09-15-2024, 10:35 PM | #1 |
2015 z28 misfire
I have misfire with flashing engine light when I plug in scanner no codes came up , car feels like it’s lacking power bad
I don’t really lied dropping this car with mechanics ://// Any help advice where I should start wILL be appreciated Car has 24K miles , cam and heads been done with msd intake and katech TB
__________________
2015 Z28 #572 BLACK NO AC
|
|
09-16-2024, 05:05 AM | #2 |
Drives: 2013 zl1 vert Join Date: Dec 2018
Location: Rochester, New york
Posts: 1,054
|
use your scanner and look up the stored codes to see what the code was when it was flashing. could be just a bad fuel injector going out or a coil pack.
__________________
22% lower/ 2.5 upper/ 2” headers/ cat delete/ x-pipe/ 2 gallon x tank/ 100-3 pump/ fic 1300/ dsx aux kit/ 103mm throttle body/ RPM 5” intake/ meth kit/ prometh lid injection/FI interchiller/ 160* stat/ ngk-7/ msd wires/ elite catch can/ tsp cam/ Che trunnions/ ported supercharger/ 1/2” lid spacer/ brick mod/BMR toe and trailing arms/ 751hp 757 tq SAE @17.3lb on a loaded dyno.
|
09-16-2024, 09:16 AM | #3 |
Will do thank you
__________________
2015 Z28 #572 BLACK NO AC
|
|
09-16-2024, 05:16 PM | #4 |
Drives: 2013 Chevrolet Camaro ZL1 Join Date: Jun 2015
Location: Michigan
Posts: 49
|
Try to idenify the cylinder. Then get a compression test performed.
Let us know how you make out. |
09-16-2024, 09:08 PM | #5 |
Drives: Chevrolet Camaro Z28 (2015) Join Date: Feb 2023
Location: Washington state
Posts: 125
|
all great advices, but why don't you start from the spark plugs?
how many miles and years do they have? have you tried removing them and check them? sometimes the simplest answer is the right one
__________________
--
2015 Red Z/28. Seattle area |
09-17-2024, 01:13 PM | #6 |
6K on wires and plugs , coil pack look stock
__________________
2015 Z28 #572 BLACK NO AC
|
|
09-17-2024, 01:14 PM | #7 |
I will check soon and post what I found
__________________
2015 Z28 #572 BLACK NO AC
|
|
09-17-2024, 03:03 PM | #8 |
Drives: 2014 Z28 Join Date: Jun 2022
Location: Idaho
Posts: 22
|
You can purchase a cheap inferred heat gun at harbor freight and if you have headers (assuming) start the engine and hit the 8 header pipes coming out of the heads. This may show you which cylinder is the issue, then work from there. Plug wire, spark plug, coil and injector. You can test the coil by swapping to another cylinder and see if the problem stays or moves with the coil.
|
09-18-2024, 02:26 PM | #9 |
Drives: Camaro z28 Join Date: Mar 2021
Location: Clermont
Posts: 78
|
I have had those issues but my car always gave a code on what cylinder was missing firing. One turned out to be the plug wire was not fully one. So check that out first.
|
|
|
Thread Tools | |
|
|