04-05-2020, 08:52 AM | #505 | ||
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Quote:
Quote:
Thanks guys! Glad to see you all still hanging in there
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
||
04-05-2020, 11:57 AM | #506 |
Drives: 2013 Camaro SS Turbo Join Date: Apr 2014
Location: South Florida
Posts: 1,525
|
Thank you for taking the time to document as you go it is very cool to see step by step a build of this caliber!!
__________________
|
04-05-2020, 07:29 PM | #507 | |
Captain Gingerbeard
Drives: 2012 IOM RS/SS 6MT Join Date: Feb 2013
Location: West Twin Cities, MN
Posts: 2,489
|
Yeah, next time I head to Dayton, I'mma stop by. SURPRISE.
__________________
Custom ordered 2012 6MT RS/SS on 11/25/2011. Picked up 01/31/12.
Pedders Coilovers, BMR trailing arms and toe-links, Prothane solid poly subframe bushings, JDP Motorsports rear upper control arm bushings, Texas Speed long-tube headers with 2" primaries, modified fully 3" Magnaflow competition catback. CAI cold-air intake. DBA rotors, Hawk pads. Quote:
|
|
04-05-2020, 07:48 PM | #508 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Shoot me a message, you're welcome to stop by. I'm right off 75. Like less than 5 min off exit 156
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
04-09-2020, 03:47 PM | #509 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Started stripping the old fuel system off the car. Hoping to have the 5 gallon cell in by the weekend.
Made a drain using the lowest profile 90 I could find. Its definitely going to be a gamble if its gonna drain properly. Hoping the vacuum pump helps pull it.
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
04-10-2020, 01:04 PM | #510 |
|
Hell yeah
__________________
Car mods: never enough!
|
04-10-2020, 01:30 PM | #511 |
Drives: 2010 2SS LS3 and 1978 STROKER 383 Join Date: Feb 2018
Location: Czech Republic
Posts: 1,592
|
You are a madman
|
04-12-2020, 08:06 AM | #512 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Got the 5 gallon cell all mounted, trans cooler moved and tucked up out of the way of the wheelie bars, sheet metal patched and a quick coat of paint. Moved co2 bottle to trunk to try and get more weight back there. Put the primary injectors in the rails. Also measured for the fuel pump cable, will be needing a 12 ft one Removed turbo and used copper rtv to seal it up, took a bit of work to get it all lined back up but it went. After a heat cycle it will all settle and be easier to get off/on for sure. A buddy gave me a brand new sealed 5 gallon pale of VP M1. Should be enough for initial startup.
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
04-19-2020, 11:39 AM | #513 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Spent the day yesterday working on wiring. Got the wiring board I made mounted. Grommets and bulkheads installed in firewall. Cable made from grommet to starter. Engine harness is 100% installed. Boost leash is plumbed.
Just waiting on the rest of the fittings/lines to plumb the fuel system. Also need to pick up some more battery cable. This factory cable is like 1/0 and heavy af. Gonna go with a 2 or 4 gauge welding wire(have that in my other cars without issue). Edit- spent a few more hours today working on wiring. Just need to wire up my dash buttons, bump box, lights, and battery cables yet and its 100% wired. Filled the coolant system with water and it leaks behind the motor plate, out of the water pump holes. Have gaskets behind and in front of the plate. Will have to take that off and see what the deal is. Ordered a fireade 20lb fire suppression system. Not quite what I wanted to spend money on right now but I can't put a price tag on the car. I'm assuming this will add 30lbs or so back into the car as well
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
Last edited by ttshovel; 04-20-2020 at 10:43 PM. |
04-21-2020, 04:52 PM | #514 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Waterman cable showed up. Really impressed with how flexible this thing is. Have to strap it up yet but gonna fall perfectly behind the cell.
Rest of the fuel fittings and line showed up today. Made all the fuel rail/regulator lines. Just need to run feed/return/vent lines and that's done. Secondary injectors were barely short, picked up a set of 10mm spacers from vs racing. This pile is finally starting to come together again. Hang in there a little while longer guys
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
04-22-2020, 03:40 PM | #515 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Made another big purchase for the car. These are front coilovers specd by viscious performance/afterworks. The front springs are actually 125lb. 3-4 week lead time on them.
Got what I believe is the rest of the stuff I need for the car ordered as well
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
04-27-2020, 06:57 PM | #516 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Mounted the fuel pump cable and mounted the pump. Started making battery cables and running them to the front of the car. Finished plumbing the boost leash, bent and installed the egt sensors, installed the second set of injectors with the new fore innovations 10mm spacers, installed plugs and wires.
Installed some battery charging lugs on the back bumper as well. Also got around to dropping the transmission pan and installing the lokar locking dipstick.
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
04-29-2020, 06:59 PM | #517 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Got my egt bulkhead installed and wired them all. Got the fuel pump cable 100% done. Started making fuel lines to the rail. Got the bump box and fire system in the mail as well.
Gonna drop driveshaft off next week to be shortened, and pick up a drum of meth as well. Looking like I'll get to fire it next week and schedule tuning
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
05-01-2020, 05:00 PM | #518 |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Talked to John bewley formerly of ljms and dusty bradford of ptc. Got a cam specd for the 403" motor I posted about earlier in the thread.
Cam specs are 243/249 .632/.632 on a 116+5 Got a 1.40 a/r turbine housing ordered Converter shouldn't need a change Motor will consist of k1 crank and rods. Wiseco 5cc domes to give 12:1 compression Heads im thinking prc 260s
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
|
|
|
|