The Perfect Storm - 2014 AGM 2LS A6 - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

GRAD2014RS · 06-23-2015, 12:51 PM

what did you tint your taillights with it looks good

StephenofSD · 06-23-2015, 01:04 PM

Quote:

Originally Posted by GRAD2014RS

what did you tint your taillights with it looks good

I bought the GTS Taillight covers that's all my man. I went the covers route because to me its a nice clean look, and they are easier to take off rather than tint or even spray.

Demon War Horse · 06-23-2015, 01:41 PM

Quote:

Originally Posted by StephenofSD

Well you're ride is sweet and to this day I still kick myself for not getting the SS...but oh well, I like the new Camaro so maybe in a year or so ill upgrade

But come on man you can't say on the couch when you drive what we drive!

Thanks for the compliment. As long as I keep taking my wife to Camaro events and she see's a mod she likes, I make a mental note. If she likes it, my odds go up dramatically.

GRAD2014RS · 06-23-2015, 01:58 PM

only if they had them for the rs version

StephenofSD · 06-23-2015, 03:57 PM

Quote:

Originally Posted by Demon War Horse

Thanks for the compliment. As long as I keep taking my wife to Camaro events and she see's a mod she likes, I make a mental note. If she likes it, my odds go up dramatically.

Haha I like your little routine you got going, take her to events and expose her to it all, she eventually will see something cool, you note it down then get it! I may need to steal that from you...haha.

What's your next hopeful mod though my man?

StephenofSD · 06-23-2015, 03:57 PM

Quote:

Originally Posted by GRAD2014RS

only if they had them for the rs version

Did you look? I thought they did but I'm not 100% sure on that.

Demon War Horse · 06-23-2015, 04:01 PM

Quote:

Originally Posted by StephenofSD

Haha I like your little routine you got going, take her to events and expose her to it all, she eventually will see something cool, you note it down then get it! I may need to steal that from you...haha.

What's your next hopeful mod though my man?

Hoping for ZL1 replica wheels.

Did the hood myself with a buddy, so on to the next thing. If I get wheels, it will be a while for a bigger mod again. Vinyl stuff is easier now, just takes time and patience (not a strong suit of mine). LOL

StephenofSD · 06-23-2015, 04:27 PM

Quote:

Originally Posted by Demon War Horse

Hoping for ZL1 replica wheels.

Did the hood myself with a buddy, so on to the next thing. If I get wheels, it will be a while for a bigger mod again. Vinyl stuff is easier now, just takes time and patience (not a strong suit of mine). LOL

Wheels are definitley on my list, shooting for the next mod I do to be them but we will see. Im really digging the MRR Z28 Replica Wheels. ANd I am the same as you, after a big mod purchase like that, I gotta stay calm for a while haha. Im sure you know as well as I do how hard it can be to hold back, plus needing permission from the lady

And I actuallydo want to do some wrapping but I need to get mine donw because I have a custom colored digi camo wrap I want to go with.

Demon War Horse · 06-23-2015, 04:36 PM

Quote:

Originally Posted by StephenofSD

Wheels are definitley on my list, shooting for the next mod I do to be them but we will see. Im really digging the MRR Z28 Replica Wheels. ANd I am the same as you, after a big mod purchase like that, I gotta stay calm for a while haha. Im sure you know as well as I do how hard it can be to hold back, plus needing permission from the lady

And I actuallydo want to do some wrapping but I need to get mine donw because I have a custom colored digi camo wrap I want to go with.

Sweet! Never seen the digi camo yet! The more shows we go to, my odds get better. Lol. I have plastidip to test out the black wheel thing, but it is damn hot here and humid, so I am holding off a bit. Got black matte base dip with a metallic top coat. Would give it a very dark gunmetal look. Might try this weekend.

Hood wrap was fun. Did the first one on my own, used help the second time and it is near perfect. Some vinyl is dry installed and some likes to be wet. Mine was 3M air release dry. Go slow and take your time. Use heat gun sparingly only when you need it.

StephenofSD · 06-23-2015, 04:40 PM

Quote:

Originally Posted by Demon War Horse

Sweet! Never seen the digi camo yet! The more shows we go to, my odds get better. Lol. I have plastidip to test out the black wheel thing, but it is damn hot here and humid, so I am holding off a bit. Got black matte base dip with a metallic top coat. Would give it a very dark gunmetal look. Might try this weekend.

Hood wrap was fun. Did the first one on my own, used help the second time and it is near perfect. Some vinyl is dry installed and some likes to be wet. Mine was 3M air release dry. Go slow and take your time. Use heat gun sparingly only when you need it.

Well I am planning to do the digi camo on the interior grey trim pieces that run along the dash and into the door panels, basically the parts that come colored on the 2SS. Im also thinking about incorporating some carbon fiber into the ride but not sure where I would do that... decisions decisions.
But just keep going to more and more shows man and you should be golden!

But the weather here in San Diego has been the same hot and humid, but I'm sure not nearly as bad as Texas...

Demon War Horse · 06-23-2015, 04:47 PM

Quote:

Originally Posted by StephenofSD

Well I am planning to do the digi camo on the interior grey trim pieces that run along the dash and into the door panels, basically the parts that come colored on the 2SS. Im also thinking about incorporating some carbon fiber into the ride but not sure where I would do that... decisions decisions.
But just keep going to more and more shows man and you should be golden!

But the weather here in San Diego has been the same hot and humid, but I'm sure not nearly as bad as Texas...

I did that trim in carbon fiber. Probably doing it again, but it comes out easy. The dash trim comes out easy with a trim tool. Well worth the $20 for the tools.

StephenofSD · 06-23-2015, 04:48 PM

Quote:

Originally Posted by Demon War Horse

I did that trim in carbon fiber. Probably doing it again, but it comes out easy. The dash trim comes out easy with a trim tool. Well worth the $20 for the tools.

SOunds good man, Ill try it out soon and post it up and let you know how it is!

Behic2320 · 06-23-2015, 04:50 PM

Quote:

Originally Posted by GRAD2014RS

only if they had them for the rs version

The RS taillights and non RS lights are the same shape the only difference is the LED interior. It will be the exact same part

StephenofSD · 06-23-2015, 04:52 PM

Quote:

Originally Posted by Behic2320

The RS taillights and non RS lights are the same shape the only difference is the LED interior. It will be the exact same part

Don't listen to him, he doesnt even have a Camaro anymore, he was too cool for it

But he is right, same shape so it will work

06-23-2015, 12:51 PM	#71
GRAD2014RS Drives: 2014 CAMARO 1LT RS Join Date: Jan 2015 Location: ALABAMA Posts: 255	what did you tint your taillights with it looks good __________________ CURRENT MODS: K&N 69 SERIES TYPHOON INTAKE SYSTEM, MRT V1 EXHAUST, 20% TINT ALL WEATHER CAMARO FLOOR MATS,PLASTI DIP EMBLEMS, ELITE ENGINEERING CATCH CAN SOLD

06-23-2015, 01:58 PM	#74
GRAD2014RS Drives: 2014 CAMARO 1LT RS Join Date: Jan 2015 Location: ALABAMA Posts: 255	only if they had them for the rs version __________________ CURRENT MODS: K&N 69 SERIES TYPHOON INTAKE SYSTEM, MRT V1 EXHAUST, 20% TINT ALL WEATHER CAMARO FLOOR MATS,PLASTI DIP EMBLEMS, ELITE ENGINEERING CATCH CAN SOLD