05-05-2012, 09:41 AM | #1 |
LT headers
I was told that if i went with long tube headers because my car is lower, i will scrub. Anyone having this issue with springs or coilovers?
-Roto fab CAI -Muffler delete -1" PFADT springs -*much more to come |
|
05-05-2012, 09:54 AM | #2 |
|
Not likely. Mine is about 1" lower and never had a scrape.
|
05-06-2012, 08:21 PM | #3 |
Do you have cats? could you put up a pic of your cars stance?
|
|
05-07-2012, 06:19 AM | #4 |
Drives: My wife crazy with my C5 usage. Join Date: Apr 2009
Location: DFW
Posts: 6,558
|
It will depend on the brand. I am running BBK LTs and Eibach springs and sways with zero issues for 40k miles.
Sent from my iPhone using Tapatalk
__________________
UNDER CONSTRUCTION......again......
|
05-07-2012, 06:32 AM | #5 |
Drives: My wife crazy with my C5 usage. Join Date: Apr 2009
Location: DFW
Posts: 6,558
|
Sent from my iPhone using Tapatalk
__________________
UNDER CONSTRUCTION......again......
|
05-07-2012, 01:41 PM | #6 |
Drives: 2015 ZL1 Join Date: Aug 2011
Location: California
Posts: 1,731
|
I just went to coilovers with a 2" drop and no scraping yet. I have OBX headers with cats and Megan Racing coilovers.
__________________
"Want to know whats cooler than your murdered out Honda Civic? ...Any Audi." Daniel Tosh
|
05-07-2012, 01:52 PM | #7 |
Banned
Drives: 2010 2SS/RS Join Date: Feb 2012
Location: DA BOTTOM
Posts: 649
|
i have kooks longtubes with bmr 1.4in drop kit and no problems
|
05-07-2012, 02:05 PM | #8 |
05-07-2012, 02:14 PM | #9 |
|
I have LTs and Pfadt 1.25 " drop springs. I do scrape the HF cats going out of my driveway unless I go slow and one wheel at a time. When stock I went slow too but I didn't have to worry about angle and I did not scrape. I know that many will say they do not scrape and good for them. I also face the fact that my car is lower now because of the springs and the fact the HF cats sit a little lower than the stock cats - so if in doubt I creep and cut a sharp angle. And yes the exhaust is installed properly and as high and tight as it will go.
__________________
2016 Camaro 1SS Hyper Blue 6MT NPP
2010 Camaro 2SS Cam/Headers/CAI/3.91 gears 476 rwhp/440 rwtq (sold) |
05-07-2012, 03:21 PM | #10 | |
Quote:
|
||
05-08-2012, 08:09 AM | #11 | |
|
Quote:
I love all my mods and goodies - I'm not going back. The car looks great lowered, handles better with the sway bars and is bad azz with the cam and bolt-ons. A 1-2-3 WOT run with the cutouts open is down right awesome. So, go ahead and get your LTs and just use some caution and common sense - you'll be fine. Oh - and LTs with a muffler delete and no cats - everyone will hear you coming - that is one loud combo.
__________________
2016 Camaro 1SS Hyper Blue 6MT NPP
2010 Camaro 2SS Cam/Headers/CAI/3.91 gears 476 rwhp/440 rwtq (sold) Last edited by SSDan; 05-08-2012 at 08:24 AM. |
|
05-08-2012, 11:21 AM | #12 |
Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009
Location: Rio Rancho, NM
Posts: 12,170
|
2" LG Springs and not dragging or hitting unless I try hard....
Ivan @ Southwest Speed |
05-08-2012, 08:56 PM | #13 |
TSP 1 7/8" headers installed almost a year ago. Pedders coilovers installed 6 months ago with about 1" drop. NO scraping. The headers tuck up very nicely. Here's a couple of pics.
|
|
05-08-2012, 10:23 PM | #14 | |
Looks very nice
Quote:
What brand headers? and a couple other questions: Did you notice a big hp/tq gain? and im actually considering pedders coilovers;could you put some pics of the stance along with the undercarriage while its lowered? And lastly how low is it if you slam it??? |
||
|
|
|
|