably plenty of folks that have color matched these kits to their own interior. I just wanted to prove to myself and hopefully everyone that’s been turned off by the “off color” of these kits, paint it whatever you want and have a great kit.
Thanks |
08-16-2020, 05:24 PM | #10 | ||
Drives: 2012 Chevrolet Camaro 2SS Coupe Join Date: Aug 2020
Location: West Orange NJ
Posts: 2
|
Quote:
|
||
03-22-2024, 04:42 AM | #11 |
Drives: 2010 Chevy Camaro 2SS coupe (MT) Join Date: Jan 2024
Location: Sacramento, CA - USA
Posts: 113
|
Did you ever have any issue with the lock/unlock button on the head unit not working? I have a Kenwood DMX709S head unit, and the touch screen controls for the heated seats and rear windshield defroster also don't work as well. The key fob lock and unlock buttons (separate) still work.
Also note that the door unlock/lock button on the center of the head unit, seems to only work when the door is opened and it briefly gives power. After the dome light goes off (if set to door open/close), the lock/unlock center console button no longer has power; that is, unless you either turn the key in the ignition, hit the locks on the key fob, or open the door. I tried checking all the fuses and relays, which are good and mainly in the engine bay fuse box. I even checked the 2nd fuse box that's in the driver side of the dash, on the side of the fan vent; nothing. I didn't bother going to the 3rd fuse "box" located in the trunk, under the carpet and mats, since I think there's nothing related there, not to mention it requires the trunk panels to be removed.... iMaestro dash kit buttons not working |
|
|
|
|