05-13-2013, 11:57 AM | #1 | |
Track > 1/4 Mile
|
Vortech V3 info
For those of you that are supercharged and looking at going with more boost, I was looking at Vortech's site and found the following:
Quote:
__________________
|
|
05-13-2013, 12:06 PM | #2 |
Cedar Creek Woodshop
|
Great info!
__________________
2014 Black 2SS/RS 1LE
|
05-13-2013, 12:12 PM | #3 |
Cedar Creek Woodshop
|
I regular blow off valve wouldn't be efficient enough?
__________________
2014 Black 2SS/RS 1LE
|
05-13-2013, 12:50 PM | #4 |
Track > 1/4 Mile
|
__________________
|
05-13-2013, 01:27 PM | #5 |
Drives: 2011 Camaro SS Join Date: Dec 2012
Location: Bradenton, FL
Posts: 2,610
|
|
05-13-2013, 02:39 PM | #6 |
for high boost JRE recommends two BOVs........
|
|
05-13-2013, 09:46 PM | #7 |
Drives: 2012 Camaro SS. L99 Join Date: Nov 2012
Location: Panama City FL
Posts: 113
|
[QUOTE=RBD;6538758]for high boost JRE recommends two BOVs........[/
Get a Vortech BV57 for high boost. Looks a lot better. Too. |
05-14-2013, 08:26 AM | #8 |
Rev Couture
Drives: 2010 LS Camaro & 2013 Rav4 Ltd Join Date: Jan 2010
Location: Jamlando, FL
Posts: 1,129
|
I dont think 10psi is considered high boost...
__________________
EBC Brakes| DOT 4|Bigworm| SickSpeed| BMR | IPF | Vararam| MRT |MGW | Nitto | Rx |
Iggee |ZL-1 Sways| Hurst | Apex Racing|Past: Srt-4| 6.0L GTO- RIP | '98 Integra |
05-14-2013, 05:27 PM | #9 |
Drives: Ly7 Join Date: Dec 2011
Location: bezza
Posts: 253
|
What size pulleys have you guys got standard on the v3s. And how much smaller is the pulley if you want 10psi?? Ive got 3.6" stock.and wanting 2.8 to 2.95"
|
05-14-2013, 05:35 PM | #10 |
Drives: 2011 Camaro SS Join Date: Dec 2012
Location: Bradenton, FL
Posts: 2,610
|
3.25" will run the blower a bit above the maximum rated impeller speed.. So I would not run a V3 Si or T with lower than that.
|
05-15-2013, 03:17 AM | #11 |
Drives: Ly7 Join Date: Dec 2011
Location: bezza
Posts: 253
|
Thanks for the information. I've got a V2 with a 928 impeller and some upgraded parts and been told max speed is around 62k rpm. With the impeller speed calculator says 2.9" will run about 56k but just don't know about belt slip.
|
05-15-2013, 10:07 AM | #12 | |
Drives: 2011 Camaro SS Join Date: Dec 2012
Location: Bradenton, FL
Posts: 2,610
|
Quote:
So what "kit" are you actually running? This is the BIG determining factor on belt slip. |
|
|
|
|
|