12-06-2009, 05:52 PM | #1 |
|
Build my garage.
I have a project on the go and I know I can count on the Camaro5 community to carry me through.
I want to build a garage! I started in July but the process of dealeing with the town and the various deptartments has taken its toll and I have backed off to regroup. We now plan on a May build so I have time to get it right. Here's your chance TJ! If you want to share what a garage needs, what you wish you had or some short comings of your own build. I would appreciate any input as I try to finalize the plans. I will add more info as we go along, so start with basics and we can get more technical later. Thanks to all
__________________
SPi Performance Stage 3 package Comp Cam
PHADT FE4 ZL Stg.3 VMAX CNC Spiral Ported Throttle Body Dynatech LT headers, Hi flow Cats MBRP 3" 304 stainless X-pipe exhaust Fastlane true CAI. Barton shifter |
12-06-2009, 06:10 PM | #2 |
Drives: Hoopdee Join Date: May 2009
Location: Detroit
Posts: 263
|
One thing to keep in mind, there never big enough. Bult a 24' x 24' pole barn 12 years ago, wish I would have went 24' x 32'. Its still nice though. Go as big as your wallet will allow.
__________________
2LT - CYBER GRAY METALLIC - BLACK RALLY STRIPES - MANUAL TRANNY - POLISHED 19" WHEELS BUILD - 6/12/2009 Airaid V2, Flowmaster AT |
12-06-2009, 06:20 PM | #3 |
|
Yes, size is important. I am looking at 1081 sq ft., 5 car ( 4 + workshop ), L shaped.
23' x 37' ( 4 car ) with a 10' x 23" side work shop/clean room.
__________________
SPi Performance Stage 3 package Comp Cam
PHADT FE4 ZL Stg.3 VMAX CNC Spiral Ported Throttle Body Dynatech LT headers, Hi flow Cats MBRP 3" 304 stainless X-pipe exhaust Fastlane true CAI. Barton shifter |
12-06-2009, 07:01 PM | #4 |
|
My 2 cents:
Make sure to wire it with more receptacles than you'd ever think you'll use. Pipe it for multiple drops for air.
__________________
|
12-06-2009, 07:30 PM | #5 |
Steve from Canada.
Drives: 2010 SW SS/RS with Inferno package. Join Date: Mar 2009
Location: Niagara Ontario Canada
Posts: 1,969
|
Plus a 220 outlet for the lift.
__________________
|
12-06-2009, 07:40 PM | #6 |
Account Suspended
Drives: 02 Silverado, 09 Vue, 10 1SS Join Date: Aug 2008
Location: Tired of apologizing when we should be kickin' butt!
Posts: 1,966
|
Fridge. Wet bar. BBQ pit. Big screen. Stripper pole.
|
12-06-2009, 08:32 PM | #7 |
68 RS
Drives: 1968 RS, 2010 SS2RS Join Date: Jul 2009
Location: Canada
Posts: 600
|
Here is my 2 cents.
Ensure that you have 10ft or 12ft ceilings. I recently installed a lift into my garage so that I could stack my Camaros for the winter. With 9ft 8 inches the fit is very tight. If I could get a foot or two it would make life much easier. The other suggestion that I have is that you install a side lift on your garage door rather than an overhead lift. The side lift has a self locking mechanism and is much more secure, in the case of a break and enter. |
12-06-2009, 09:04 PM | #8 | |
Drives: 1970 GTO Ragtop Join Date: Oct 2008
Location: Toronto
Posts: 325
|
Quote:
One last suggestion, for your man-door, if you are putting it close to one corner, move it at least 2'-0" from the corner so you build some shelves or put a compressor behind it thereby saving valuable space. Joe |
|
12-07-2009, 12:18 PM | #9 |
Drives: 1LT|RS|SIM|M6|BA Stereo Join Date: Jul 2009
Location: Brampton, Ontario
Posts: 1,838
|
i just would like gobs of space in my garage with an extra wide entrance...
i dont know what materials etc to use... just the simplistic things i can throw out there... - would like it to be really bright so id put a skylight or whatever its called... natural light = best ill add more as i think abt em
__________________
1LT | RS | M6 | SIM | BA Stereo 1000 - [07-23-2009] Order Made at dealer 1100 - [08-04-2009] Preliminary order accepted 2000 - [08-25-2009] Accepted by GM 3000 - [09-01-2009] Accepted by production control TPW = 10-05-2009 3300 - [09-28-2009] Scheduled for production 3400 - [10-01-2009] Broadcast - Being Built 3800 - [10-13-2009] Produced - Built- VIN 2G1xxx54917 4200 - [10-19-2009] Shipped 5000 - [10-19-2009] Delivered to the dealer 6000 - [10-20-2009] Delivered to the customer |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Before you build it GM, Dont make the same mistake twice... | 302 Wild Mouse | 5th Gen Camaro SS LS LT General Discussions | 86 | 05-19-2010 03:48 PM |
2010 Camaro SS Racecar build for NASA's American Iron series | Big-Foot | Camaro Photos | Spyshots | Video | Media Gallery | 75 | 10-21-2009 10:29 AM |
"Camaro on the way" but no build date?! | drtwo | Camaro Price | Ordering | Tracking | Dealers Discussions | 10 | 07-22-2009 06:33 PM |
Detroit News panel wants GM to build Camaro concept | Tran | 5th Gen Camaro SS LS LT General Discussions | 12 | 03-15-2009 04:38 PM |
Why An april build is just as good as a March build | Sean_W | Camaro Price | Ordering | Tracking | Dealers Discussions | 10 | 02-07-2009 02:51 PM |